Roadhouse Build thread

Talk about modding or building your own guitar from scratch.
User avatar
Rgand
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1171
Joined: Sun Mar 05, 2017 3:55 pm

Roadhouse Build thread

Post by Rgand » Sat Aug 11, 2018 8:04 am

After considerable re-working of the Telerauder design, I now have patterns that fit the case I bought. I have a beautiful piece of mahogany for the next guitar and have started on that.

After moving the cardboard template all over both sides of it, trying different angles and such, I found a way to best take advantage of the wonderful grain pattern in it. As you can see, it's the same look as the Telerauder but it is not the same at all. I just massaged the patterns to keep the main characteristics looking the same.
Image

I'm still working over my router table to have a chip removal vacuum system so I can work without quite so much mess. As soon as that is done, I'll get the body routed. Right now the shape is roughed in and waiting with the first pattern screwed to it.

Here's the design drawing of how it will look. Of course, things will vary slightly in the actual build but it will be close to this unless I change my mind about the color. Even if I change the color, I want to take advantage of the grain, which isn't included in the drawing.
Image

User avatar
Shadoweclipse13
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 12435
Joined: Fri Feb 07, 2014 9:22 pm
Location: Stuck in the dimension of imagination

Re: Roadhouse Build thread

Post by Shadoweclipse13 » Sat Aug 11, 2018 9:25 am

Amazing! Watching this one!!
Pickup Switching Mad Scientist
http://www.offsetguitars.com/forums/viewtopic.php?f=8&t=104282&p=1438384#p1438384

User avatar
ThePearDream
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 2072
Joined: Sun Jun 25, 2017 6:18 am
Location: Detroit
Contact:

Re: Roadhouse Build thread

Post by ThePearDream » Sat Aug 11, 2018 9:55 am

This will be very cool. What's the plan for the tele trem bridge?
Doug
@dpcannafax

User avatar
marqueemoon
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 7343
Joined: Mon Jun 20, 2016 9:37 pm
Location: Seattle

Re: Roadhouse Build thread

Post by marqueemoon » Sat Aug 11, 2018 10:26 am

I love how the grain follows the contours of the body.

User avatar
Rgand
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1171
Joined: Sun Mar 05, 2017 3:55 pm

Re: Roadhouse Build thread

Post by Rgand » Sat Aug 11, 2018 10:43 am

Thanks, all.
ThePearDream wrote:
Sat Aug 11, 2018 9:55 am
This will be very cool. What's the plan for the tele trem bridge?
The bridge is a Trem King. They offer three models, I'll be using the TKS-2. The bridge is a hardtail bridge in that it mounts solid on the body. The vibrato works by the moving the tone block to increase or decrease string tension. it should have outstanding tone transfer between body and strings.

User avatar
s_mcsleazy
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 18423
Joined: Thu Jul 28, 2011 7:30 am
Location: glasgow

Re: Roadhouse Build thread

Post by s_mcsleazy » Sat Aug 11, 2018 11:51 am

kinda like is peavy made a talman
offset guitars resident bass player.
'Are you trying to seduce me Mrs Robinson? Or do you just want me to solder a couple of resistors into your Muff?'

User avatar
oid
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 834
Joined: Sat Feb 10, 2018 8:19 pm

Re: Roadhouse Build thread

Post by oid » Sat Aug 11, 2018 1:54 pm

What is the purpose of routing out the wood completely where the neck pocket out have been? Never seen that before. Curious to see what you are doing there.

It looks like it is going to end up being a fine looking instrument, I will be watching the progress.
Logic gates based on billiard-ball computer designs have also been made to operate using live soldier crabs of the species Mictyris guinotae in place of the billiard balls.

User avatar
Rgand
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1171
Joined: Sun Mar 05, 2017 3:55 pm

Re: Roadhouse Build thread

Post by Rgand » Sat Aug 11, 2018 2:43 pm

s_mcsleazy wrote:
Sat Aug 11, 2018 11:51 am
kinda like is peavy made a talman
I suppose it could look similar.
oid wrote:
Sat Aug 11, 2018 1:54 pm
What is the purpose of routing out the wood completely where the neck pocket out have been? Never seen that before. Curious to see what you are doing there.
The photo of the template also has the pickguard template laid on it. I left the neck pocket area on that just for placement within the outline. That won't get routed out like that.
oid wrote:
Sat Aug 11, 2018 1:54 pm
It looks like it is going to end up being a fine looking instrument, I will be watching the progress.
Thanks, I'll post as things come along.

