Toledo (Univox UC-2)

Discussion of vintage Jazzmasters, Jaguars, Bass VIs, Electric XIIs and any other offset-waist instruments.
Post Reply
User avatar
Pacafeliz
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 18518
Joined: Sun Jul 29, 2007 6:34 pm
Location: Cococologne, Germany

Re: Toledo (Univox UC-2)

Post by Pacafeliz » Sun Dec 26, 2010 6:05 pm

i'd try to hammer the next couple of frets a bit more into the fretboard... check if they haven't come a bit loose.
good luck!

Pat.
i love delay SO much ...that i procrastinate all the time.

User avatar
anubi
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 161
Joined: Wed Nov 24, 2010 4:42 pm

Re: Toledo (Univox UC-2)

Post by anubi » Sun Dec 26, 2010 6:39 pm

Pacafeliz wrote:i'd try to hammer the next couple of frets a bit more into the fretboard... check if they haven't come a bit loose.
good luck!

Pat.
problem kinda solved... the "A" note came back with a little hammering on the 6th fret... but it sounds kind of sitarish without distortion...

anyway, thanks for the helpful hint Pat!
Toledo UC-2, Squier JMJM | Yamaha RBX-270F
Boss ME-X [CS-3+OD-2r+OS-2], Boss ME-10, DOD DFX-94 | Boss ME-6B, Zoom 607
DeSalvo Tube30, Epiphone Firefly | Laney HCM-160B

User avatar
valley_parade
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 4408
Joined: Fri Oct 31, 2008 7:09 am
Location: The 315
Contact:

Re: Toledo (Univox UC-2)

Post by valley_parade » Tue Dec 28, 2010 10:23 am

Pacafeliz wrote:these pop up down here quite often, for cheap...

btw, did i sell my aria diamond to someone here? the 3-pup monster with the motorik trem? :-/

Pat.
I had your Aria Diamond Les Paulamajig that ended up with a Bigsby before I sold it..?

User avatar
mikethemod1992
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 82
Joined: Sat Jan 01, 2011 6:34 pm
Location: Snellville, Georgia

Re: Toledo (Univox UC-2)

Post by mikethemod1992 » Thu Jan 06, 2011 12:12 am

http://www.youtube.com/watch?v=g7o8aO96 ... re=related" onclick="window.open(this.href);return false;

Take a look at what i found in here.

User avatar
emanon313
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 569
Joined: Mon Oct 11, 2010 9:25 pm
Location: America's Hi-Five, Michigan

Re: Toledo (Univox UC-2)

Post by emanon313 » Thu Jan 06, 2011 9:31 pm

mikethemod1992 wrote:http://www.youtube.com/watch?v=g7o8aO96 ... re=related

Take a look at what i found in here.


Nice!
And if I'm not in a band, don't mean I'm square...and if I am, well then I don't care..

User avatar
anubi
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 161
Joined: Wed Nov 24, 2010 4:42 pm

Re: Toledo (Univox UC-2)

Post by anubi » Sat Jan 22, 2011 11:58 am

anubi wrote:
antisymmetric wrote:
anubi wrote:... now I only need another bone nut (this one is almost gone and strings are too low) and a vibrato arm replacement...
For the arm, that one on Ebay that theworkoffice mentioned should do the trick. Even a Strat arm with 10/32 thread would work
thank you man! I contacted the seller of that vibrato arm on ebay... he asked me about further details, and also said that '3/16" is a common diameter for vintage Japanese tremolo bars'... I just replied that thread is 10/32 and lenght just about 7-3/4"... I don't know about the '3/16" diameter', and I'm not used to inches either, we use the metric system here ;D
ok, I got the vibrato arm and it does not fit, because it is too skinny and is really loose...

now what!?
Toledo UC-2, Squier JMJM | Yamaha RBX-270F
Boss ME-X [CS-3+OD-2r+OS-2], Boss ME-10, DOD DFX-94 | Boss ME-6B, Zoom 607
DeSalvo Tube30, Epiphone Firefly | Laney HCM-160B

User avatar
Lennontv
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 334
Joined: Thu Oct 01, 2009 7:00 pm
Location: New Zealand

Re: Toledo (Univox UC-2)

Post by Lennontv » Sat Jan 22, 2011 2:21 pm

Oh my..your guitar is stunning. :?
how she sound? ive been drooling on these guitars for ages
We have wasted History like a bunch of drunks shooting dice back in the men's crapper of the local bar.

User avatar
anubi
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 161
Joined: Wed Nov 24, 2010 4:42 pm

Re: Toledo (Univox UC-2)

Post by anubi » Wed Feb 02, 2011 4:30 am

anubi wrote:
ok, I got the vibrato arm and it does not fit, because it is too skinny and is really loose...

now what!?
? ? ?
Toledo UC-2, Squier JMJM | Yamaha RBX-270F
Boss ME-X [CS-3+OD-2r+OS-2], Boss ME-10, DOD DFX-94 | Boss ME-6B, Zoom 607
DeSalvo Tube30, Epiphone Firefly | Laney HCM-160B

User avatar
antisymmetric
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 3601
Joined: Mon Apr 26, 2010 11:32 pm
Location: New Zealand

Re: Toledo (Univox UC-2)

Post by antisymmetric » Wed Feb 02, 2011 1:39 pm

Mine has a spring inside that the arm screws down on. If you could find one, it might help. I think Strats might have them, so you may be able to find one. Other than that, maybe a bit of thread tape wrapped around the arm would help.
Watching the corners turn corners

