The SS-23F19 appears to mainly be on-off-on in most forms I can see. The SS is slide switch, the "23" is the equivalent of 2t3P ie: DP3T.
The F is the travel length, the 19 is then a serial number that indicates which numeric version you get. Then you can get a -Gxx where xx is the lever height. There seems to be no rhyme or reason to whether you get solder lugs or mounting screw holes or what screw holes you get.
That part number is in use in a "generic" sense, so uxcell's version of that part might be wildly different than bituo's, etc. All you need to know is you're getting the switch that fits in the hole for travel, the solder connections and moutning tabs are /shruggie
The other part number that would likely work is the 23H25 which seems to come in a couple styles with and without mounting tabs the correct size. These are all 8 pin connections, so likely to be on-on-on pinout. The main issue with this one is it's 25mm between screws when it does have mounting holes, so possibly a skosh too small.
3 way mini slider switch? JM size?
- MirageIndigo
- PAT PEND
- Posts: 42
- Joined: Sun Oct 25, 2020 6:09 pm