Picked this up locally for short money, already cleaned the case and ordered new caps.
I really like 2x10 amps, this should be a fun project.
It has Eminence speakers dated 1975 and the tone circuits have been modified already, we shall see what it sounds like after new caps.
NAD: Epiphone Ensign 1966
- Scout
- PAT. # 2.972.923
- Posts: 962
- Joined: Thu Feb 27, 2020 3:26 pm
- Location: Phillyish
- 46346
- PAT. # 2.972.923
- Posts: 2832
- Joined: Sun Feb 27, 2011 1:39 am
- Location: echo ECHO park PARK
- Contact:
Re: NAD: Epiphone Ensign 1966
very cool! i'm surprised i don't recognize this one. but i really like that format, too, and
this looks like it has all the potential for goodness. do you have a schematic?
this looks like it has all the potential for goodness. do you have a schematic?
Cat Museum, ACME, Malcolm Mooney, Dream Apes, The Cooling Time, Kind Hearts and Coronets, Quarks
- Surfysonic
- PAT. # 2.972.923
- Posts: 1868
- Joined: Sat Dec 04, 2010 12:22 pm
- Location: Walkersville, MD
- Contact:
Re: NAD: Epiphone Ensign 1966
Very cool, Scout! Congrats & enjoy!!
The doofus formerly known as Snorre...
- Scout
- PAT. # 2.972.923
- Posts: 962
- Joined: Thu Feb 27, 2020 3:26 pm
- Location: Phillyish
Re: NAD: Epiphone Ensign 1966
This layout is the same , supposedly, as the Gibson Saturn GA 45 RVT. It's had some work done already , I'm sure decades ago , and it's a bit unorganized the way it was put together. The difference between a ' 60 ' s Fender and a Gibson/Epiphone is apparent in the wire routing and dressing and the ease of servicing, I'm taking this apart where I have to clean up some funkiness starting with the fused neutral and floating filter caps.
Thanks Surfy, I have a regular House of Misfit Amps. Gibson scout, Magnatone/Estey 413, Ampeg M-15 , Ampeg Reverbojet, Danelectro Cadet,
Ampeg VT 60, JC 55 , Kay 700, 5E3 clone, Alessandro Vibrolux clone and a Vox or two. The Fenders all went down the road mostly because they're the easiest to sell when things get tight. Plus I like weird shit.
Thanks Surfy, I have a regular House of Misfit Amps. Gibson scout, Magnatone/Estey 413, Ampeg M-15 , Ampeg Reverbojet, Danelectro Cadet,
Ampeg VT 60, JC 55 , Kay 700, 5E3 clone, Alessandro Vibrolux clone and a Vox or two. The Fenders all went down the road mostly because they're the easiest to sell when things get tight. Plus I like weird shit.
Last edited by Scout on Mon Sep 04, 2023 6:09 pm, edited 1 time in total.
- MattK
- PAT. # 2.972.923
- Posts: 3633
- Joined: Sun Aug 10, 2008 9:51 pm
- Location: Hobart, Australia
Re: NAD: Epiphone Ensign 1966
oh that is NICE, great get!
- Scout
- PAT. # 2.972.923
- Posts: 962
- Joined: Thu Feb 27, 2020 3:26 pm
- Location: Phillyish
Re: NAD: Epiphone Ensign 1966
Replaced the filter caps after installing some terminal strips, not much room available so I had to stack them.
It has a 4 position power switch, off, standby, on, reverse on. I kept the switch, rewired the neutral so it’s not fused and eliminated the standby . It’s still a mess but I’ll power it up and see how noisy it is before I rewire any more.
I find it very relaxing, of course I can take my time so that makes it low stress.
It has a 4 position power switch, off, standby, on, reverse on. I kept the switch, rewired the neutral so it’s not fused and eliminated the standby . It’s still a mess but I’ll power it up and see how noisy it is before I rewire any more.
I find it very relaxing, of course I can take my time so that makes it low stress.