User avatar
oid
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 834
Joined: Sat Feb 10, 2018 8:19 pm

Re: Roadhouse Build thread

Post by oid » Sat Aug 11, 2018 3:28 pm

Rgand wrote:
Sat Aug 11, 2018 2:43 pm
The photo of the template also has the pickguard template laid on it. I left the neck pocket area on that just for placement within the outline. That won't get routed out like that.
Ahhh! An optical illusion, my eyes locked onto it as a cutout body sitting on top of cardboard, that makes much more sense, clears up your post a bit as well. It is to hot to think.

I can no longer see even a hint of what I saw before, funny how the brain can process information sometimes.
Logic gates based on billiard-ball computer designs have also been made to operate using live soldier crabs of the species Mictyris guinotae in place of the billiard balls.

User avatar
Rgand
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1171
Joined: Sun Mar 05, 2017 3:55 pm

Re: Roadhouse Build thread

Post by Rgand » Sat Aug 11, 2018 3:49 pm

oid wrote:
Sat Aug 11, 2018 3:28 pm
Rgand wrote:
Sat Aug 11, 2018 2:43 pm
The photo of the template also has the pickguard template laid on it. I left the neck pocket area on that just for placement within the outline. That won't get routed out like that.
Ahhh! An optical illusion, my eyes locked onto it as a cutout body sitting on top of cardboard, that makes much more sense, clears up your post a bit as well. It is to hot to think.

I can no longer see even a hint of what I saw before, funny how the brain can process information sometimes.
We all have had our eyes play tricks with us at some time or another.

User avatar
blimpage
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 312
Joined: Tue Jul 11, 2017 3:43 am
Location: Melbourne, Australia

Re: Roadhouse Build thread

Post by blimpage » Sat Aug 11, 2018 8:28 pm

marqueemoon wrote:
Sat Aug 11, 2018 10:26 am
I love how the grain follows the contours of the body.
Heck yeah, that slab has clearly been dreaming of being a guitar for a long time.

User avatar
Rgand
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1171
Joined: Sun Mar 05, 2017 3:55 pm

Re: Roadhouse Build thread

Post by Rgand » Sat Aug 11, 2018 10:04 pm

blimpage wrote:
Sat Aug 11, 2018 8:28 pm
marqueemoon wrote:
Sat Aug 11, 2018 10:26 am
I love how the grain follows the contours of the body.
Heck yeah, that slab has clearly been dreaming of being a guitar for a long time.
You are probably right.

User avatar
Rgand
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1171
Joined: Sun Mar 05, 2017 3:55 pm

Re: Roadhouse Build thread

Post by Rgand » Mon Sep 17, 2018 4:54 pm

I just realized that I hadn't updated for a while. I got the neck ready with a newly cut headstock and steel neck screw inserts. Still working on the body. I got sidetracked making improvements and repairs on my bandsaw (the switch gave up and i had to install a new one, updated to a grounded safety switch), air compressor and router table. Anyway, here's the neck.

Image

This photo isn't the same neck but it shows the same type of inserts I used.

Image

User avatar
Rgand
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1171
Joined: Sun Mar 05, 2017 3:55 pm

Re: Roadhouse Build thread

Post by Rgand » Sun Sep 30, 2018 1:07 pm

I've been making improvements my bandsaw and router table, amongst other tools. Still I managed to make a bunch of templates and get some work done so here's a quick update.

So far I have all the routing done except for the roundovers and comfort contours. The spring cavity ended up a slight bit shallow due to the depth of the pickup cavities but I should be able to make the springs work in the .680" I have to work with.

Image

Image

User avatar
ThePearDream
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 2072
Joined: Sun Jun 25, 2017 6:18 am
Location: Detroit
Contact:

Re: Roadhouse Build thread

Post by ThePearDream » Sun Sep 30, 2018 4:35 pm

Looking good, that grain is really nice. What are you doing for pickups?
Doug
@dpcannafax

Post Reply