We need a new Bridge Champion
- mackerelmint
- PAT. # 2.972.923
- Posts: 13674
- Joined: Sun May 05, 2013 9:51 pm
- Location: トイレ国、ウンチ市
Re: We need a new Bridge Champion
I wonder if the increased hardness of the stainless would negate any advantages of having less material to tap, and I also wonder if the triangular profile might make hard to get threaded straight, which would also increase likelihood of a broken tap.
I've given up on the idea of stainless, personally. I think nickel plating mild steel would be a more practical way to protect the saddles from corrosion, even though it's an extra step.
I've given up on the idea of stainless, personally. I think nickel plating mild steel would be a more practical way to protect the saddles from corrosion, even though it's an extra step.
This is an excellent rectangle
- ThePearDream
- PAT. # 2.972.923
- Posts: 2084
- Joined: Sun Jun 25, 2017 6:18 am
- Location: Detroit
- Contact:
Re: We need a new Bridge Champion
You are right about the stainless steel. I looked at the material options through the other service (Sculpteo) and I can get this latest design done in nickel plated steel/bronze for about $26 with shipping. That's half the cost of the round ones from Shapeways. The triangular shape doesn't concern me. It's a right triangle, so I know that the back edge is perpendicular to the hole.mackerelmint wrote: ↑Mon Oct 08, 2018 2:17 pmI wonder if the increased hardness of the stainless would negate any advantages of having less material to tap, and I also wonder if the triangular profile might make hard to get threaded straight, which would also increase likelihood of a broken tap.
I've given up on the idea of stainless, personally. I think nickel plating mild steel would be a more practical way to protect the saddles from corrosion, even though it's an extra step.
I'm not too hung up on stainless either, or recreating the staytrem for that matter. I'd be perfectly happy with adjustable saddles as long the bits were machined to a close enough tolerance that the screws wouldn't loosen up on their own, there weren't any weird gaps, and the string spacing was right. Basically, I just want a better made version of the Squier modified mustang with 52mm string spacing.
Doug
@dpcannafax
@dpcannafax
- mackerelmint
- PAT. # 2.972.923
- Posts: 13674
- Joined: Sun May 05, 2013 9:51 pm
- Location: トイレ国、ウンチ市
Re: We need a new Bridge Champion
Ah, ok. I got the impression from the picture that it was more of an isoscolescent type of triangle.
So is that $26 for a whole set, or is that per saddle?
I'm pretty much the same as you, I just wanna make saddles with a 52mm spread that people can drop into the stock bridge, and a gizmo to lock the bridge in place for people who want that. Reinventing the wheel just isn't that interesting.
So is that $26 for a whole set, or is that per saddle?
I'm pretty much the same as you, I just wanna make saddles with a 52mm spread that people can drop into the stock bridge, and a gizmo to lock the bridge in place for people who want that. Reinventing the wheel just isn't that interesting.
This is an excellent rectangle
- timtam
- PAT. # 2.972.923
- Posts: 2739
- Joined: Sun Oct 22, 2017 2:42 am
- Location: Melbourne
Re: We need a new Bridge Champion
Google says 'Did you mean: obsolescent or isosceles cat' ?mackerelmint wrote: ↑Mon Oct 08, 2018 3:41 pmI got the impression from the picture that it was more of an isoscolescent type of triangle.
"I just knew I wanted to make a sound that was the complete opposite of a Les Paul, and that’s pretty much a Jaguar." Rowland S. Howard.
- ThePearDream
- PAT. # 2.972.923
- Posts: 2084
- Joined: Sun Jun 25, 2017 6:18 am
- Location: Detroit
- Contact:
Re: We need a new Bridge Champion
That's the price for a set. Assuming this new service does a good job, and I can tap them okay, I'll be pretty happy with $26.
I did buy some 9¢ nylon washers from my local hardware store and was able to hand thread them onto the bridge height screws. It really firmed things up, but I haven't tested it out on a guitar yet. I thought it was worth a try for 18¢.
I did buy some 9¢ nylon washers from my local hardware store and was able to hand thread them onto the bridge height screws. It really firmed things up, but I haven't tested it out on a guitar yet. I thought it was worth a try for 18¢.
Doug
@dpcannafax
@dpcannafax
- jvin248
- PAT. # 2.972.923
- Posts: 660
- Joined: Mon Apr 11, 2016 5:34 pm
Re: We need a new Bridge Champion
.
