Any updates to the Bass VI parts list?
- dinosaur
- PAT. # 2.972.923
- Posts: 533
- Joined: Thu Oct 12, 2006 5:50 am
- Location: California
Any updates to the Bass VI parts list?
I'm seriously considering putting together a USACG Bass VI over the next few months, as I still have some spare time. The list that is stickied here is great, but I know it's a year or two old and I'm wondering if anyone has recently found any other source of parts. For example, I wonder if a Fender dealer can now order a 4 switch plate from the custom shop?
- davelowell
- PAT. # 2.972.923
- Posts: 209
- Joined: Mon Oct 02, 2006 11:54 am
- Location: StL
Re: Any updates to the Bass VI parts list?
I don't know about the 4 switch plate, but I recently did this project and the list is very good. I didn't have any problems locating anything except the wide bridge base. I used a jazz with mustang saddles and bent down the edge opposite the screws because I want to tune down to Eb.
Good luck!
Dave
Good luck!
Dave
- dinosaur
- PAT. # 2.972.923
- Posts: 533
- Joined: Thu Oct 12, 2006 5:50 am
- Location: California
Re: Any updates to the Bass VI parts list?
Thanks. Can I ask what you used for the control plate?
- davelowell
- PAT. # 2.972.923
- Posts: 209
- Joined: Mon Oct 02, 2006 11:54 am
- Location: StL
Re: Any updates to the Bass VI parts list?
I got a tracing from Alfred, then sent it to a company in CA. They made one out of brushed aluminum. It looks ok, not great, but functional. I am holding out in hopes of Alfred getting some more made along with the wide bridge base. Until then, should work. I have a copy of the tracing, also, if you need one.
My bass vi is not ready though. It's colored and clear coated, so I guess assembly and setup is all I am waiting on at this point.
Dave
My bass vi is not ready though. It's colored and clear coated, so I guess assembly and setup is all I am waiting on at this point.
Dave