My friend has one that is double-cut, thin line, set neck with P90s and TOM bridge. Essentially only vaguely a tele, but it’s cool. Not sure about neck scale though.tylerforyou wrote: ↑Sat Dec 08, 2018 10:45 pmSquire also did a set neck, thinline, double humbucker tele in 24.75 in their master series. I had a natural one. I was in love with the look, but I never quite got on with it.
Has Fender/Squier ever released a Jazzmaster with ...
- kgbAttack
- PAT. # 2.972.923
- Posts: 225
- Joined: Mon Dec 11, 2017 10:30 am
- Location: Europe
Re: Has Fender/Squier ever released a Jazzmaster with ...
- Francer
- PAT. # 2.972.923
- Posts: 519
- Joined: Mon Sep 14, 2015 10:11 am
- Location: Uk
Re: Has Fender/Squier ever released a Jazzmaster with ...
Almost certainly not what you had in mind with your question so I’m only really posting for novelty value but ...
It does say Fender and Jazzmaster on the headstock*
* for people from future civilisations, if you’re reading this and the link is dead, it’s a Fender Japan Champ Jazzmaster with built in speaker.
It does say Fender and Jazzmaster on the headstock*
* for people from future civilisations, if you’re reading this and the link is dead, it’s a Fender Japan Champ Jazzmaster with built in speaker.
- Kent
- PAT. # 2.972.923
- Posts: 741
- Joined: Fri Apr 06, 2007 2:56 am
- Location: Vienna, Austria
- Contact:
- Lame Pseudonym
- PAT. # 2.972.923
- Posts: 130
- Joined: Sun Sep 12, 2010 3:15 pm
Re: Has Fender/Squier ever released a Jazzmaster with ...
Oh, I'm building one just this very minute. In fact, the only reason I'm here is that I'm goofing off from filing the frets.
The body is from an Affinity Jazzmaster I bought in a store brand new just to do this. The neck is from a (mumble,mumble). It doesn't take much to make it work, just shave maybe 3-4mm off the butt end of the neck. But I haven't assembled it yet, so I might have to modify my calculations if reality intervenes.
The thing is I love love love Jazzmasters with all the"features" removed, and I really prefer the sound of the Gibson scale.
The body is from an Affinity Jazzmaster I bought in a store brand new just to do this. The neck is from a (mumble,mumble). It doesn't take much to make it work, just shave maybe 3-4mm off the butt end of the neck. But I haven't assembled it yet, so I might have to modify my calculations if reality intervenes.
The thing is I love love love Jazzmasters with all the"features" removed, and I really prefer the sound of the Gibson scale.