If you are breaking taps ... the main variables are technique and what diameter hole you drilled. Technique is just practice, no way around that (quarter turn cut, back off to break the chip, another quarter turn cut, back off, and repeat all the way through). Diameter of the drill bit is critical for taping and look up a table online or an old Machinery's Handbook to get you started. Don't rely on the 3D printing to 'get you close'.
also, use your CAD package and lay out 7.5, 9.5, and 12 inch radius circles, make a cube 52mm long, and bring the arcs down to that cube so you see the radius for a bridge. There is barely any difference between them (yes, the Internet goes crazy sorting between them) but they are very similar; 9.5 to 7.5 crown to crown is 0.4mm or 0.016inch while 9.5 to 12 is 0.3mm or 0.012inch. Quite likely that a mixup at 'the factory' will happen frequently or users installing them when given a choice between two sets in a package.
The Mastery saddles have such large arcs cut in them (and noted some still get strings popping out) but they are designed to handle thin to thick rope strings. JMs out of all the guitar models used get the biggest strings put on them 'for tone'. You may need set proliferation more for string upsize projects than for neck radius.
As another bridge to consider for design research, there is the PRS Vela. It's not a retrofit candidate but similar to Mastery.
.
If you are breaking taps ... the main variables are technique and what diameter hole you drilled. Technique is just practice, no way around that (quarter turn cut, back off to break the chip, another quarter turn cut, back off, and repeat all the way through). Diameter of the drill bit is critical for taping and look up a table online or an old Machinery's Handbook to get you started. Don't rely on the 3D printing to 'get you close'.
also, use your CAD package and lay out 7.5, 9.5, and 12 inch radius circles, make a cube 52mm long, and bring the arcs down to that cube so you see the radius for a bridge. There is barely any difference between them (yes, the Internet goes crazy sorting between them) but they are very similar; 9.5 to 7.5 crown to crown is 0.4mm or 0.016inch while 9.5 to 12 is 0.3mm or 0.012inch. Quite likely that a mixup at 'the factory' will happen frequently or users installing them when given a choice between two sets in a package.
The Mastery saddles have such large arcs cut in them (and noted some still get strings popping out) but they are designed to handle thin to thick rope strings. JMs out of all the guitar models used get the biggest strings put on them 'for tone'. You may need set proliferation more for string upsize projects than for neck radius.
As another bridge to consider for design research, there is the PRS Vela. It's not a retrofit candidate but similar to Mastery.
.
- ThePearDream
- PAT. # 2.972.923
- Posts: 2084
- Joined: Sun Jun 25, 2017 6:18 am
- Location: Detroit
- Contact:
Re: We need a new Bridge Champion
I appreciate the tapping adivice. I definitely have the right size hole (I drilled out the 3d printed hole with the appropriate size drill bit), and have been going nice and slow with plenty of cutting oil as well. I believe my issue is from the small tap size being a bit delicate, combined with not having a dedicated tapping fixture to keep everything steady.
Not only is the difference in radius so slight at the bridge - but, a 9.5" radius neck is only 9.5" at the fretboard. Once you account for frets and string height, you are looking at more like a 9.75-10" string radius. As I mentioned earlier, my preference would be for adjustable height saddles rather than fixed height, but I'm clearly not ready to tap 18 holes yet. I personally don't care if my saddles are at an exact, precise radius. I'd rather have full control over individual saddle height (and intonation) so I can adjust to suit each particular guitar. Mastery bridges and the like are simply a non-starter for me, regardless of how well they're made.
Something I might look at while i wait for my new saddles to be printed, is to redrill intonation screw holes to fit a set of 6 tele saddles (with the offset intonation screws).
Not only is the difference in radius so slight at the bridge - but, a 9.5" radius neck is only 9.5" at the fretboard. Once you account for frets and string height, you are looking at more like a 9.75-10" string radius. As I mentioned earlier, my preference would be for adjustable height saddles rather than fixed height, but I'm clearly not ready to tap 18 holes yet. I personally don't care if my saddles are at an exact, precise radius. I'd rather have full control over individual saddle height (and intonation) so I can adjust to suit each particular guitar. Mastery bridges and the like are simply a non-starter for me, regardless of how well they're made.
Something I might look at while i wait for my new saddles to be printed, is to redrill intonation screw holes to fit a set of 6 tele saddles (with the offset intonation screws).
