Where can I find large bare PCBs to cut pickguards from?

Talk about modding or building your own guitar from scratch.
User avatar
LVC
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1933
Joined: Wed Dec 28, 2011 12:38 pm
Location: France

Where can I find large bare PCBs to cut pickguards from?

Post by LVC » Mon Jun 07, 2021 4:00 am

I'm a big fan of the Hallmark Man... or Astro-Man? signature, which uses a PCB cut to shape for a pickguard.

Image

I would like to do something similar on my new Paranormal Super-Sonic, but finding a suitable PCB is turning out to be trickier than I thought.
To be usable as a pickguard, a PCB would need to be:
- Large (I think about 18x21cm for a Super-Sonic, larger for other models)
- Bare, i.e. free of any component or solder blobs. As much easier, cheaper and more satisfying as recycling a used PCB would be, the feel would amount to using a particularly sharp cheese grater for a pickguard
- Green, for the sake of aesthetics; with green solder mask a definite plus, and white silkscreen a nice touch, as in the picture above.

There are countless companies online who will make custom PCB prototypes on demand, but apparently it can get very pricey in larger sizes. Besides, you need to provide a CAD file for the PCB to be made from, and that's not something I have any experience with; not to mention that it would probably take quite a bit of effort for something that would be electronically nonfunctional and decorative only. So I suppose my best bet would be to try and find a big PCB from some kind of kit... But so far I haven't found anything large enough; I only have experience with DIY effects kits, which typically use much smaller boards.

If anyone has a lead to large, affordable PCBs that could be suitable for this purpose, please let me know!
Last edited by LVC on Mon Jun 07, 2021 5:13 am, edited 3 times in total.
Create art, not content

User avatar
sal paradise
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 3596
Joined: Thu May 27, 2021 12:41 am

Re: Where can I find large bare PCBs to cut pickguards from?

Post by sal paradise » Mon Jun 07, 2021 4:13 am

Wouldn’t a photo of a board be a more useable solution?
I have nothing to offer anybody, except my own confusion?

User avatar
LVC
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1933
Joined: Wed Dec 28, 2011 12:38 pm
Location: France

Re: Where can I find large bare PCBs to cut pickguards from?

Post by LVC » Mon Jun 07, 2021 4:21 am

sal paradise wrote:
Mon Jun 07, 2021 4:13 am
Wouldn’t a photo of a board be a more useable solution?

But... But... That would be CHEATING!!!! :wtf:

Seriously, this is my backup plan — clear acrylic guard with a printout of a PCB underneath. But a real board would look so much better, and be so much cooler 8)
Create art, not content

User avatar
Pepe Silvia
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 5700
Joined: Thu May 14, 2009 11:44 am
Location: Philadelphia

Re: Where can I find large bare PCBs to cut pickguards from?

Post by Pepe Silvia » Mon Jun 07, 2021 5:38 am

I was looking at various PCB boards you can buy for amp and effects kits but can't find anything large enough

User avatar
epizootics
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 719
Joined: Wed Jun 28, 2017 10:29 pm
Location: Lyon, France

Re: Where can I find large bare PCBs to cut pickguards from?

Post by epizootics » Mon Jun 07, 2021 5:44 am

That's a really cool idea!
It piqued my interest so I gave it a go online - no dice.

The two things I can think of are:

-1: Give those custom PCB companies a call. Ask them if they happen to have some defective/surplus PCBs somewhere in the warehouse. They probably do, unless they never f**k-up an order (which would be surprising).
-2: Find multiple small ones, find a way to arrange them together and epoxy them onto an underlayer of acrylic or whatever material you'd want to use.

User avatar
MattK
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 3569
Joined: Sun Aug 10, 2008 9:51 pm
Location: Hobart, Australia

Re: Where can I find large bare PCBs to cut pickguards from?

Post by MattK » Mon Jun 07, 2021 5:55 am

The board in the photo is a computer motherboard, for what it’s worth. Can’t generally buy them unsoldered though.

User avatar
PorkyPrimeCut
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 24464
Joined: Tue Nov 28, 2006 7:46 am
Location: Leipzig
Contact:

Re: Where can I find large bare PCBs to cut pickguards from?

Post by PorkyPrimeCut » Mon Jun 07, 2021 6:16 am

What a fun idea!

I had a little dig around & the biggest I could see was a scrap piece sold in Israel, about 10cm x 21cm.

I also saw several "Telecom Boards" which could be a useful keyword, although they all looked quite boring - rows of rectangles to hold identically sized PCBs - instead of the more complex & cool looking smaller ones.

Try searching for "Server Boards" too, along with the word "Scrap".
You think you can't, you wish you could, I know you can, I wish you would. Slip inside this house as you pass by.

