1966 Jazzmaster Restoration

Bringing your older offset back to life.
User avatar
maximee
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 926
Joined: Mon Mar 05, 2012 2:07 pm
Location: Germany

Re: 1966 Jazzmaster Restoration

Post by maximee » Fri Jan 22, 2021 8:32 am

Hey all, just a quick little sign of life. I wasn't eaten by sharks, the project is still happening, all is well.
Many thanks for your attention, all your comments are much appreciated :)

Thing is, the real world & life with a young kid plus the current COVID thing (and a gazillion other cool projects) have my attention, so there hasn't been much progress. The other week I was able to work on the electronics, and I did some pretty wild MacGyver style DIY pickup winding - you'll love it when you'll get to see it. I will share some more cool progress soon, but give me time - I'm on it.

Until then, I hope all of you are well in these weird times. Peace :-*

User avatar
Norrin Radd
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 319
Joined: Thu Jun 20, 2019 7:55 am

Re: 1966 Jazzmaster Restoration

Post by Norrin Radd » Sat Jan 23, 2021 5:18 am

Cool project! I’m glad you checked on so I can follow this restoration. Nice job especially on those pickup covers. The hours of sanding... :derp:

User avatar
Nord
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 136
Joined: Wed Feb 13, 2008 8:37 pm
Location: Vermont
Contact:

Re: 1966 Jazzmaster Restoration

Post by Nord » Sun Mar 28, 2021 5:15 am

Curious to hear if there are any updates coming soon!

User avatar
maximee
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 926
Joined: Mon Mar 05, 2012 2:07 pm
Location: Germany

Re: 1966 Jazzmaster Restoration

Post by maximee » Sun Mar 28, 2021 5:16 am

Still super busy, but it's on the list. The weather is getting better, so I'm getting ready to spray some lacquer soon. It will be happening!

User avatar
Nord
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 136
Joined: Wed Feb 13, 2008 8:37 pm
Location: Vermont
Contact:

Re: 1966 Jazzmaster Restoration

Post by Nord » Sun Mar 28, 2021 5:30 am

Awesome, thanks for the update!

User avatar
ejendres
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 76
Joined: Tue Mar 10, 2009 8:14 am

Re: 1966 Jazzmaster Restoration

Post by ejendres » Wed Apr 07, 2021 10:37 am

Amazing work man. Can't wait to see it finished.

For the pickguard if the screws are enough to hold it together I would just leave it unglued.

User avatar
maximee
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 926
Joined: Mon Mar 05, 2012 2:07 pm
Location: Germany

Re: 1966 Jazzmaster Restoration

Post by maximee » Fri Apr 16, 2021 4:33 am

Hey all, I finally found some time to share some progress. Thanks for sticking around!

I've been entangled in other cool projects, namely a few very cool Höfner restorations. I also snagged a pretty beat up collection of parts that once resembled a 1960 Supro Dual Tone that will be featured when I do the spray painting. While I was working on the Höfners I had to come up with a solution to the ever-broken Höfner pickups. Meet my super trashy pickup winder! I winged it with whatever parts I had around. Wouldn't use that rig commercially, but it works.

Image

This also had me realizing that I never actually checked if the 1966 JM pickups actually worked.
Image

Of course, they didn't. Neck and bridge both measured open circuit and on one I could already see the wire unwinding. Not good.
Image

Image

On the block:
Image

To my amazement I was able to restore both pickups by only removing about 20-30 turns on the windings where I found the break in the coil. This is super cool, because that leaves me with original pickups with virtually unchanged tone, 30 windings on a few thousand can't be heard. They measure around 7.4k which is good.
Image


For years I've had a broken 1964 Jaguar pickup that I was reluctant to have rewound. Usually it's either a normal rewind with new wire or a super expensive restoration. Since I was having so much luck and now also gathered some experience I had a go at the Jag pickup, too. Here, you can see the break in the wire and some nasty green oxide.
Image

No bueno:
Image

Aaaaand....tadaa!
Image



All in all, saving three vintage pickups in one afternoon, I considered that a happy day.
Next up: spraying some nitro!
Last edited by maximee on Thu May 13, 2021 7:39 am, edited 1 time in total.

User avatar
smjenkins
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1547
Joined: Fri Oct 08, 2010 5:45 am
Location: The Emerald Fucking City

Re: 1966 Jazzmaster Restoration

Post by smjenkins » Fri Apr 16, 2021 5:04 am

Awesome update and awesome progress! So cool to see you save three golden era pickups.

