Fender Japan Junior Series - 24” Scale Jazzmaster

Discussion of newer designs, copies and reissue offset-waist instruments.
User avatar
GilmourD
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1819
Joined: Fri Apr 24, 2020 8:11 pm
Location: Rutherford, NJ

Re: Fender Japan Junior Series - 24” Scale Jazzmaster

Post by GilmourD » Wed Apr 24, 2024 11:19 am

drybiro wrote:
Wed Apr 24, 2024 10:40 am
Just measured my Jazzmaster against my Mustang and there is definitely a difference between the necks. I've tried to take a photo showing the difference when holding the necks together at the nut. On the Mustang I measure 11mm from the bottom edge of the 22nd fret to the bottom edge of the neck between the D and G strings. On the Jazzmaster it's 6mm from the 22nd fret to the bottom of the neck.

I've not got a normal Jazzmaster to compare it to but I think the whole thing has been shrunk and shifted

Image
RPadTV wrote:
Tue Apr 23, 2024 12:56 pm
thinking of picking one of these up. doesn't anyone know if the upper cavity has enough room for a proper rhythm circuit?
There is a fairly big route where the rhythm circuit would normally be so you could definitely squeeze something in there but going off the dimensions I found in this picture (https://i.ebayimg.com/images/g/6xMAAOSw ... -l1200.jpg) I don't think you could just drop in the circuit from a full size Jazzmaster.

Image
So, what's the distance from the centerline of the thimbles to the edge of the neck pocket?

User avatar
drybiro
PAT PEND
PAT PEND
Posts: 14
Joined: Tue Jun 01, 2021 2:20 pm

Re: Fender Japan Junior Series - 24” Scale Jazzmaster

Post by drybiro » Wed Apr 24, 2024 11:56 am

GilmourD wrote:
Wed Apr 24, 2024 11:19 am
So, what's the distance from the centerline of the thimbles to the edge of the neck pocket?
I'm measuring it as 170mm give or take a mm.

User avatar
GilmourD
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1819
Joined: Fri Apr 24, 2020 8:11 pm
Location: Rutherford, NJ

Re: Fender Japan Junior Series - 24” Scale Jazzmaster

Post by GilmourD » Wed Apr 24, 2024 4:15 pm

drybiro wrote:
Wed Apr 24, 2024 11:56 am
GilmourD wrote:
Wed Apr 24, 2024 11:19 am
So, what's the distance from the centerline of the thimbles to the edge of the neck pocket?
I'm measuring it as 170mm give or take a mm.
Interesting... A regular Jazzmaster is about 7-1/8" (180-ish mm) and a regular Jaguar is roughly 6-1/4" (158-ish mm).

So, they reinvented the wheel for this instead of giving us cool parts to play with. 😭

User avatar
RPadTV
PAT PEND
PAT PEND
Posts: 2
Joined: Tue Apr 23, 2024 12:50 pm

Re: Fender Japan Junior Series - 24” Scale Jazzmaster

Post by RPadTV » Wed Apr 24, 2024 4:23 pm

GilmourD wrote:
Wed Apr 24, 2024 11:19 am
There is a fairly big route where the rhythm circuit would normally be so you could definitely squeeze something in there but going off the dimensions I found in this picture (https://i.ebayimg.com/images/g/6xMAAOSw ... -l1200.jpg) I don't think you could just drop in the circuit from a full size Jazzmaster.
thanks very much! maybe I'll get a custom pickguard and put two mini-toggles up top for series/parallel and phase switching. it looks like there's enough room for that.

Post Reply