Who is doing nitro finished bodies? Pre-wired kits?
- Braunzo
- PAT PEND
- Posts: 42
- Joined: Mon Jan 12, 2015 1:24 pm
Who is doing nitro finished bodies? Pre-wired kits?
Hello all,
Long-time lurker and very rare poster.
I'm looking to build a Jaguar and found a great body on eBay that was going to be exactly what I needed only to be outbid by just a few bucks. I contacted the person who made the body and they said that they don't do custom orders.
With that said, who out there is reputable in doing nitro finished bodies? I know there's MJT, but that seems pretty pricey unless my gauge on this whole thing is off.
Also, is there anyone doing pre-wired Jag kits? I'm atrocious at soldering. Ideally, I'd love the standard rhythm circuit coupled with the Johnny Marr style four-way switch.
Thanks, everyone!
Long-time lurker and very rare poster.
I'm looking to build a Jaguar and found a great body on eBay that was going to be exactly what I needed only to be outbid by just a few bucks. I contacted the person who made the body and they said that they don't do custom orders.
With that said, who out there is reputable in doing nitro finished bodies? I know there's MJT, but that seems pretty pricey unless my gauge on this whole thing is off.
Also, is there anyone doing pre-wired Jag kits? I'm atrocious at soldering. Ideally, I'd love the standard rhythm circuit coupled with the Johnny Marr style four-way switch.
Thanks, everyone!
- Jonesie
- PAT. # 2.972.923
- Posts: 4073
- Joined: Sat Aug 09, 2008 7:00 am
- Location: Massachusetts
Re: Who is doing nitro finished bodies? Pre-wired kits?
Honestly, in doing my research the MJT stuff is pretty fairly priced. $980 for a US made and finished guitar with hardware included (minus electronics and pickups) seems like a fair price, at least.
- Unicorn Warrior
- PAT. # 2.972.923
- Posts: 3511
- Joined: Sun Jul 22, 2012 5:58 pm
- Location: Kentucky, USA
Re: Who is doing nitro finished bodies? Pre-wired kits?
MJT did mine. They’re not pristine, but they gave me the finish I asked for. There are others who pay more attention to detail but they’re often more expensive.
I got a pre-wired Jazzmaster harness from 920d custom. This is the quietest single coil guitar I’ve owned and couldn’t be happier with their product. The pups still had to be wired in, but the harness was ready to go.
I got a pre-wired Jazzmaster harness from 920d custom. This is the quietest single coil guitar I’ve owned and couldn’t be happier with their product. The pups still had to be wired in, but the harness was ready to go.
- Embenny
- PAT. # 2.972.923
- Posts: 10363
- Joined: Tue May 24, 2016 5:07 am
Re: Who is doing nitro finished bodies? Pre-wired kits?
MJT finishes are thin and designed to fall apart and age easily. That may be what you want, but if you want a nitro finish that starts off looking like a new nitro Fender and ages normally they are not the people to do it. Their Jag and JM bodies also have some inaccurate quirks like sharper roundovers and contours and mine fit MIJ Jaguar guards better than USA spec ones.
Guitar Mill isn't cheap but you get what you pay for. They do aged finishes too, but their new and NOS type finishes are superb. I don't know anyone else who is doing the same variety of high quality custom bodies with the same variety of high quality custom nitro finishes. Their contours are gorgeous and their finish work is top notch. As someone who's owned both (and liked the MJT well enough), Guitar Mill is in a higher tier of workmanship all around.
Guitar Mill isn't cheap but you get what you pay for. They do aged finishes too, but their new and NOS type finishes are superb. I don't know anyone else who is doing the same variety of high quality custom bodies with the same variety of high quality custom nitro finishes. Their contours are gorgeous and their finish work is top notch. As someone who's owned both (and liked the MJT well enough), Guitar Mill is in a higher tier of workmanship all around.
The artist formerly known as mbene085.
- andy_tchp
- PAT. # 2.972.923
- Posts: 8050
- Joined: Fri Apr 02, 2010 1:36 am
- Location: Brisbane
Re: Who is doing nitro finished bodies? Pre-wired kits?