User avatar
Nord
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 136
Joined: Wed Feb 13, 2008 8:37 pm
Location: Vermont
Contact:

Re: 1966 Jazzmaster Restoration

Post by Nord » Fri Apr 16, 2021 5:20 am

Impressive pickup saves! Love the ingenuity, that winder is a winner!

User avatar
greens
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 74
Joined: Wed Feb 12, 2020 10:59 am

Re: 1966 Jazzmaster Restoration

Post by greens » Fri Apr 16, 2021 5:43 am

Great work!

Not to derail the thread, but I was wondering - had the break been many windings in, is it possible to rejoin the wire somehow (solder or something) and reuse it?

User avatar
maximee
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 926
Joined: Mon Mar 05, 2012 2:07 pm
Location: Germany

Re: 1966 Jazzmaster Restoration

Post by maximee » Fri Apr 16, 2021 5:59 am

greens wrote:
Fri Apr 16, 2021 5:43 am
Not to derail the thread, but I was wondering - had the break been many windings in, is it possible to rejoin the wire somehow (solder or something) and reuse it?
While it is possible to carefully solder the wire together the problem is that you’d have to insulate the wiring again so it doesn’t short out to adjacent windings. I’ve done that when I rewound the Höfner pickup, but it wasn’t fun. That wire is much thinner than Fender wire and breaks easily. All in all, there’s nothing magic about old wire. In your case I’d rather rewind the pickup.

The thing with saving an original wind is that you have the pickup in its original state. When you cut off a damaged coil you don’t know the number of windings and resistance or winding pattern. When you rewind it to some guesstimate spec the pickup will sound different.
Worse? Better? Who knows. But this here is more about preservation and keeping it original. That’s why I did what I did. And because I love tinkering. Plus: it was the cheapest, too. Can’t beat that!

User avatar
greens
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 74
Joined: Wed Feb 12, 2020 10:59 am

Re: 1966 Jazzmaster Restoration

Post by greens » Fri Apr 16, 2021 6:09 am

Ah, i didn't realize the wires were insulated, thanks. (I have no broken pickup, just curious)

User avatar
HNB
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 13513
Joined: Tue May 10, 2011 7:55 am
Location: Puyallup, Washington
Contact:

Re: 1966 Jazzmaster Restoration

Post by HNB » Fri Apr 16, 2021 8:46 am

That is really cool that you were able to repair those. Mad skills there. :D
Christopher
Lilith Guitars

User avatar
maximee
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 926
Joined: Mon Mar 05, 2012 2:07 pm
Location: Germany

Re: 1966 Jazzmaster Restoration

Post by maximee » Sun Apr 18, 2021 3:49 am

Ok, next things next. This is what's on today's menu: the JM along with a 1959/60 Supro Dual Tone and a vintage style Strat neck that I picked up along the way. I plan on doing the Supro and Strat neck first in order to fail better on the JM.
Image

Taping off the cavities and what's left of the original sunburst + ES stamp.
Image

Super-longscale conversion necks(TM) in place:
Image

Decided to leave as much of the heel only very lightly sanded, because you could still see the original stamps and markings, didn't want to risk losing any of the original factory traces. The slightly tinted lacquer should in theory blend nicely.
Image

After spraying the primer:
Image

JM fully primed and ready for some Inca Silver action
Image

First coat of Arctic White on the Supro and first mishap:
Image
Looks like the primer doesn't react well to the wood filler I used. After drying I wetsanded these fish eyes with 600 grit and luckily all has been fine for subsequent coats. I'm happy none of this is happening on the JM.

First coat of silver. I'm liking where this is going!
Image

After 4-5 coats of paint:
Image

Here are the necks after about five coats, I really like the tint and it perfectly matches the old lacquer on the heel.
Also, I didn't sand the original yellowed lacquer over the binding - I love how nitro seamlessly melts into existing finish after around 60 years.
Image

The finish came out pretty smooth and I hope I'll have no trouble sanding it back to a nice shiny finish when it's fully cured.
Image

Today, I'll finish with some more color coats on the bodies. If the weather allows it I'll be done with the clear coating in about 2-3 days and then it's at least 4 weeks drying time.

That's plenty of time to do the refret and also fiddle with some cool new neck resetting technique for my Höfner Verithin (featuring electricy and DIY heater elements :ph34r: ).

I'll keep you posted!
Last edited by maximee on Thu May 13, 2021 7:42 am, edited 1 time in total.

User avatar
HNB
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 13513
Joined: Tue May 10, 2011 7:55 am
Location: Puyallup, Washington
Contact:

Re: 1966 Jazzmaster Restoration

Post by HNB » Sun Apr 18, 2021 12:13 pm

Lovely!!
Christopher
Lilith Guitars

Post Reply