Squier Classic Vibe 70s Jaguar

Discussion of newer designs, copies and reissue offset-waist instruments.
User avatar
MayTheFuzzBeWithYou
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1251
Joined: Mon Jul 03, 2017 12:28 am
Location: Linz, Austria

Re: Squier Classic Vibe 70s Jaguar

Post by MayTheFuzzBeWithYou » Wed Aug 12, 2020 12:24 pm

Earlpilanz on ebay. From Glasgow.https://www.ebay.de/str/earlpilanz/ he seems to be away this week though - but back on Monday. Got all my replacement guards from him so far! :)
ShatoonBringerOfCorn wrote:
Tue Aug 11, 2020 10:19 am
Anyone in the UK/Europe got a recommendation for where to buy a replacement pickguard? I want to swap the tort out for parchment or maybe white pearl

User avatar
CROSS_guitars
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 2523
Joined: Tue Sep 09, 2008 5:52 am
Location: Thornbury Melbourne

Re: Squier Classic Vibe 70s Jaguar

Post by CROSS_guitars » Wed Aug 12, 2020 4:58 pm

manwithtitties wrote:
Wed Aug 12, 2020 11:03 am
CROSS_guitars wrote:
Tue Aug 11, 2020 7:26 pm
These look okay. did yours have the truss rod notch and the correct shaping under the upper control plate?
In regards to both questions: yes.

Image
Wow!
awesome!

User avatar
galvanism
PAT PEND
PAT PEND
Posts: 5
Joined: Tue Nov 17, 2020 10:17 am

Re: Squier Classic Vibe 70s Jaguar

Post by galvanism » Tue Dec 08, 2020 8:14 am

Here's mine, had it since march. I've made a few modifications and done my best to set it up.

First thing I did was put strap locks in.

I taped the bridge posts as I'm not one for vibrato. The guitar has been brilliant for tuning stability, even in my freezing cold bedroom, so I'll keep it like this.

I also shimmed the neck so the bridge wouldn't sit so low when I set the action.

I'm using 11-48 (power slinky) strings. As a bit of a beginner, I do find them stiff at times but I'm toughing it out, though I'd be lying if I said I hadn't considered 10-46s.

I've put in a 3 way switch for the pickups and made the bridge pickup switch a kill switch. The strangle switch functions as normal.

I did quite like the tort guard but I felt like it made the surf green look a little too pale. The new pickguard is a parchment colour but it's quite subtle unless you have a white to compare it to. I think it's an improvement.

Image

User avatar
mbe
PAT PEND
PAT PEND
Posts: 32
Joined: Fri Jul 31, 2020 9:13 am

Re: Squier Classic Vibe 70s Jaguar

Post by mbe » Tue Dec 08, 2020 8:49 am

@galvanism pickguard looks great and the fretBoard is a nice shade (darker).

User avatar
galvanism
PAT PEND
PAT PEND
Posts: 5
Joined: Tue Nov 17, 2020 10:17 am

Re: Squier Classic Vibe 70s Jaguar

Post by galvanism » Tue Dec 08, 2020 10:58 am

mbe wrote:
Tue Dec 08, 2020 8:49 am
@galvanism pickguard looks great and the fretBoard is a nice shade (darker).
@mbe thanks! I think a big contributor to the dark shade might be grimy fingers, noticing it's darker towards the headstock

User avatar
Backdrop
PAT PEND
PAT PEND
Posts: 23
Joined: Sun Jan 11, 2015 1:16 pm
Location: los angeles
Contact:

Re: Squier Classic Vibe 70s Jaguar

Post by Backdrop » Sat Dec 12, 2020 1:09 pm

Haven't posted here since 2016.

Image

User avatar
BoringPostcards
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 5845
Joined: Tue Jun 02, 2009 8:50 am
Location: Newfoundland

Re: Squier Classic Vibe 70s Jaguar

Post by BoringPostcards » Sat Dec 12, 2020 1:41 pm

Backdrop wrote:
Sat Dec 12, 2020 1:09 pm
Haven't posted here since 2016.

Image
Welcome back!. Beautiful Jag.
Det er mig der holder traeerne sammen.

User avatar
jdr1014
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 623
Joined: Fri Dec 16, 2011 8:02 am

Re: Squier Classic Vibe 70s Jaguar

Post by jdr1014 » Sat Dec 12, 2020 10:05 pm

Great way to resume posting! Congrats and enjoy :) . That's a very pretty sunburst Jag......

User avatar
Backdrop
PAT PEND
PAT PEND
Posts: 23
Joined: Sun Jan 11, 2015 1:16 pm
Location: los angeles
Contact:

Re: Squier Classic Vibe 70s Jaguar

Post by Backdrop » Sat Dec 12, 2020 10:26 pm

jdr1014 wrote:
Sat Dec 12, 2020 10:05 pm
Great way to resume posting! Congrats and enjoy :) . That's a very pretty sunburst Jag......
Thanks. One of the perks of Sweetwater letting you choose from the bunch. This one had the nicest burst and darkest neck compared to the others. Wasn't the lightest but being a bassplayer it didn't really matter.

