Mosrite Bass - Possible Resto

Bringing your older offset back to life.
User avatar
funsize
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 177
Joined: Sun Mar 18, 2012 4:19 pm

Mosrite Bass - Possible Resto

Post by funsize » Sun Apr 08, 2012 7:46 pm

I've had this old Mosrite bass of my dad's for years and I always thought it was great looking but it's never played well. The pots are corroded and every note produces a pretty gnarly hiss. Cosmetically it's not in very good shape either. Anyway, I'd like to know if anyone could shed some light on this particular guitar (year, model, etc.), and has anyone restored one of these before. I did a little research on Mosrite basses, but never saw one this combo of pickguard/body color.

Image

Image

Image

Image
I doubt this is a serial number but I dunno what it could be. I didn't bother taking the neck off when taking these pics so I don't know if there is any dating info on the heel or in the pocket.

Image

anyway I didn't research this all that well, just thought I'd get some opinions and see if anyone had experience with Mosrite.

User avatar
weed_killer
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 2472
Joined: Mon Apr 13, 2009 6:23 am

Re: Mosrite Bass - Possible Resto

Post by weed_killer » Mon Apr 09, 2012 7:36 am

it's a refinish. I don't think I've ever seen one with a tort pickguard, but I'm not very knowledgeable about them. I think that the 'Ventures' models were made until the mid 60s when the contract/
agreement expired.

User avatar
Gonkulator
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 2948
Joined: Mon Feb 28, 2011 10:31 am
Location: Massachusetts

Re: Mosrite Bass - Possible Resto

Post by Gonkulator » Mon Apr 09, 2012 8:40 am

Definitely from the early-mid 60's. It is a refin, the original color was probably white since it has a tort guard but you can never be sure considering you could order everything custom from Mosrite.

The numbers stamped at the bottom of the neck on the fretboard is the serial number, that's how they did it.

Fun guitars with fast necks, I honestly would just get some new pots in there and leave it be. You can always find plenty of replacement parts on eBay.

User avatar
ludobag1
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 2543
Joined: Sun Nov 23, 2008 4:28 pm
Location: france

Re: Mosrite Bass - Possible Resto

Post by ludobag1 » Mon Apr 09, 2012 2:10 pm

go to the mosrite forum you will have lot of information on this bass ;)
really cool :?

User avatar
pacemaker
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 2860
Joined: Sat May 29, 2010 6:44 am
Location: Atlanta, Georgia
Contact:

Re: Mosrite Bass - Possible Resto

Post by pacemaker » Mon Apr 09, 2012 6:39 pm

666...6??? :o

secndshft

Re: Mosrite Bass - Possible Resto

Post by secndshft » Mon Apr 09, 2012 6:45 pm

Craig Gates wrote:666...6???
DEVIL TONZZZZZZ >:(

User avatar
Filly-Fuzz
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1236
Joined: Sat Aug 13, 2011 10:04 pm
Location: On the edge of the World

Re: Mosrite Bass - Possible Resto

Post by Filly-Fuzz » Mon Apr 09, 2012 7:27 pm

That thing is badass!

I for one would love to see it in it's white and tort glory, and that serial number is amazing.
Try contacting Semi's daughter (I think she now runs Mosrite) or drop a line at Tym's Guitars if your in Oz. They should be able to tell something about it, but to me that serial number might mean it could be quite special or it might be just a happy accident.
I tell you all my secrets but I lie about my past....

User avatar
pacemaker
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 2860
Joined: Sat May 29, 2010 6:44 am
Location: Atlanta, Georgia
Contact:

Re: Mosrite Bass - Possible Resto

Post by pacemaker » Mon Apr 09, 2012 7:36 pm

Filly-Fuzz wrote:That thing is badass!

I for one would love to see it in it's white and tort glory
I agree on both counts.

User avatar
codog
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 82
Joined: Tue Jul 14, 2009 7:02 pm

Re: Mosrite Bass - Possible Resto

Post by codog » Mon Apr 09, 2012 7:48 pm

Its a really nice bass, I'm somewhat familiar with mostrites. There are a bunch of websites dedicated to specific model mostrites where you could get info, or do what I do, go on ebay check out a bunch of pictures of ones on there and see if yours matches any. Its a great looking bass, I would honestly restore the whole thing. Its been refinished anyways, and its always cool bring an old instrument back to its hayday. I'd get it check out to see if they can savage any of the pots, you probably what to stick with period correct parts if possible, also if you don't just make sure you store all the original stuff safety somewhere. Best of luck!

