new projects
- finboy
- PAT. # 2.972.923
- Posts: 1874
- Joined: Wed Jul 16, 2008 6:31 pm
- Location: Calgary, Alberta, Canada
Re: new projects
Slight aging to reflect the above guitars, I asked for a slight bit more on the forearm ledge, other than that it's getting close
- TWood
- PAT. # 2.972.923
- Posts: 321
- Joined: Mon Jul 29, 2013 9:20 am
- Location: England
Re: new projects
Really cool, I'd do the same if I could afford one :/finboy wrote:Slight aging to reflect the above guitars, I asked for a slight bit more on the forearm ledge, other than that it's getting close
Tom
- finboy
- PAT. # 2.972.923
- Posts: 1874
- Joined: Wed Jul 16, 2008 6:31 pm
- Location: Calgary, Alberta, Canada
Re: new projects
I sold my squire jag and some other bits to get the money together, I've been impressed by mjt's stuff before but always had bodies and the guitar never felt 100% because the neck didnt't match the feel of the body. This time I thought I would try all the parts together
Wear marks finished, now they are going to age/check the finish and chips and should be close to done.
Wear marks finished, now they are going to age/check the finish and chips and should be close to done.
- finboy
- PAT. # 2.972.923
- Posts: 1874
- Joined: Wed Jul 16, 2008 6:31 pm
- Location: Calgary, Alberta, Canada
Re: new projects
Thankfully this was paid before losing my job, could have made for an awkward conversation were it not, now I will have time to finesse the body when it gets in
- Fiddy
- PAT. # 2.972.923
- Posts: 12402
- Joined: Thu Nov 29, 2007 11:38 am
- Location: Canada Dry
Re: new projects
That neck looks badass.
- finboy
- PAT. # 2.972.923
- Posts: 1874
- Joined: Wed Jul 16, 2008 6:31 pm
- Location: Calgary, Alberta, Canada
Re: new projects
Some hardware shots
- HNB
- PAT. # 2.972.923
- Posts: 13565
- Joined: Tue May 10, 2011 7:55 am
- Location: Puyallup, Washington
- Contact:
Re: new projects
YAY! I kind of finally got to see how the headstock decal I did for you turned out! Looks cool!
Christopher
Lilith Guitars
Lilith Guitars
- finboy
- PAT. # 2.972.923
- Posts: 1874
- Joined: Wed Jul 16, 2008 6:31 pm
- Location: Calgary, Alberta, Canada
Re: new projects
I was hoping for a better shot but no luck' will grab you some high res ones when it gets in
Almost there, this one needs some tweaking before it's done, but it's coming together
Almost there, this one needs some tweaking before it's done, but it's coming together
- CROSS_guitars
- PAT. # 2.972.923
- Posts: 3151
- Joined: Tue Sep 09, 2008 5:52 am
- Location: Thornbury Melbourne
Re: new projects
Whoa!
- 2fLAz
- PAT. # 2.972.923
- Posts: 2780
- Joined: Tue Jan 03, 2012 7:29 am
- Location: France
Re: new projects
nicey
- finboy
- PAT. # 2.972.923
- Posts: 1874
- Joined: Wed Jul 16, 2008 6:31 pm
- Location: Calgary, Alberta, Canada
Re: new projects
Basically done, props to hnb, cooter, cross, strider13
- Zork
- PAT. # 2.972.923
- Posts: 1811
- Joined: Thu Jan 19, 2012 7:01 am
- Location: Bremen, Germany
- finboy
- PAT. # 2.972.923
- Posts: 1874
- Joined: Wed Jul 16, 2008 6:31 pm
- Location: Calgary, Alberta, Canada
Re: new projects
With a few close matches, will work on it tomorrow, so far it's in mock up mode
- finboy
- PAT. # 2.972.923
- Posts: 1874
- Joined: Wed Jul 16, 2008 6:31 pm
- Location: Calgary, Alberta, Canada
Re: new projects
Progress of the slowest kind, routs are *just* too shallow so I will have to go in and make some room, but that's a Monday problem
- hhhehehe
- PAT. # 2.972.923
- Posts: 573
- Joined: Wed Jul 17, 2013 2:03 pm
- Location: Stockholm, Sweden
Re: new projects
I love thisfinboy wrote:Progress of the slowest kind, routs are *just* too shallow so I will have to go in and make some room, but that's a Monday problem
• There are two kinds of people in this world; those who say disco is dead, and those who got ~mad moves~ •