OffsetGuitars.com

Larsongs wrote: ↑

Wed Oct 07, 2020 9:12 pm

Did you get a 2nd AC15 or Speaker Cab? Either way very cool! I know what you mean, I love my Vox Amps..

A second ac15, using my dd-7 and running them in stereo.

SY6655321 wrote: ↑

Thu Oct 08, 2020 7:18 pm

Larsongs wrote: ↑

Wed Oct 07, 2020 9:12 pm

Did you get a 2nd AC15 or Speaker Cab? Either way very cool! I know what you mean, I love my Vox Amps..

A second ac15, using my dd-7 and running them in stereo.

How do you adjust the lower Amp? All the Controls are on top..

I use a Keeley 30 MS Double Tracker Pedal & run my AC15 & 65 DRRI Stereo.. DRRI on the bottom as the Controls are on the front of the Amp... I have thought about a 2 X 12 Vox Cabinet with Celestion Alnico Blues. But, I'd like to have the AC15 Alnico Blue live as well to run Stereo.... Although I have thought about a second AC15 with Blue too...

I also do the same thing with Modded AC10 & 65 PRRI Amps... Fender & Vox make a great Sound together...

The control panel is recessed enough that you can mess with the knobs easily, even with another amp on top. The chicken head pointer knobs kinda help with seeing your settings. I play both my amps on the same settings, so it's not a big deal. I just find a good volume on the lower amp and then match the top amp to it.

How's the Keeley 30 MS Double Tracker? I'm using my Boss DD-7 on the 50ms mode to try and get that stereo double tracked sound.

SY6655321 wrote: ↑

Thu Oct 08, 2020 10:34 pm

The control panel is recessed enough that you can mess with the knobs easily, even with another amp on top. The chicken head pointer knobs kinda help with seeing your settings. I play both my amps on the same settings, so it's not a big deal. I just find a good volume on the lower amp and then match the top amp to it.

How's the Keeley 30 MS Double Tracker? I'm using my Boss DD-7 on the 50ms mode to try and get that stereo double tracked sound.

I have the Keeley 30 MS Double Tracker Pedal on my Boss BCB60 Pedal Board.. It can be used Mono with one Amp or Stereo with 2 Amps.. The Abbey Mode nails the Abbey Road Double Track Sound. Extremely versatile..

Check out this demo...

https://youtu.be/-3jTSw0grXg

The power amp is where the good VOX tone lies for me. Turn the master all the way up, and use the Top Boost channel volume to dial in the actual volume for a nice compressed clean tone.

Great Yawn wrote: ↑

Thu Oct 22, 2020 5:06 am

The power amp is where the good VOX tone lies for me. Turn the master all the way up, and use the Top Boost channel volume to dial in the actual volume for a nice compressed clean tone.

IMO, this is what makes my AC4HW so gooood!

Probably not the Voxes you guys are talking about, but I found a VX2 for sale right here in Ohio and it shipped the next day. I love the sounds of the VX1 but wanted something a little louder that I could actually use at practice or maybe even an outdoor gig (whenever those happen again). The VX2 certainly fit the bill. Oddly enough I like all of the non-Vox modeling settings on it the most, especially the Brit 800. Got some seriously chunky AC/DC action on that one.

Oh man, Voxes are so great. I found an AC15 for $350 (!), but I don't have that kinda money rn :/

I got a Vox Pathfinder 15 that I had a lot o fun modding.

Bolted a second cab to it..
Added tremolo speed cap mod
Headroom mod
Blues Junior Reverb Tank Mod

Jensen Alnico 8" Speaker and a Celestion Ceramic 8" Speaker Both 4 Ohm.

Thinking about moving it on and getting a AC4 though.

I have the older Vox ADVT (Valvetronix) series Amps they are some of the very best with out any doubt

I have a lot of great amps, but this one is probably my favorite. Vox AC30 TBX.

Tons of love for Vox circuits, but my love for the amps themselves depends on the specific model, era, etc. Built several takes, myself:

Half-power AC30TB circuit with no vibrato and added mid control:






AC30TB Brite Channel w/ tone-selectable EF86 Normal Channel (a la AC15 or Matchless) and no Vibrato:

Edcor iron is cool. I got a set of xformers on my spare parts bin. They will eventually become part of an amp..

tribi9 wrote: ↑

Wed Jan 13, 2021 8:19 am

Edcor iron is cool. I got a set of xformers on my spare parts bin. They will eventually become part of an amp..

Yep, it's great, economical, and available in a metric shit-ton of specs. I wish it was a little quicker to deliver but what can you do.

Dr Tony Balls wrote: ↑

Wed Jan 13, 2021 8:31 am

I like the white cliffs. Nice work too btw.