3-way series selector

For help with setups and other technical issues.
Post Reply
User avatar
jorri
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 2000
Joined: Thu May 07, 2009 1:53 am
Location: bath, UK
Contact:

3-way series selector

Post by jorri » Fri Jul 05, 2019 7:39 am

Would this work? I have a 3 pickup warmoth JM.
Thinking i will try allowing two series switches: N-M and N-B.

So i have 3 2-way and one 3-way all slide switches, using the 2-way as bridge, middle, N-B series...

... Then the 3-way is a combined series into the middle, parallel or off for the neck.

12
34
56
78

1=neck hot
2=unused
3=mid ground
4=neck hot
5=ground
6=out
7=mid ground
8=unused

So basically a standard series switch, but the last two pins cut the neck going to output, and retain the middle ground connection.

Probably would work on a mustang with phase on the other switch or something. Thanks.

User avatar
jorri
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 2000
Joined: Thu May 07, 2009 1:53 am
Location: bath, UK
Contact:

Re: 3-way series selector

Post by jorri » Fri Jul 05, 2019 7:44 am

Does it matter which pickup comes first in series? Does 3 pickups in series suck? I basically like seriesNM+parallel bridge a LOT which i use currently.

Post Reply