How do I make a cable.....
- zhivago
- Mods
- Posts: 21981
- Joined: Tue Sep 12, 2006 6:18 am
- Location: London, UK
How do I make a cable.....
...to go from my amp's output (1/4 jack) onto the 10" speakers?
just wanna know for sure what to buy (and where from) so I can give it to my cousin and he can wire things up for me.
many thanks
closeup of speaker ends for reference....
just wanna know for sure what to buy (and where from) so I can give it to my cousin and he can wire things up for me.
many thanks
closeup of speaker ends for reference....
Resident Spartan.
Re: How do I make a cable.....
You need -
1 x 1/4" Right angle Jack - Maplins part I/D KQ33L
4 x Lucar Spade connectors (female) - Maplins part I/D - JH88V
The speakers need wiring in parallel (assuming you are using the 8-Ohm speakers in the picture).
This means -
I hope this helps
1 x 1/4" Right angle Jack - Maplins part I/D KQ33L
4 x Lucar Spade connectors (female) - Maplins part I/D - JH88V
The speakers need wiring in parallel (assuming you are using the 8-Ohm speakers in the picture).
This means -
I hope this helps
- Jez
- PAT PEND
- Posts: 38
- Joined: Mon Oct 09, 2006 4:05 am
- Location: Canterbury, UK
Re: How do I make a cable.....
Yeah, that's right. It is really easy... Even I could do it!
Must say, I am very impressed about how patient you're being!
Must say, I am very impressed about how patient you're being!
anyone can play guitar
- zhivago
- Mods
- Posts: 21981
- Joined: Tue Sep 12, 2006 6:18 am
- Location: London, UK
Re: How do I make a cable.....
wow!
thanks for the diagram!!
I'll get down to ordering the parts tomorrow.
I have been super-patient with this amp, yeah...I have to admit though, that I've been itching a lot lately to fire it up...
thanks for the diagram!!
I'll get down to ordering the parts tomorrow.
I have been super-patient with this amp, yeah...I have to admit though, that I've been itching a lot lately to fire it up...
Resident Spartan.
- zhivago
- Mods
- Posts: 21981
- Joined: Tue Sep 12, 2006 6:18 am
- Location: London, UK
Re: How do I make a cable.....
my order has been placed!!
what kind of cable should I use?
my cousin wires up car stereo systems, so could I use the wire he uses?
what kind of cable should I use?
my cousin wires up car stereo systems, so could I use the wire he uses?
Resident Spartan.
- mezcalhead
- Admin
- Posts: 11566
- Joined: Tue Sep 12, 2006 4:18 am
- Location: Swampland
Re: How do I make a cable.....
Hmm, I doubt it, unless he's wiring up some pretty heavy duty stereos. Remember it's carrying ~35W of power to the speaker .. anything small (like guitar cord) will not cope. He should know what wattage his cord is rated for though.
Distance-crunching honcho with echo unit.
- zhivago
- Mods
- Posts: 21981
- Joined: Tue Sep 12, 2006 6:18 am
- Location: London, UK
Re: How do I make a cable.....
mezcalhead wrote: Hmm, I doubt it, unless he's wiring up some pretty heavy duty stereos. Remember it's carrying ~35W of power to the speaker .. anything small (like guitar cord) will not cope. He should know what wattage his cord is rated for though.
ahhh...ok...so I need to buy some cable too...can I buy online, or should I go to a guitar shop?
Resident Spartan.
- Jay
- Admin
- Posts: 7718
- Joined: Mon Sep 11, 2006 5:01 pm
- Location: Santa Ana, CA
- Contact:
Re: How do I make a cable.....
You could buy an ordinary speaker cable and just cut the 1/4" jack off one side. Cut another chunk of it off and just pull out the wire to use for the runs between the speakers. Or if you don't mind waiting for some mail I can send you some very good quality speaker cable wire as well.
- Jez
- PAT PEND
- Posts: 38
- Joined: Mon Oct 09, 2006 4:05 am
- Location: Canterbury, UK
Re: How do I make a cable.....
I was advised by a couple of trustworthy people off HCFX that you can just go to B&Q and buy ordinary 2-core mains power cable and that would do the job fine. I think it was Dot-Dot-Dot and Cruachan who told me that, so both pretty trustworthy guys. Anyway, I tried it and it seems to work OK. I use the cable for our band PA sometimes.
That works well too, I've done that.You could buy an ordinary speaker cable and just cut the 1/4" jack off one side. Cut another chunk of it off and just pull out the wire to use for the runs between the speakers.
anyone can play guitar
- zhivago
- Mods
- Posts: 21981
- Joined: Tue Sep 12, 2006 6:18 am
- Location: London, UK
Re: How do I make a cable.....
hey J!Jay wrote: You could buy an ordinary speaker cable and just cut the 1/4" jack off one side. Cut another chunk of it off and just pull out the wire to use for the runs between the speakers. Or if you don't mind waiting for some mail I can send you some very good quality speaker cable wire as well.
that's a great idea...damn...I'm so dumb...I never thought of that!!
-----
Jez, thanks for the tip, man
the Tremolux shall be switched on soon...goddamn it...I expect it to be within the next few days...I changed strings on the '61 in anticipation...I'm gonna blow the walls down!!
Resident Spartan.
- zhivago
- Mods
- Posts: 21981
- Joined: Tue Sep 12, 2006 6:18 am
- Location: London, UK
Re: How do I make a cable.....
The Tremolux is working!!!
my cousin fixed it up last night...I wasn't able to turn it up loud, but it works!
I got loads of work on this weekend, but hopefuly I can play a bit later tonight!
thank you to everyone who helped out!!!
if I were on the FDP still, I'd say I'm in Blackface Heaven!
my cousin fixed it up last night...I wasn't able to turn it up loud, but it works!
I got loads of work on this weekend, but hopefuly I can play a bit later tonight!
thank you to everyone who helped out!!!
if I were on the FDP still, I'd say I'm in Blackface Heaven!
Resident Spartan.
- zhivago
- Mods
- Posts: 21981
- Joined: Tue Sep 12, 2006 6:18 am
- Location: London, UK
- Orang Goreng
- Mods
- Posts: 15876
- Joined: Tue Sep 12, 2006 5:56 am
- Location: Amsterdam, NL - €
- Contact:
Re: How do I make a cable.....
Great news! So how long did this project take you in total?
In the land of the blind, the one-eyed man's a freak.
- mezcalhead
- Admin
- Posts: 11566
- Joined: Tue Sep 12, 2006 4:18 am
- Location: Swampland
Re: How do I make a cable.....
The more I see of that, the more I like it .. it's like a little Vibrolux .. slightly heftier than a non-reverb Deluxe.
Distance-crunching honcho with echo unit.
- zhivago
- Mods
- Posts: 21981
- Joined: Tue Sep 12, 2006 6:18 am
- Location: London, UK
Re: How do I make a cable.....
in total...hmmm...months I guess...4-5 months...it was due to lack of money though...if I had all the cash together then it would of been under a month...the cab took 3 weeks to be made and get here...that was the most time-consuming thingOrang Goreng wrote: Great news! So how long did this project take you in total?
it sounds really nice...I cranked it to 5 and the windows rattled
it's flight case is on it's way too...then I can use it at rehearsals and gigs
Resident Spartan.