User avatar
LVC
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1933
Joined: Wed Dec 28, 2011 12:38 pm
Location: France

Re: Where can I find large bare PCBs to cut pickguards from?

Post by LVC » Mon Jun 07, 2021 6:55 am

Thanks a lot for the pointers! :-*

A quick search for "Bare motherboard" on eBay is bringing up interesting results — some very cheap, some upwards of $150. :wtf: I haven't seen anything big enough yet, but this is going in a promising direction. I'll have a more thorough search when I get home.
Create art, not content

User avatar
epizootics
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 719
Joined: Wed Jun 28, 2017 10:29 pm
Location: Lyon, France

Re: Where can I find large bare PCBs to cut pickguards from?

Post by epizootics » Mon Jun 07, 2021 7:53 am

LVC wrote:
Mon Jun 07, 2021 6:55 am
Thanks a lot for the pointers! :-*

A quick search for "Bare motherboard" on eBay is bringing up interesting results — some very cheap, some upwards of $150. :wtf: I haven't seen anything big enough yet, but this is going in a promising direction. I'll have a more thorough search when I get home.
Well done! I guess you've seen this one already?

https://www.ebay.co.uk/itm/154417376235 ... SwXMNdRzVi

What are the minimum blank dimensions for the Super-Sonic? I'll have a look in the fab lab at Grrrnd Zero (Lyon), I know they keep all sorts of electronic-related junk there and I organize a weekly 'gonzo-lutherie-from-reclaimed-things' workshop there...

User avatar
DeathJag
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 2297
Joined: Wed Aug 08, 2018 11:44 am

Re: Where can I find large bare PCBs to cut pickguards from?

Post by DeathJag » Mon Jun 07, 2021 8:11 am

Off topic - Anyone ever try formica? I was looking at a 50s table and thought it would make a cool pick guard.

User avatar
Embenny
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 10363
Joined: Tue May 24, 2016 5:07 am

Re: Where can I find large bare PCBs to cut pickguards from?

Post by Embenny » Mon Jun 07, 2021 11:16 am

What if you bought a cheap used one, pulled off the components, flipped it upside down, put it in a mold, then poured a thin layer of acrylic resin until you reached the tallest solder blob? More labour, but you'd have your pick of any old garbage board you could find, and would have a perfectly smooth guard. It'd be thick for a pickguard, but super cool.
The artist formerly known as mbene085.

User avatar
Augs
PAT PEND
PAT PEND
Posts: 16
Joined: Sun Jun 06, 2021 2:17 pm
Location: London, UK
Contact:

Re: Where can I find large bare PCBs to cut pickguards from?

Post by Augs » Mon Jun 07, 2021 11:21 am

You could buy some motherboards and glue them together, or find some junk TVs and open them up. PCBs will glue together really well with gorilla glue I reckon.

User avatar
andy_tchp
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 8010
Joined: Fri Apr 02, 2010 1:36 am
Location: Brisbane

Re: Where can I find large bare PCBs to cut pickguards from?

Post by andy_tchp » Mon Jun 07, 2021 4:18 pm

Rackmount servers will have large motherboards, but you'll need to desolder components if you want them unpopulated (not difficult but time consuming).

PABX-es will have some pretty large but comparatively sparsely populated circuit boards if you can find one that's been decommissioned that hasn't yet been taken to the dump.


Both of the above may be achievable if you have any friends or contacts in the IT infrastructure space.
"I don't know why we asked him to join the band 'cause the rest of us don't like country music all that much; we just like Graham Lee."
David McComb, 1987.

User avatar
BTL
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1450
Joined: Tue Jul 12, 2011 1:24 pm
Contact:

Re: Where can I find large bare PCBs to cut pickguards from?

Post by BTL » Mon Jun 07, 2021 5:57 pm

You may want to look into prototyping boards or breadboards:

https://www.newark.com/c/tools-producti ... -too-bre_0
Owner, Lowe Custom Guitars

User avatar
bodhi
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 453
Joined: Mon May 20, 2019 12:47 pm

Re: Where can I find large bare PCBs to cut pickguards from?

Post by bodhi » Tue Jun 08, 2021 10:43 am

I'd go with an old motherboard with all the components desoldered... At least locally I can (probably) easily find non-functional ATX-sized computers for free or pocket change, not that I've bothered to look since they're functionally recycleable waste.
Jazzmaster project (got a body, placeholder neck, some pickups and ideas)
Tokai Telecaster Thinline with Creamery Pickups Filtertron and Tapped Tele
Blake Mills-inspired Strat project w/ Gold Foil and slide pickup

Post Reply