Hello All,
I’ve seen a few conversations and posts elsewhere, but I can’t seem to find a decent or straightforward ‘Tornipulator’ wiring diagram. I have some idea of how I would incorporate it into my my Jag build, but if anyone could share any pictures, diagrams, or drawings relative to this setup in a Deimel, Koll, Ronin, Jag, or JM, I would really appreciate the info.
Thanks!
Tornipulator Wiring Diagram
- bodhi
- PAT. # 2.972.923
- Posts: 464
- Joined: Mon May 20, 2019 12:47 pm
Re: Tornipulator Wiring Diagram
Try this one: https://www.thegearpage.net/board/index ... r.1933483/
Jazzmaster project (got a body, placeholder neck, some pickups and ideas)
Tokai Telecaster Thinline with Creamery Pickups Filtertron and Tapped Tele
Blake Mills-inspired Strat project w/ Gold Foil and slide pickup
Tokai Telecaster Thinline with Creamery Pickups Filtertron and Tapped Tele
Blake Mills-inspired Strat project w/ Gold Foil and slide pickup
- 81silverburst
- PAT PEND
- Posts: 3
- Joined: Sat Feb 20, 2021 1:12 pm
Re: Tornipulator Wiring Diagram
Thank you, bodhi ! I have sifted through this thread a few times before, but I’m still seeking out any other schematics or interpretations that members might be able to share.
- bodhi
- PAT. # 2.972.923
- Posts: 464
- Joined: Mon May 20, 2019 12:47 pm
Re: Tornipulator Wiring Diagram
Well, one version is here: https://www.thegearpage.net/board/index ... t-29240487
It's basically
- killswitch: connect output jack lead to output jack ground
- alternatively, if using a guitar input jack, pick one with a n/c (no connection) lug and set it up so that if there's no jack there the wire to the momentary switch should be grounded through the n/c lug
- 60 cycle hum: disconnect output jack ground, eg. have floating ground in the guitar which should cause hum from the circuitry to the output
- harmonica microphone switch: connect output of this to output jack via a toggle switch
All switches should be momentary spdt.
It's basically
- killswitch: connect output jack lead to output jack ground
- alternatively, if using a guitar input jack, pick one with a n/c (no connection) lug and set it up so that if there's no jack there the wire to the momentary switch should be grounded through the n/c lug
- 60 cycle hum: disconnect output jack ground, eg. have floating ground in the guitar which should cause hum from the circuitry to the output
- harmonica microphone switch: connect output of this to output jack via a toggle switch
All switches should be momentary spdt.
Jazzmaster project (got a body, placeholder neck, some pickups and ideas)
Tokai Telecaster Thinline with Creamery Pickups Filtertron and Tapped Tele
Blake Mills-inspired Strat project w/ Gold Foil and slide pickup
Tokai Telecaster Thinline with Creamery Pickups Filtertron and Tapped Tele
Blake Mills-inspired Strat project w/ Gold Foil and slide pickup
- 81silverburst
- PAT PEND
- Posts: 3
- Joined: Sat Feb 20, 2021 1:12 pm
Re: Tornipulator Wiring Diagram
I appreciate this info. Thanks again, bodhi.