I have a Mustang 90 on order. Unlike many guitars the string spacing isn't listed in the specs. I have found inconclusive info whether the string spacing is 2 1/16 (MIM standard) or 2 3/16 (MIM vintage). I am curious because I'd like to order a Callaham hardtail and wasn't certain which model to order for the offset series mustangs.
Also, does anyone have experience putting a Callaham on an MIM offset series mustang. I'm assuming if I figure out the correct string spacing it should be a drop in replacement? Thank you,
Fender Offset Series Hardtail Bridge
- Vijaya807
- PAT PEND
- Posts: 11
- Joined: Thu Nov 22, 2018 4:02 am
-
- PAT. # 2.972.923
- Posts: 136
- Joined: Sun Mar 17, 2013 8:12 pm
Re: Fender Offset Series Hardtail Bridge
Warmoth has a whole page with bridge routes and measurements:
https://www.warmoth.com/Guitar/Bodies/O ... ions.aspx
Dont know about the string spacing on those. You can wait till you get the guitar then measure.
https://www.warmoth.com/Guitar/Bodies/O ... ions.aspx
Dont know about the string spacing on those. You can wait till you get the guitar then measure.
- Gordon
- PAT. # 2.972.923
- Posts: 1510
- Joined: Fri Jun 29, 2007 8:22 am
- Location: France/USA/Singapore
- Contact:
Re: Fender Offset Series Hardtail Bridge
Here it says 52mm at bridge for the Duo-Sonic, and 52.8mm for the Mustang 90, although they share the same bridge: https://guitar.com/review/fender-duo-sonic-mustang/
On my Must-O-Sonic, I use a Hipshot bridge. Drop-in replacement, Stewmac lists it as being 52.8mm (2-1/16").
https://www.stewmac.com/Hardware_and_Pa ... ridge.html
On my Must-O-Sonic, I use a Hipshot bridge. Drop-in replacement, Stewmac lists it as being 52.8mm (2-1/16").
https://www.stewmac.com/Hardware_and_Pa ... ridge.html
Graphic designer (comics stuff, Doctor Who, Star Wars...): https://www.instagram.com/monsieurgordon/ \o/
- natthu
- PAT. # 2.972.923
- Posts: 2740
- Joined: Sat Aug 13, 2011 4:30 am
- Location: Adelaide, Australia
- Rgand
- PAT. # 2.972.923
- Posts: 1171
- Joined: Sun Mar 05, 2017 3:55 pm
Re: Fender Offset Series Hardtail Bridge
Man, that's beautiful. I like the gold on silver. Classy.
- Vijaya807
- PAT PEND
- Posts: 11
- Joined: Thu Nov 22, 2018 4:02 am
Re: Fender Offset Series Hardtail Bridge
Thanks! 2 1/16 seems to be right. I also looked at the Callahan vintage (2 7/32) vs American standard (2 1/16). The vintage seems to go almost right to the end of the plate whereas the mustang 90 has some space. I ended up ordering the callaham American standard hardtail 2 1/16. Should be here about the same time as the guitar.
Your silver and gold looks great. Nice custom guard crossing the duosonic I and the mustang / duosonic II guard. Also would like to try a hip shot sometime. I am just used to the regular bent steel style saddles. I got my mustang 90 in that silver sparkle. Seems like a great color.
Your silver and gold looks great. Nice custom guard crossing the duosonic I and the mustang / duosonic II guard. Also would like to try a hip shot sometime. I am just used to the regular bent steel style saddles. I got my mustang 90 in that silver sparkle. Seems like a great color.
- Rgand
- PAT. # 2.972.923
- Posts: 1171
- Joined: Sun Mar 05, 2017 3:55 pm