User avatar
LazerGuidedMelodies
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 60
Joined: Sun Jan 09, 2011 1:09 pm

Re: Toledo (Univox UC-2)

Post by LazerGuidedMelodies » Wed Feb 02, 2011 2:43 pm

Never actually seen a Toledo in the flesh,I had an Epiphone Et270 (Kurt Cobain had one on The Bleach album cover),but sold it last year,took me ages to find actually,as you dont find these kind of guitars for sale very often in England!I would love to have a go on one,but I dont think it'll ever come about.I only found the Epiphone whilst calling an advert for a Jazzmaster for sale years ago,got chatting to the guy,and he mentioned giving his son a Epiphone,I got the Epi instead of the Jazzmaster!Here is a pic of it on my photostream...
http://www.flickr.com/photos/58634281@N03/" onclick="window.open(this.href);return false;

User avatar
anubi
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 161
Joined: Wed Nov 24, 2010 4:42 pm

Re: Toledo (Univox UC-2)

Post by anubi » Wed Feb 02, 2011 4:03 pm

antisymmetric wrote:Mine has a spring inside that the arm screws down on. If you could find one, it might help. I think Strats might have them, so you may be able to find one. Other than that, maybe a bit of thread tape wrapped around the arm would help.
yeah, I too thought about the tape solution, but since I can return the bar to the seller and get another one in exchange, I wouldn't want to ruin the whammy bar...

anyway, is the bar on your guitar a 10/32 thread? it seems to me (but I might be wrong) that the threading in the tremolo hole is a bit ruined, so I'm not even 100% sure that a thicker threaded whammy would work...

so, got to find the right spring, I suppose...
Last edited by anubi on Wed Feb 02, 2011 4:04 pm, edited 1 time in total.
Toledo UC-2, Squier JMJM | Yamaha RBX-270F
Boss ME-X [CS-3+OD-2r+OS-2], Boss ME-10, DOD DFX-94 | Boss ME-6B, Zoom 607
DeSalvo Tube30, Epiphone Firefly | Laney HCM-160B

User avatar
anubi
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 161
Joined: Wed Nov 24, 2010 4:42 pm

Re: Toledo (Univox UC-2)

Post by anubi » Sun Apr 10, 2011 9:43 am

Image
Image

same guitar, different brand!

it's from ebay, so if anyone wants to take a look... http://cgi.ebay.com/Vintage-Aria-Electr ... 0552101894
Toledo UC-2, Squier JMJM | Yamaha RBX-270F
Boss ME-X [CS-3+OD-2r+OS-2], Boss ME-10, DOD DFX-94 | Boss ME-6B, Zoom 607
DeSalvo Tube30, Epiphone Firefly | Laney HCM-160B

User avatar
vr6pilot
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 132
Joined: Fri May 13, 2011 7:29 pm
Location: New Mexico!

Re: Toledo (Univox UC-2)

Post by vr6pilot » Fri May 13, 2011 8:28 pm

So, I've got one of these...actual Univox, mid 60s, with the sunburst finish which is in decent condition for its age but def not perfect.
I've been toying with the idea of having mine refinished in surf green and fabbing a new pickguard in white. What do y'all think? Awesome project idea or blasphemy?

User avatar
anubi
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 161
Joined: Wed Nov 24, 2010 4:42 pm

Re: Toledo (Univox UC-2)

Post by anubi » Mon May 16, 2011 6:45 am

vr6pilot wrote:So, I've got one of these...actual Univox, mid 60s, with the sunburst finish which is in decent condition for its age but def not perfect.
I've been toying with the idea of having mine refinished in surf green and fabbing a new pickguard in white. What do y'all think? Awesome project idea or blasphemy?
I think the pickguard should be impossible to find...

about the color, I don't like sunburst either, anyway half the beauty of my guitar is the finish, i.e. how it has degraded over the years... you can't tell this from the pictures, anyway the color is not pure white at all, but in many places it has yellowed a lot, so the guitar really shows its age... and that's of course what we're looking for in vintage guitars...
a new finish will make the guitar look like any cheapo new squier out there, so unless you manage to make it look like it's almost 50 years old, I would not touch it... just my 0,02 anyway...
Toledo UC-2, Squier JMJM | Yamaha RBX-270F
Boss ME-X [CS-3+OD-2r+OS-2], Boss ME-10, DOD DFX-94 | Boss ME-6B, Zoom 607
DeSalvo Tube30, Epiphone Firefly | Laney HCM-160B

User avatar
vr6pilot
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 132
Joined: Fri May 13, 2011 7:29 pm
Location: New Mexico!

Re: Toledo (Univox UC-2)

Post by vr6pilot » Mon May 16, 2011 6:01 pm

...and I appreciate your two cents. You make some good points, all of which I've been pondering at length. I've been torn about not wanting to desecrate an antique vs. making a decent player out of a guitar just isn't living up to it's potential. I've aired my thoughts and concerns out on internet forums and all but the bottom line is: There's just no serious collector value here.

Not to mention, this thing isn't a great player. The bone nut is chipped, the tone pot is frozen in place, the pickguard is curled a tad, and the selector switch gets knocked out of the neck position whenever I strum (poor placement, IMO) To be worth anything to a player, it must play and some things need to be changed in order to achieve that. Otherwise, I'm just looking at it and it doesn't look too hot.

Post Reply