User avatar
Louie7
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 116
Joined: Fri Mar 30, 2012 2:51 pm
Location: In a hidden location atop a distant sand-dune

Re: Mosrite Bass - Possible Resto

Post by Louie7 » Mon Apr 09, 2012 7:48 pm

I have a Ventures Mosrite Bass. Single Pickup version; Candy Apple Red. Same era, though.

I like yours alot. If it was mine, I'd set it up correctly with new flatwounds and clean up the electronics.

Does yours have the original case? Mine does. They have value too, ya know.

User avatar
funsize
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 177
Joined: Sun Mar 18, 2012 4:19 pm

Re: Mosrite Bass - Possible Resto

Post by funsize » Mon Apr 09, 2012 8:21 pm

it does have a case that fits it perfectly, though it's in worse shape than the guitar itself. Can't say for sure if its original though. I'll try and post some pics later.

I'd love to get it refinished to the original white. The only reason I didn't think that the serial number was a serial number was that it was 6666. Pretty weird.

If nothing else I'm gonna replace the pots and see what I can do about getting the body refinished. It really does have some pretty nasty gouges I didn't detail in the photos though. Thanks for the responses.

User avatar
countertext
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 4142
Joined: Wed Sep 28, 2011 6:25 pm
Location: Tacoma

Re: Mosrite Bass - Possible Resto

Post by countertext » Mon Apr 09, 2012 8:36 pm

Just don't ever doubt how cool that bass is. It is awesome. I agree with the other folks about how sweet it would be in white, but be patient and find a solid and reputable refinisher so you can get it right the first time!

User avatar
Louie7
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 116
Joined: Fri Mar 30, 2012 2:51 pm
Location: In a hidden location atop a distant sand-dune

Re: Mosrite Bass - Possible Resto

Post by Louie7 » Wed Apr 11, 2012 7:17 pm

funsize wrote:it does have a case that fits it perfectly, though it's in worse shape than the guitar itself. Can't say for sure if its original though. I'll try and post some pics later.

I'd love to get it refinished to the original white. The only reason I didn't think that the serial number was a serial number was that it was 6666. Pretty weird.

If nothing else I'm gonna replace the pots and see what I can do about getting the body refinished. It really does have some pretty nasty gouges I didn't detail in the photos though. Thanks for the responses.

I'd be careful about replacing the pots. In all likelyhood, the pots themselves are OK, and it's a wiring issue, such as grounding, cold solder joints or misplaced connections. Original pots are valuable and are a major contributor to a vintage instruments worth.

btw....what is it with Mosrite cases..?...they seem to disintegrate faster than other brands.

Is yours really a Mosrite case? Mid 60's Mosrite cases are usually a sort of brownish fake-alligator, but otherwise are assembled pretty much like Fender cases of the same era. I have two... both are fuzzy orange inside with a narrow rectangular lidded compartment in the lower left corner.

User avatar
funsize
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 177
Joined: Sun Mar 18, 2012 4:19 pm

Re: Mosrite Bass - Possible Resto

Post by funsize » Thu Apr 12, 2012 10:39 am

yeah the case sounds exactly the same.

When I checked the wiring everything looked good including the ground. The pots, however, were really corroded. It's possible i guess that I could just clean all the oxidation or whatever is on them off and see if that get's rid of the noise. Any leads on what I might use? It appears to be pretty caked on.

User avatar
Fiddy
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 12391
Joined: Thu Nov 29, 2007 11:38 am
Location: Canada Dry

Re: Mosrite Bass - Possible Resto

Post by Fiddy » Thu Apr 12, 2012 4:44 pm

Clean the pots with contact cleaner/lubricant spray. Make sure it has lub in it tho'. Nice bass btw. I'm a big fan of Mosrite guitars... (Well, not a fanboy but I like them a lot)

Post Reply