new projects

[chadmo1]

That is sexy.

[finboy]

A bit of wiring and adding the last plate, this is about as far as I can go until I get a J-O-B

[finboy]

Cross guitars be killing it

[finboy]

Doing my first paint work, headstock for my bass vi. Clearly it isn't perfect, but I am about to wet sand a run and some orange peel out of the clear in prep for the decal, then more clear.

[finboy]

Shit tonnes of sanding and polishing later, ready for the decal, then a bunch more clear/sand/polish/repeat



There are some scratches under the clear as I should have smoothed it out more, but it doesn't bother me too much, learning experience and all that. I actually think these will be harder to see with a lot more clear over top.

[finboy]

More progress, if got the decal on and clear coated, sanded down, and the next coat on, now another 24 hours and more sanding.

Black ink still visible at the right angles...

[finboy]

I think I tagged the decal a bit, so I am going to clear it once more, but this is what the decal looks like *mostly* finished, with a 3 stage polish. Getting close!

[finboy]

Good enough for me...





Waiting on some parts, as soon as I sell a neck I will order a bridge from staytrem and calling it pretty much finished

[CROSS_guitars]

seven string Tele update.

[finboy]

seven string Tele update.

Swanky

[CROSS_guitars]

I have radiused the board to 7 1/4" and bashed the first fret in.







Finboy. I have managed to get the neck heel width to 65mm. Which will give the strings plenty of clearance. Yay!

[finboy]

*happy dance*

[ARAMP1]

I have radiused the board to 7 1/4" and bashed the first fret in.







Finboy. I have managed to get the neck heel width to 65mm. Which will give the strings plenty of clearance. Yay!

So much WIN!

[finboy]

Guard came in today, just waiting on covers and bridge

[CROSS_guitars]

Getting there.