Maverick Build / Restoration
- punkacc9
- PAT. # 2.972.923
- Posts: 1366
- Joined: Sun Jun 03, 2012 11:21 am
Maverick Build / Restoration
Yes I bought Pats Maverick body. I am going to try and make an extremely close replica. Only thing is I haven't decided if I wanna do the factory sunburst or Paint it OTM haha
The body has no excess routing or anything. It was refinished IBM. I am going to keep the finish on it for a while until I have the cash for Rhoney to paint it. Hopefully The grain is still good after the paint and it would be really cool if the original finish was still under it. If anyone has any pictures of the body before the refinish please send me them!
I will be using a very close replica of the maverick neck from Cross. It is basically an xii neck but with a shorter headstock. HNB made me made me up the logo. I just have to find a place to print it now.
You guys think I should restore the whole thing like an original Maverick or make it my own and do it in OTM like my mockup? Also, Matching headstock or not. Can't decide.
Here's a picture of the body together before Pat got the sunburst body.
Some sexy body shots.
Untitled by punkacc9, on Flickr
Untitled by punkacc9, on Flickr
Untitled by punkacc9, on Flickr
Untitled by punkacc9, on Flickr
Untitled by punkacc9, on Flickr
Untitled by punkacc9, on Flickr
Untitled by punkacc9, on Flickr
And here is my mockup
OTM Maverick blocks by punkacc9, on Flickr
The body has no excess routing or anything. It was refinished IBM. I am going to keep the finish on it for a while until I have the cash for Rhoney to paint it. Hopefully The grain is still good after the paint and it would be really cool if the original finish was still under it. If anyone has any pictures of the body before the refinish please send me them!
I will be using a very close replica of the maverick neck from Cross. It is basically an xii neck but with a shorter headstock. HNB made me made me up the logo. I just have to find a place to print it now.
You guys think I should restore the whole thing like an original Maverick or make it my own and do it in OTM like my mockup? Also, Matching headstock or not. Can't decide.
Here's a picture of the body together before Pat got the sunburst body.
Some sexy body shots.
Untitled by punkacc9, on Flickr
Untitled by punkacc9, on Flickr
Untitled by punkacc9, on Flickr
Untitled by punkacc9, on Flickr
Untitled by punkacc9, on Flickr
Untitled by punkacc9, on Flickr
Untitled by punkacc9, on Flickr
And here is my mockup
OTM Maverick blocks by punkacc9, on Flickr
Last edited by punkacc9 on Sat Oct 04, 2014 7:53 am, edited 1 time in total.
- punkacc9
- PAT. # 2.972.923
- Posts: 1366
- Joined: Sun Jun 03, 2012 11:21 am
- punkacc9
- PAT. # 2.972.923
- Posts: 1366
- Joined: Sun Jun 03, 2012 11:21 am
Re: Maverick Build
Here's a little visual explanation how they made the Maverick headstocks. They cut out that red box and then slid the top down, then veneered over it. check out that joint in the third picture.
Untitled by punkacc9, on Flickr
https://flic.kr/p/ouiE2B by punkacc9, on Flickr
Untitled by punkacc9, on Flickr
https://flic.kr/p/ouiE2B by punkacc9, on Flickr
- punkacc9
- PAT. # 2.972.923
- Posts: 1366
- Joined: Sun Jun 03, 2012 11:21 am
Re: Maverick Build
Not much of an update, but Cross got the Maverick headstock template done.
Fender Maverick Headstock by punkacc9, on Flickr
Fender Maverick Headstock by punkacc9, on Flickr
- pad
- PAT. # 2.972.923
- Posts: 1185
- Joined: Tue Dec 13, 2011 1:05 pm
- Location: Kassel, Germany.
Re: Maverick Build
im wondering if you'd get the headstock to match the body.
it shouldn't be that easy, am i right?
well and if it would be possible than id stay with it and do the matching headstock.
otherwise your a bit free to make with it what you want.
it shouldn't be that easy, am i right?
well and if it would be possible than id stay with it and do the matching headstock.
otherwise your a bit free to make with it what you want.
