I am loving it! I’ve had it for a couple months now. It’s a ‘96. I replaced the input jack but all else is still stock. It’s like a Telecasters sibling. There’s a lot of overlap between them. The Dynasonics are awesome!
Re: your effects setup?
- i love sharin foo
- Mods
- Posts: 5666
- Joined: Tue Sep 12, 2006 8:26 am
- Location: Pittsburgh, PA
- Contact:
Re: your effects setup?
A death’s head ring upon his finger
- i love sharin foo
- Mods
- Posts: 5666
- Joined: Tue Sep 12, 2006 8:26 am
- Location: Pittsburgh, PA
- Contact:
Re: your effects setup?
My current Fuzz Factory is my fourth. The Bubble Font Sovtek is my fifth. Like half of the other pedals I have now, I’ve owned at least two or three previous times. I’m tired of that merry go round! I always go back and forth on stuff and it makes the most sense to hold onto it all. I can’t buy new stuff as often because I’m not selling what I already have, but I’m okay with that. I use a lot of different guitars and amps, so almost everything works out with something else.Ursa Minor wrote: ↑Fri Feb 16, 2024 3:59 pmSo guilty of this.zhivago wrote: ↑Fri Feb 16, 2024 2:50 pmOh god, yes...there's a handful of pedals that I have bought and sold at least three times, some as high as five timesi love sharin foo wrote: ↑Fri Feb 16, 2024 1:59 pmAt this point, I try to no longer sell gear. I’m tired of rebuying the same things over and overAs a result, there’s quite a surplus around these parts. It does keep things interesting.
![]()
...and they get more expensive each time I re-buy them! No more of that!!
![]()
A death’s head ring upon his finger
- zhivago
- Mods
- Posts: 21966
- Joined: Tue Sep 12, 2006 6:18 am
- Location: London, UK
Re: your effects setup?
You are in good company Justin!! I think I am on my fourth or fifth Fuzz Factory too!!
![Cheesy :D](./images/smilies/cheesy.gif)
![Embarrassed :-[](./images/smilies/embarrassed.gif)
![Cheesy :D](./images/smilies/cheesy.gif)
![Cheesy :D](./images/smilies/cheesy.gif)
![Cheesy :D](./images/smilies/cheesy.gif)
![Cheesy :D](./images/smilies/cheesy.gif)
Resident Spartan.
- i love sharin foo
- Mods
- Posts: 5666
- Joined: Tue Sep 12, 2006 8:26 am
- Location: Pittsburgh, PA
- Contact:
Re: your effects setup?
Definitely in good company
![Cool 8)](./images/smilies/cool.gif)
I have FINALLY figured the Fuzz Factory out. It only took 20 years. There’s so much more than the super trebly tones that I once that were always there no matter how you turned the knobs. I’ve finally find other sounds that are really usable. I’ll never sell this one. Well, maybe unless I found a sparkle one
![Shifty :shifty:](./images/smilies/shifty.gif)
A death’s head ring upon his finger
- sal paradise
- PAT. # 2.972.923
- Posts: 3662
- Joined: Thu May 27, 2021 12:41 am
Re: your effects setup?
At age 40, I finally realised that I could google recommended pedal settings. Mind-blowing what you can learn! I mention this because i bought a fuzz factory on a whim a while back. Rather than throw it out of the window, I decided to ask some friends, and suddenly I started to get a collection of usable sounds.i love sharin foo wrote: ↑Sat Feb 17, 2024 5:54 amDefinitely in good company![]()
I have FINALLY figured the Fuzz Factory out. It only took 20 years. There’s so much more than the super trebly tones that I once that were always there no matter how you turned the knobs. I’ve finally find other sounds that are really usable. I’ll never sell this one. Well, maybe unless I found a sparkle one![]()
So many pedals (particularly ones with 5 or more interactive controls) might not have been ditched before I found a use for them if I’d thought to do more than just my own, attention span-limited testing
I have nothing to offer anybody, except my own confusion?
- CS
- PAT. # 2.972.923
- Posts: 355
- Joined: Sat Dec 08, 2007 10:49 am
Re: your effects setup?
I've had a fuzz factory since 2000. I've got some settings that work with adjusting 9ne knobs for range of sounds ir theguitar volume. My favourite setting is what the fuzz if you've read the old harmony central list.
Last year I got a bliss factory. Woah thats complicated.
Last year I got a bliss factory. Woah thats complicated.
- thegreatbigsby
- PAT PEND
- Posts: 19
- Joined: Wed Jul 13, 2022 2:10 am
Re: your effects setup?
Would you fine Fuzz factory-fluent folks care to share some of your settings? It's the first boutique pedal I ever bought from overseas. So long ago, I had to be driven to the customs office to pick it up. Used it a bunch but not in the last couple of years. It seems to be too quiet until 9 on the dial, and then it's all out mayhem. Sound guys hate me, band colleagues at least raise a brow if they see me putting it on my board...
- CS
- PAT. # 2.972.923
- Posts: 355
- Joined: Sat Dec 08, 2007 10:49 am
Re: your effects setup?
OK o clock settimgs with vol on 9 everything. Adjust to taste and remember that they sound slightly different as components changed.
