On a Jag or Jazz, are there screws that mount to the upper control plate to the rollers?
If so, what size are they? I would assume they are different than the screws that mount the plate to the body as they would be wood screws.
thanks
Jag screws on switch and control plates
- bbqbrisket
- PAT. # 2.972.923
- Posts: 61
- Joined: Sun Jun 29, 2014 7:00 am
- selectomatic
- PAT. # 2.972.923
- Posts: 369
- Joined: Tue Jan 11, 2011 6:30 am
Re: Jag screws on switch and control plates
Yes, there are roller/switch screws that screw into brackets beneath the plate. They are different from the plate-holding screws; as you said, the former are metal screws, the latter are wood screws.
The wood screws are 13 mm long overall, with OD of 3 mm. The metal screws are 6 mm long, 2 mm across the threads.
The wood screws are 13 mm long overall, with OD of 3 mm. The metal screws are 6 mm long, 2 mm across the threads.
- bbqbrisket
- PAT. # 2.972.923
- Posts: 61
- Joined: Sun Jun 29, 2014 7:00 am
Re: Jag screws on switch and control plates
****PERFECT****
Thank you
Thank you