Mustang competition project
- Darknus96
- PAT PEND
- Posts: 2
- Joined: Tue Sep 20, 2022 11:01 am
Mustang competition project
Hi guys, i'm starting a vintage competition mustang project, but i have some issues, i would need some measurements for the forearm cut and the stripes, if someone can help me, i couldn't find a lot of information, and another thing: can i install a fender mustang bridge on a 9.5'' radius neck? Or i will get problems? I know it's for the 7.25". Thank you guys, sorry for my english, it's not my mothertongue, have a good day all!
- JSett
- PAT. # 2.972.923
- Posts: 8868
- Joined: Mon Jun 01, 2009 1:33 pm
- Location: Old Hampshire, Old England
Re: Mustang competition project
You can get a 9.5" Staytrem bridge that will look correct and be the right radius
Silly Rabbit, don't you know scooped mids are for kids?
- aelling
- PAT PEND
- Posts: 8
- Joined: Sat Sep 03, 2022 6:18 pm
Re: Mustang competition project
You can also get a Genuine Fender American Professional Jaguar/Jazzmaster bridge that has 9.5" radius. Fender part# 770-9942-049.
- Amon 7.L
- PAT. # 2.972.923
- Posts: 743
- Joined: Sun Aug 28, 2011 5:45 am
Re: Mustang competition project
Hello and welcome onboard,Darknus96 wrote: ↑Thu Sep 29, 2022 3:10 amHi guys, i'm starting a vintage competition mustang project, but i have some issues, i would need some measurements for the forearm cut and the stripes, if someone can help me, i couldn't find a lot of information, and another thing: can i install a fender mustang bridge on a 9.5'' radius neck? Or i will get problems? I know it's for the 7.25". Thank you guys, sorry for my english, it's not my mothertongue, have a good day all!
this video is quite useful with both measurements & placement of the stripes:
https://www.youtube.com/watch?v=B65PH-Y9dUk
Are you refinishing a vintage one or is a scratch build?