I've been using a special edition LPB Classic Player for a while now, and decided that I want a vintage-correct Jazzmaster. I just snagged a sexy late 90s CIJ CAR JM66 off Reverb with matching headstock, and already ordered a set of Novak pickups to put in there.
My main question is, where can I get a pickguard for this model, ideally gold anodized? Are there other compatible models that fit?
This comes with the original bridge as well as another non-threaded one with adjustable saddles. I think I'll be fine with one of those, so probably don't need an upgrade there. Anything else? Creative wiring ideas? I put a series/parallel switch in my CP, and use the fatter series tone a lot, so I'll probably do that again.
JM66 Pickguards
- NICQ
- PAT. # 2.972.923
- Posts: 844
- Joined: Tue Dec 10, 2013 12:49 am
- Location: Vienna, Austria
Re: JM66 Pickguards
Allparts pickguards are MIJ and not AVRI if I remember correctly.. they have a anodized gold as well
- VIVIVI
- PAT PEND
- Posts: 18
- Joined: Sun Sep 04, 2011 8:38 am
- NICQ
- PAT. # 2.972.923
- Posts: 844
- Joined: Tue Dec 10, 2013 12:49 am
- Location: Vienna, Austria
Re: JM66 Pickguards
ok sorry -. maybe they fixed that - couple of years ago they only had one size and it claimed to be us spec but was mij (first hand experience as I bought a tort pg back then)
- MattK
- PAT. # 2.972.923
- Posts: 3623
- Joined: Sun Aug 10, 2008 9:51 pm
- Location: Hobart, Australia
Re: JM66 Pickguards
I bought an Allparts JM guard and it fit my MIJ. You can tell by the curve above the bridge pickup - on a Japanese guard it runs parallel to the top of the pickup but on a US guard it curves in close to the corner of the pickup.
viewtopic.php?f=8&t=65927
viewtopic.php?f=8&t=65927
- VIVIVI
- PAT PEND
- Posts: 18
- Joined: Sun Sep 04, 2011 8:38 am
Re: JM66 Pickguards
I saw something on the Allparts (maybe UK?) that claimed the plastic ones "usually" fit MIJ, but not the gold. Oh well...just got the guitar today and think I'm ok with the plain ol' white.MatthewK wrote: ↑Tue Jun 11, 2019 3:39 pmI bought an Allparts JM guard and it fit my MIJ. You can tell by the curve above the bridge pickup - on a Japanese guard it runs parallel to the top of the pickup but on a US guard it curves in close to the corner of the pickup.
viewtopic.php?f=8&t=65927