Doug
@dpcannafax
@dpcannafax
- mackerelmint
- PAT. # 2.972.923
- Posts: 13674
- Joined: Sun May 05, 2013 9:51 pm
- Location: トイレ国、ウンチ市
Re: We need a new Bridge Champion
Google's way behind. I've been using "isoscelescent" for years now.timtam wrote: ↑Mon Oct 08, 2018 3:45 pmGoogle says 'Did you mean: obsolescent or isosceles cat' ?mackerelmint wrote: ↑Mon Oct 08, 2018 3:41 pmI got the impression from the picture that it was more of an isoscolescent type of triangle.
This is an excellent rectangle
- mackerelmint
- PAT. # 2.972.923
- Posts: 13674
- Joined: Sun May 05, 2013 9:51 pm
- Location: トイレ国、ウンチ市
Re: We need a new Bridge Champion
Well, shit. That's tough to beat. I'll buy a set at that price if they're good.ThePearDream wrote: ↑Mon Oct 08, 2018 3:48 pmThat's the price for a set. Assuming this new service does a good job, and I can tap them okay, I'll be pretty happy with $26.
I did buy some 9¢ nylon washers from my local hardware store and was able to hand thread them onto the bridge height screws. It really firmed things up, but I haven't tested it out on a guitar yet. I thought it was worth a try for 18¢.
This is an excellent rectangle
- Deed_Poll
- PAT. # 2.972.923
- Posts: 3209
- Joined: Sun Dec 23, 2012 9:24 am
- Location: Brighton, UK
Re: We need a new Bridge Champion
I've been wanting to do something like a PRS Wraparound on spikes... We'll see if I get anywhere!
I like the idea of an unintonable offset bridge. I figure overall intonation adjustment isn't strictly necessary since it's a rocking bridge anyway, so has that degree of flexibility built in...
Work on my own vibrato is coming along quite nicely! I'll post on it when it's ready.
Cheers!
I like the idea of an unintonable offset bridge. I figure overall intonation adjustment isn't strictly necessary since it's a rocking bridge anyway, so has that degree of flexibility built in...
Work on my own vibrato is coming along quite nicely! I'll post on it when it's ready.
Cheers!
Owner Operator of GuitarForm - Custom Offset Guitar Bodies
www.guitarform.com ◈ @guitar_form
www.guitarform.com ◈ @guitar_form
- Unicorn Warrior
- PAT. # 2.972.923
- Posts: 3510
- Joined: Sun Jul 22, 2012 5:58 pm
- Location: Kentucky, USA
Re: We need a new Bridge Champion
Yes! Mr Poll. Yes!!!Deed_Poll wrote: ↑Thu Oct 11, 2018 3:28 pmI've been wanting to do something like a PRS Wraparound on spikes... We'll see if I get anywhere!
I like the idea of an unintonable offset bridge. I figure overall intonation adjustment isn't strictly necessary since it's a rocking bridge anyway, so has that degree of flexibility built in...
Work on my own vibrato is coming along quite nicely! I'll post on it when it's ready.
Cheers!
- arkivel
- PAT. # 2.972.923
- Posts: 1073
- Joined: Tue Apr 29, 2008 6:30 pm
- Location: Kitsilano
Re: We need a new Bridge Champion
I think the main advantage of the Mastery is that it is machined out of brass, fine polished, and then plated with hard chrome. The staytrem does not have finely polished saddle grooves and this is why its not a good idea to fix the posts.
- politicalEconomist
- PAT PEND
- Posts: 32
- Joined: Sat Feb 03, 2018 9:21 am
Re: We need a new Bridge Champion
Just bumping this to see if there have been any updates on finding a new source for Staytrem like bridges. Specifically for the JMJM family.
- alexpigment
- PAT. # 2.972.923
- Posts: 863
- Joined: Mon Jun 04, 2018 3:02 pm
Re: We need a new Bridge Champion
American Professional bridge. I personally took the legs off with pliers and drilled out the holes slightly so it sat on the AOM posts, but there’s another method mentioned here that sounds cool:politicalEconomist wrote: ↑Tue May 21, 2019 9:55 amJust bumping this to see if there have been any updates on finding a new source for Staytrem like bridges. Specifically for the JMJM family.
http://www.offsetguitars.com/forums/vie ... 0#p1564024
- loveinathens
- PAT. # 2.972.923
- Posts: 1400
- Joined: Wed Jun 15, 2011 9:03 pm
- Location: Manila, Philippines
Re: We need a new Bridge Champion
Can someone just PLEASE make a set of Mustang saddles in various radii????? Sets for like, 9.5" and 12" should be swell for those of us rocking custom and/or modern necks.