^ Agreed with Mike (mbene085).
Also a fully assembled 'prewired' Jaguar harness doesn't really work. Assuming a vintage style body there are channels the (unterminated) wires need to be fed through prior to soldering.
Those are also very expensive for what you get IMNSHO.
Also a fully assembled 'prewired' Jaguar harness doesn't really work. Assuming a vintage style body there are channels the (unterminated) wires need to be fed through prior to soldering.
Those are also very expensive for what you get IMNSHO.
"I don't know why we asked him to join the band 'cause the rest of us don't like country music all that much; we just like Graham Lee."
David McComb, 1987.
David McComb, 1987.
- kingmedicine
- PAT. # 2.972.923
- Posts: 178
- Joined: Wed Jul 14, 2010 9:45 am
- Location: Detroit, MI
Re: Who is doing nitro finished bodies? Pre-wired kits?
I agree with the others. I’ve had both Guitar Mill and MJT finished bodies, and the quality of the work and durability of the finish has been much better on the Guitar Mill stuff (worth the extra cost in my opinion). Honestly, I think MJT is on the cheaper end for nitro finished bodies from what I had found at the time.
You could also check out DoomBloom on Reverb (slightly cheaper than MJT, I think he’s a former employee there so finishes look sort of similar). Or you can find pretty good deals on used MJT stuff if you’re patient.
You could also check out DoomBloom on Reverb (slightly cheaper than MJT, I think he’s a former employee there so finishes look sort of similar). Or you can find pretty good deals on used MJT stuff if you’re patient.
Last edited by kingmedicine on Thu Sep 23, 2021 6:32 am, edited 1 time in total.
- Braunzo
- PAT PEND
- Posts: 42
- Joined: Mon Jan 12, 2015 1:24 pm
Re: Who is doing nitro finished bodies? Pre-wired kits?
Appreciate it, y'all.
I don't need something to look beat up. But if it's lightly aged, it won't bother me much. Shiny new things mean I try to baby them and inevitably I wind up dinging them and feeling bad for no good reason.
In regard to the pre-wired pickguards and all that... I didn't think about the channels. I just worry because I'm a bit of a dolt when it comes to wiring and there aren't really many guitar techs in this area, let alone good ones.
I don't need something to look beat up. But if it's lightly aged, it won't bother me much. Shiny new things mean I try to baby them and inevitably I wind up dinging them and feeling bad for no good reason.
In regard to the pre-wired pickguards and all that... I didn't think about the channels. I just worry because I'm a bit of a dolt when it comes to wiring and there aren't really many guitar techs in this area, let alone good ones.
- lastactionhero12765
- PAT. # 2.972.923
- Posts: 51
- Joined: Wed Sep 15, 2021 9:50 am
Re: Who is doing nitro finished bodies? Pre-wired kits?
Have you thought about trying to get a solderless pre-wired harness? I'm in the same boat as you in that my soldering is sub-par (at best haha) and I've had good experience on other builds/mods with solderless harnesses. Jaguars don't seem to be common (i.e., I can't find any pre-made, pre-wired solderless kits) but you might be able to reach out to smaller builders who could do a custom job. I've heard nothing but good things about KellingSound88 on Ebay.
- Braunzo
- PAT PEND
- Posts: 42
- Joined: Mon Jan 12, 2015 1:24 pm
Re: Who is doing nitro finished bodies? Pre-wired kits?
I'd be open to the idea but I'm not sure where I'd find one at this point. I might just have to bite the bullet and drive the eventual guitar out of town to have work done.lastactionhero12765 wrote: ↑Fri Sep 24, 2021 4:39 amHave you thought about trying to get a solderless pre-wired harness? I'm in the same boat as you in that my soldering is sub-par (at best haha) and I've had good experience on other builds/mods with solderless harnesses. Jaguars don't seem to be common (i.e., I can't find any pre-made, pre-wired solderless kits) but you might be able to reach out to smaller builders who could do a custom job. I've heard nothing but good things about KellingSound88 on Ebay.