What the fuzz 97755 basically two on min two on max
Slackers live setting 9 9 12 3 9
And. 9 3 12 3 9 so basically it's a 1 knobs variable fuzz from feed back to distortion to splutter all by playing with the gate knobs.
93355 was on the zvex site it's been 20 years so I've forgotten what's it's called
9 min min min max. This is boring fuzz. Turn up the drive until it squeals then back off. This is a fuzzface type fuzz. Another variation is when it squeals stop it with the gate not backing off drive.
92 10 2 10 this is forgotten fuzz but I forget what it does but remember the 2 10 positions.
Basic stuff for making your own settings
Back off the volume when adjusting squeal is wearing
The control names are nominal. Stab is voltage I think at can be used as a tone control.
Gate andor comp will induce splutter
With comp at max drive is bypassed. So if your drive and comp are on full, backing off comp will make a huge difference to the gain.
You guitar volume knobs will do turn down cleans or control the pitch of the feedback depending how the pedal is set.
Unless you have a fuzzface sound keep guitar volume on full.
Tune the feedback to the key of the song.
What the fuzz 97755 basically two on min two on max
Slackers live setting 9 9 12 3 9
And. 9 3 12 3 9 so basically it's a 1 knobs variable fuzz from feed back to distortion to splutter all by playing with the gate knobs.
93355 was on the zvex site it's been 20 years so I've forgotten what's it's called
9 min min min max. This is boring fuzz. Turn up the drive until it squeals then back off. This is a fuzzface type fuzz. Another variation is when it squeals stop it with the gate not backing off drive.
92 10 2 10 this is forgotten fuzz but I forget what it does but remember the 2 10 positions.
Basic stuff for making your own settings
Back off the volume when adjusting squeal is wearing
The control names are nominal. Stab is voltage I think at can be used as a tone control.
Gate andor comp will induce splutter
With comp at max drive is bypassed. So if your drive and comp are on full, backing off comp will make a huge difference to the gain.
You guitar volume knobs will do turn down cleans or control the pitch of the feedback depending how the pedal is set.
Unless you have a fuzzface sound keep guitar volume on full.
Tune the feedback to the key of the song.
- OffYourFace
- Mods
- Posts: 13743
- Joined: Thu May 03, 2007 2:59 pm
- Location: Los Angeles, CA
Re: your effects setup?
current live board: Geetar -> tuner -> SD ViseGrip Comp -> Whammy 5 -> BD-2 -> RudeTech Chorus -> Moollon Delay -> '76 Deluxe Reverb
![Image](https://i.imgur.com/1ONfNLA.jpeg)
![Image](https://i.imgur.com/1ONfNLA.jpeg)
- thegreatbigsby
- PAT PEND
- Posts: 19
- Joined: Wed Jul 13, 2022 2:10 am
- JSett
- PAT. # 2.972.923
- Posts: 8969
- Joined: Mon Jun 01, 2009 1:33 pm
- Location: Old Hampshire, Old England
Re: your effects setup?
Added a Pigtronix Infinity 2 looper and a little LCD clock (we have an agreed 'quiet time' with our neighbours).
Annoyingly the pedal toppers are too big for the switches
![Image](https://i.ibb.co/zJYVVWT/PXL-20240222-210452346.jpg)
Annoyingly the pedal toppers are too big for the switches
![Image](https://i.ibb.co/zJYVVWT/PXL-20240222-210452346.jpg)
Silly Rabbit, don't you know scooped mids are for kids?
- i love sharin foo
- Mods
- Posts: 5666
- Joined: Tue Sep 12, 2006 8:26 am
- Location: Pittsburgh, PA
- Contact:
Re: your effects setup?
Do you have a hot glue gun? I bet a tiny squirt in the topper would be enough for it to squeeze out around the switch and hold it in place. It would most likely come back off later with a bit of force if you needed it to.
A death’s head ring upon his finger
- JSett
- PAT. # 2.972.923
- Posts: 8969
- Joined: Mon Jun 01, 2009 1:33 pm
- Location: Old Hampshire, Old England
Re: your effects setup?
Good idea. I do have one somewhere actually.i love sharin foo wrote: ↑Thu Feb 22, 2024 2:37 pmDo you have a hot glue gun? I bet a tiny squirt in the topper would be enough for it to squeeze out around the switch and hold it in place. It would most likely come back off later with a bit of force if you needed it to.
Somewhere in this house of chaos
![Cheesy :D](./images/smilies/cheesy.gif)
Silly Rabbit, don't you know scooped mids are for kids?
- tequila_in_teacups
- PAT. # 2.972.923
- Posts: 315
- Joined: Tue Apr 21, 2020 1:23 am
- Location: Aotearoa me Te Waipounamu New Zealand
Re: your effects setup?
Putting together a new board – something fairly simple and pragmatic. Just need to route power cables.
![Image](https://i.imgur.com/eaZyJNL.jpg)
The Dark Matter may get swapped out for something else, depending on how I feel about it.
![Image](https://i.imgur.com/eaZyJNL.jpg)
The Dark Matter may get swapped out for something else, depending on how I feel about it.
- MechaBulletBill
- PAT. # 2.972.923
- Posts: 2823
- Joined: Sat Nov 09, 2013 8:16 am
- Location: UK
Re: your effects setup?
digiverb before fuzz is very interesting. i'll have to try that!