Calling All Wiring Gurus! A Little Help Needed

For help with setups and other technical issues.
Post Reply
User avatar
andy
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 978
Joined: Fri Jul 18, 2008 7:43 pm
Location: Regina, SK

Calling All Wiring Gurus! A Little Help Needed

Post by andy » Sun Jan 10, 2021 10:45 am

I have been dreaming an interesting wiring idea for a few days now. It is for my Fender 1000 pedal steel. It has two necks with two pickups per neck. For each neck I would like to have a series/parallel switch and a blend pot before heading to a CRL 3-way switch that switches between each neck (or both, of course). I also have a stutter switch in there because why not! :D

If someone would take a look at this wiring diagram I drew up and tell me if there are any mistakes I would be very thankful. Also, if anyone has any experience with blend pots (I have none!) that would be appreciated.
Image

This is the type of blend pot I have:
https://nextgenguitars.ca/products/bour ... d-pot.html
Send me western swing vids

User avatar
Shadoweclipse13
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 9828
Joined: Fri Feb 07, 2014 9:22 pm
Location: Stuck in the dimension of imagination

Re: Calling All Wiring Gurus! A Little Help Needed

Post by Shadoweclipse13 » Thu Jan 14, 2021 12:16 am

That looks perfect to me. The only thing I'd suggest is wiring the killswitch/stutter like this:

Image

Explanation why: Premier Guitar - The (In)famous Stratocaster Kill Switch

Even if you leave the killswitch as it is, it will still work though! That's just to prevent any unnecessary noise.
Pickup Switching Mad Scientist
http://www.offsetguitars.com/forums/viewtopic.php?f=8&t=104282&p=1438384#p1438384

Post Reply