Page 1 of 2
Silvertone/Talman Mashup (finished)
Posted: Sun Jul 14, 2019 10:27 am
by threewordname
Re: Silvertone/Talman Mashup
Posted: Sun Aug 25, 2019 6:05 am
by threewordname
Re: Silvertone/Talman Mashup
Posted: Sun Aug 25, 2019 7:03 am
by MechaBulletBill
Yeah, Ric swoosh hole instead of an f-hole! I really want a semi jag with one of those
Re: Silvertone/Talman Mashup
Posted: Sun Aug 25, 2019 7:36 am
by ThePearDream
I fully endorse what you're doing here. Lipsticks or gold foils would be a natural choice for this project.
I used
Krylon Glitter Blast for my plywood semi-hollow Talman. They don't have a neon green per se, but they do have a citrus green that could be nice
Re: Silvertone/Talman Mashup
Posted: Mon Aug 26, 2019 7:09 am
by Rgand
This is a cool project. I'd also suggest you look at the GFS pickups.
You can get a Surf-90 for about $35.
Re: Silvertone/Talman Mashup
Posted: Mon Aug 26, 2019 10:26 am
by MayTheFuzzBeWithYou
These are great pickups! And they also have Lipstick-Pickups...
Re: Silvertone/Talman Mashup
Posted: Sat Aug 31, 2019 11:50 am
by threewordname
taking a minute away from the body until i can get a template and template bit to do the neck pocket.
I started working on this neck that i got for free from the elementary school my brother works at. It seems one of the future world leaders broke a chunk off the headstock, and somewhere along the line one of the tuner bushings got lost, and the nut got broken into 5 pieces. Here is the before picture that i took while trying to decide on a repair shape
after this photo, i decided to sand off all of the acrylic finish, and start from raw. i thought about doing a tele shape, or mimicking a teisco shape, but in the end i decided to take the upright citizen's brigade approach and don't think.
so in the mindset of fucking winging it, i hacked a chunk off the broken part, and glued on a huge hunk of maple that i found at home depot. I literally can not stress enough how little i was thinking here.
check it out, the grain patterns and coloring aren't even close. I'm starting to think that this neck isn't even maple...
I just put my pen on the wood and somehow a cool shape came out. Nailed it.
is anyone else seeing how much I'm crushing it right now?
gratuitous mock up shot, with chunks of scrap wood representing guitar parts.
The neck has about 5 coats of danish oil on it now, and the patch is starting to blend a little more. Now i need to start picking out hardware and spending money on this thing.
Re: Silvertone/Talman Mashup
Posted: Sat Aug 31, 2019 2:26 pm
by Rgand
That thing definitely needed some help. That is a cool headstock shape.
Re: Silvertone/Talman Mashup
Posted: Tue Sep 03, 2019 3:44 am
by threewordname
I have three options for the bridge ranging from $10 to $30
Thoughts? Opinions?
Re: Silvertone/Talman Mashup
Posted: Tue Sep 03, 2019 2:00 pm
by DrQuasar
I liked where it's headed with the not-thinking-about-it too much. You should just keep going with that on all the decisions for this build, including which bridge. My knee-jerk pick is #3.
Re: Silvertone/Talman Mashup
Posted: Sat Sep 14, 2019 10:11 am
by threewordname
You're right, i knew what i wanted, but I realized i was just being cheap.
Here's a neck template that i made out of an old sheet of acrylic.
I did a first pass at 1/2 an inch, so i can measure the final depth later. Here it is next to my first talman build from a few years ago. Back then i didn't have a fancy full scale PDF to work from, so i had to just wing it even more.
with the process on hold until my bridge showed up, i decided to put down a layer of primer, and then sand halfway to forever, which means I'm only half done sanding.
Now it was about that time that i realized i was planning things again. to throw a wrench into everything I found a record that I got for free from the library at the school i work at. The sleeve was for a blues compilation, but the record inside was gospel, folk, and cajun. Fuck that. You are getting turned into a pickguard.
hey, my bridge showed up. Its starting to look like a guitar.
Re: Silvertone/Talman Mashup
Posted: Sat Sep 14, 2019 10:41 am
by MechaBulletBill
...and it just gets classier the more it comes together!
Re: Silvertone/Talman Mashup
Posted: Sat Sep 14, 2019 8:41 pm
by nikkij
beauty!
Re: Silvertone/Talman Mashup
Posted: Sun Sep 15, 2019 8:04 am
by Shadoweclipse13
I love this! White with the black and red vinyl pickguard just screams 1960's/rock and roll. Definitely watching this one.
Re: Silvertone/Talman Mashup
Posted: Mon Sep 16, 2019 9:10 am
by DrQuasar
Yeah man, this is looking nice.