HSS Warmoth Jaguar Project, pickup question

Talk about modding or building your own guitar from scratch.
Post Reply
User avatar
Georg Figél
PAT PEND
PAT PEND
Posts: 16
Joined: Tue Jun 18, 2019 1:34 pm

HSS Warmoth Jaguar Project, pickup question

Post by Georg Figél » Sat Jul 13, 2019 5:07 am

Hello Everyone,

before I start my Jaguar project, I'd like to get some opinions regarding getting Stratocaster HSS pickups for it, as opposed to Jaguar pickups.

In general, I really like the look of the Jaguar, but tone wise I'd like to get a modern rock tone in the bridge, a chimey bell like neck tone and funky quack tones like a Strat in positions 2 and 4.
Of course, the Jaguar's bridge and scale length will make it sound different than a Strat, but I'm not expecting "authentic" results, rather that it'll be it's own special creation.

I'm planning to get the following pickups:
Seymour Duncan '59/Custom Hybrid in the bridge
Bareknuckle Irish Tour Middle and Neck pickups

Also, I want to mount the neck pickup closer to the neck than on a normal Jaguar for more warmth.

Here are some specs of the parts that I already have:
Roasted maple neck
Roasted swamp ash body
Height adjustable saddles mustang bridge: https://www.warmoth.com/Modified-Mustan ... 6C716.aspx
Otherwise, the usual Jaguar stuff


Edit: I now realized that there is a "Jaguarillo".
But please share your experiences in terms of pickups, thank you
My fancy guitar videos on YT:
https://www.youtube.com/c/GeorgFigél
Leave a Like on Facebook:
https://www.facebook.com/georgFigel

User avatar
Embenny
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 10363
Joined: Tue May 24, 2016 5:07 am

Re: HSS Warmoth Jaguar Project, pickup question

Post by Embenny » Sat Jul 13, 2019 4:56 pm

I have a jaguarillo and a three-pickup Mustang so I have experience with 3-pickup shortscales. Your build sounds nice. It sounds like a Jaguarillo with the usual Jag plates added on, and presumably non-slanted pickups.

24" guitars already sound warmer than 25.5" ones but if you want to move the neck pickup farther from the bridge, there's nothing wrong with that.

Pickups are a totally personal thing. One thing that I will say is that whatever pickup you choose will sound warmer in this than in a strat, so be aware of that.

Also, I strongly recommend a series/parallel or coil split switch for the bridge humbucker, so that you can get more quack from the bridge&middle combo. Coil split can give you a noiseless combo with the middle pickup but parallel is the more useful tone on its own IMO.
The artist formerly known as mbene085.

User avatar
Georg Figél
PAT PEND
PAT PEND
Posts: 16
Joined: Tue Jun 18, 2019 1:34 pm

Re: HSS Warmoth Jaguar Project, pickup question

Post by Georg Figél » Sun Jul 14, 2019 2:59 am

thank you for the tips :)
Ok, so it'd be best to choose clear sounding pickups then.
yes, the pickups will be non slanted.

I will definitely do the coil split option.

I'll probably put a 5 way switch in the lower control plate and 3 toggles on the upper horn
there will be a "single coil mode" for the humbucker
A "middle and neck in series" switch, to emulate a jazzy neck humbucker
An "add the neck pickup in parallel" switch

I'll probably test some of these options out first before soldering them in properly though ;)
My fancy guitar videos on YT:
https://www.youtube.com/c/GeorgFigél
Leave a Like on Facebook:
https://www.facebook.com/georgFigel

Post Reply