- chadmo1
- PAT. # 2.972.923
- Posts: 113
- Joined: Thu Jun 26, 2014 10:34 am
- Location: DC Suburbs
Re: Maverick Build
That will be awesome.
- punkacc9
- PAT. # 2.972.923
- Posts: 1366
- Joined: Sun Jun 03, 2012 11:21 am
Re: Maverick Build
I don't think I'm gonna match the headstock on it. Im going for a replica of the original. I'll probably keep the IBM though until I have the money to refinish it in a burst.
- CROSS_guitars
- PAT. # 2.972.923
- Posts: 3130
- Joined: Tue Sep 09, 2008 5:52 am
- Location: Thornbury Melbourne
- punkacc9
- PAT. # 2.972.923
- Posts: 1366
- Joined: Sun Jun 03, 2012 11:21 am
Re: Maverick Build
That grain is hot!
- CROSS_guitars
- PAT. # 2.972.923
- Posts: 3130
- Joined: Tue Sep 09, 2008 5:52 am
- Location: Thornbury Melbourne
Re: Maverick Build
My first ever block inlay!
Now 8 more to go
Now 8 more to go
- terminalvertigo
- PAT. # 2.972.923
- Posts: 3783
- Joined: Thu Dec 11, 2008 7:08 pm
- Location: Ottawa, Canada
Re: Maverick Build
punkacc9 wrote:I don't think I'm gonna match the headstock on it. Im going for a replica of the original. I'll probably keep the IBM though until I have the money to refinish it in a burst.
you don't like the IBM?
GoodDeals:Jaguar018-Skip-Scotty66-Noirengineer-Panoramic-Soundhack-Tribi9-Stereordinary-Dug-Ginnungagap-Loomer-Eupat-FenderBob-Franco-AWSchmit-PeterHerman-TweedleDee-Diceman-Prospect-Danocaster-Glimmertwin-Jetset-Staytuned-ukfuzz-Aen-Atomicmassunit-MT,etc
- punkacc9
- PAT. # 2.972.923
- Posts: 1366
- Joined: Sun Jun 03, 2012 11:21 am
Re: Maverick Build
Why am I just seeing this now?!? Amazing!CROSS_guitars wrote:My first ever block inlay!
Now 8 more to go
- punkacc9
- PAT. # 2.972.923
- Posts: 1366
- Joined: Sun Jun 03, 2012 11:21 am
Re: Maverick Build
terminalvertigo wrote:punkacc9 wrote:I don't think I'm gonna match the headstock on it. Im going for a replica of the original. I'll probably keep the IBM though until I have the money to refinish it in a burst.
you don't like the IBM?
It's ok but not professional. I think I'm gonna just completely restore it to stock. I might keep it IBM for a while though to save some cash.
- terminalvertigo
- PAT. # 2.972.923
- Posts: 3783
- Joined: Thu Dec 11, 2008 7:08 pm
- Location: Ottawa, Canada
Re: Maverick Build
punkacc9 wrote:terminalvertigo wrote:punkacc9 wrote:I don't think I'm gonna match the headstock on it. Im going for a replica of the original. I'll probably keep the IBM though until I have the money to refinish it in a burst.
you don't like the IBM?
It's ok but not professional. I think I'm gonna just completely restore it to stock. I might keep it IBM for a while though to save some cash.
GoodDeals:Jaguar018-Skip-Scotty66-Noirengineer-Panoramic-Soundhack-Tribi9-Stereordinary-Dug-Ginnungagap-Loomer-Eupat-FenderBob-Franco-AWSchmit-PeterHerman-TweedleDee-Diceman-Prospect-Danocaster-Glimmertwin-Jetset-Staytuned-ukfuzz-Aen-Atomicmassunit-MT,etc
- CROSS_guitars
- PAT. # 2.972.923
- Posts: 3130
- Joined: Tue Sep 09, 2008 5:52 am
- Location: Thornbury Melbourne