Galanti Grand Prix circuit board pics

Discussion of vintage Jazzmasters, Jaguars, Bass VIs, Electric XIIs and any other offset-waist instruments.
Post Reply
User avatar
agabinet
PAT PEND
PAT PEND
Posts: 12
Joined: Sun Mar 10, 2019 8:39 am

Galanti Grand Prix circuit board pics

Post by agabinet » Thu Jun 13, 2019 3:01 am

https://link.shutterfly.com/Wv25r0IKsX

I took the circuit board off my set of pickups and switches from a four pickup GP. If you want to understand the circuit, look at the pics . . . It’s clearly three cap/resistor pairs. One works for the 1 and 4 pickups, 1 for the 2/3 combo, and the third, with a higher values, is the “muted” setting (which goes by “0” on the switch bank).

Hope this helps anyone who has to deal with this.

User avatar
TheGroke
PAT PEND
PAT PEND
Posts: 25
Joined: Tue May 02, 2017 1:12 pm

Re: Galanti Grand Prix circuit board pics

Post by TheGroke » Thu May 18, 2023 12:13 pm

Thanks! Do you know what is the best way to bypass the filtering? It it sufficient to just jumper over each component, or does it need something to be there.

User avatar
ludobag1
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 2543
Joined: Sun Nov 23, 2008 4:28 pm
Location: france

Re: Galanti Grand Prix circuit board pics

Post by ludobag1 » Fri May 19, 2023 1:49 am

yes just bypass it ,but you loose too much of the sound of this guitar,i have try and was not happy then re connect it ,the sheilding will help much more than disconnect the filtering

Post Reply