User avatar
soul1
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 466
Joined: Wed Apr 16, 2008 10:25 pm

Re: Squier Classic Vibe 70s Jaguar

Post by soul1 » Fri Jun 04, 2021 3:00 pm

So it seems at some point Squier/Fender started using pickups with different specs in these. I believe for the first couple years, they were nearly identical to the Jag pickups in the VM models with the hotter bridge. I just measured the pickups in a late 2020 model and the neck pickup reads 6.12k and the bridge is 5.81k, so the bridge is much less than reported for the first version! Not sure if they changed suppliers or pickups due to the covid, or for some other reason.

User avatar
timtam
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 2133
Joined: Sun Oct 22, 2017 2:42 am
Location: Melbourne

Re: Squier Classic Vibe 70s Jaguar

Post by timtam » Fri Jun 04, 2021 7:29 pm

soul1 wrote:
Fri Jun 04, 2021 3:00 pm
So it seems at some point Squier/Fender started using pickups with different specs in these. I believe for the first couple years, they were nearly identical to the Jag pickups in the VM models with the hotter bridge. I just measured the pickups in a late 2020 model and the neck pickup reads 6.12k and the bridge is 5.81k, so the bridge is much less than reported for the first version! Not sure if they changed suppliers or pickups due to the covid, or for some other reason.
Yes, the VM's "Duncan-Designed" pickups had a big diff in DCR between neck (~5.8k) and bridge (~11.4k).
viewtopic.php?t=107830
Fender quotes +/- 10% DCR tolerance on their pickups, and so while the CV's are only "Fender-designed" (=> not Fender-made) it's possible that your 2020 CV pickups were designed to have nominally equal DCR.

Roswell (an arm of Korea's WSC Music) appear to be the pickup maker for the Classic Vibe Jazzmaster ....
viewtopic.php?f=6&t=112487&p=1563628&hi ... r#p1563628
... and it appears that they also did the (original) CV jag pickups ...
https://touch.adverts.ie/guitar-accesso ... p/21978160
Roswell list a neck jag pickup at 5.9k and jag bridge at 11.8k ...
https://roswellpickups.com/product/jg-adwh-n/
https://roswellpickups.com/product/jg-adwh-b/
https://shoppartsland.com/jg-n-adwh/
"I just knew I wanted to make a sound that was the complete opposite of a Les Paul, and that’s pretty much a Jaguar." Rowland S. Howard.

User avatar
mbe
PAT PEND
PAT PEND
Posts: 32
Joined: Fri Jul 31, 2020 9:13 am

Re: Squier Classic Vibe 70s Jaguar

Post by mbe » Sat Jun 05, 2021 5:37 am

soul1 wrote:
Fri Jun 04, 2021 3:00 pm
So it seems at some point Squier/Fender started using pickups with different specs in these. I believe for the first couple years, they were nearly identical to the Jag pickups in the VM models with the hotter bridge. I just measured the pickups in a late 2020 model and the neck pickup reads 6.12k and the bridge is 5.81k, so the bridge is much less than reported for the first version! Not sure if they changed suppliers or pickups due to the covid, or for some other reason.
Most likely Fender using up old stocks of VM Jag pickups on the new Classic Vibe Jags. On my CV Jag the label on the newer CV pickups reads "Bass VI/Jaguar" and measure 5.8 bridge and 6.2 neck. So I swapped mine over from bridge to neck and vice versa and I think it sounds better for balance.

User avatar
sciuri
PAT PEND
PAT PEND
Posts: 26
Joined: Mon Sep 09, 2019 7:48 pm

Re: Squier Classic Vibe 70s Jaguar

Post by sciuri » Tue Jun 29, 2021 11:39 am

Just got a shell pink one and setting it up! I switched to a mint pickguard but would like to get more aged white or cream pickup covers to match it better. The stock ones are noticeably whiter than my other Fender "aged white" plastics.

Does anyone know the pole spacing on the pickups (51.5mm or 52mm)? My measurement tools and eyes are not precise enough to make out a 0.5mm difference, and the Fender USA Jaguar pickup covers (005-4492-049) are 51.5mm per a vendor.

Or if you know of other brands that are known fits, please let me know! Thanks!

EDIT: The Fender USA Jaguar pickup covers 005-4492-049 do indeed fit my Squier CV 70s Jaguar. I didn't find exact measurements for the pickup covers, but I did find out Bare Knuckle uses these covers for the Marr pickups, the pole spacing of which is 52.2mm.

User avatar
sciuri
PAT PEND
PAT PEND
Posts: 26
Joined: Mon Sep 09, 2019 7:48 pm

Re: Squier Classic Vibe 70s Jaguar

Post by sciuri » Mon Jul 05, 2021 10:09 am

Opinions between the stock pickup covers versus more aged looking ones from Fender?

Stock Squier:
Image

Fender aged white:
Image

User avatar
Amon 7.L
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 696
Joined: Sun Aug 28, 2011 5:45 am

Re: Squier Classic Vibe 70s Jaguar

Post by Amon 7.L » Mon Jul 05, 2021 10:41 am

Normally I would prefer the stock ones but the aged ones look like like a better match to the colour of the binding.

Post Reply