OffsetGuitars.com

So I came up with this ultimate Jaguar switch mod. What do you think? Would it be possible to wire it? https://flic.kr/p/2qRDQR1

I'm no expert but I'm not sure this would all work together, plus you would need a custom rhythm plate made for the three-way Mustang-style switches.

therizzla wrote: ↑

Wed Mar 12, 2025 2:33 pm

I'm no expert but I'm not sure this would all work together, plus you would need a custom rhythm plate made for the three-way Mustang-style switches.

The Mustang switches could fit in the standard RC plate with an adapter/spacer... But...

There's a switch for the RC but no longer any RC controls.

The Mustang switches can be made to do series/parallel with just the two 3-way switches without losing any other combinations.

As such, you have two switches on the main selector plate that don't do anything anymore.

GilmourD wrote: ↑

Thu Mar 13, 2025 7:34 am

therizzla wrote: ↑

Wed Mar 12, 2025 2:33 pm

I'm no expert but I'm not sure this would all work together, plus you would need a custom rhythm plate made for the three-way Mustang-style switches.

The Mustang switches could fit in the standard RC plate with an adapter/spacer... But...

There is an adaptor to mount them? The plate doesn't have holes for the mounting screws.

therizzla wrote: ↑

Thu Mar 13, 2025 7:38 am

GilmourD wrote: ↑

Thu Mar 13, 2025 7:34 am

therizzla wrote: ↑

Wed Mar 12, 2025 2:33 pm

I'm no expert but I'm not sure this would all work together, plus you would need a custom rhythm plate made for the three-way Mustang-style switches.

The Mustang switches could fit in the standard RC plate with an adapter/spacer... But...

There is an adaptor to mount them? The plate doesn't have holes for the mounting screws.

I can't remember his username but there's somebody who's posted on here that he makes them out of circuitboard material. I feel like I've seen 3D printed versions, too.

GilmourD wrote: ↑

Thu Mar 13, 2025 8:45 am

therizzla wrote: ↑

Thu Mar 13, 2025 7:38 am

GilmourD wrote: ↑

Thu Mar 13, 2025 7:34 am

The Mustang switches could fit in the standard RC plate with an adapter/spacer... But...

There is an adaptor to mount them? The plate doesn't have holes for the mounting screws.

I can't remember his username but there's somebody who's posted on here that he makes them out of circuitboard material. I feel like I've seen 3D printed versions, too.

I missed those!

GilmourD wrote: ↑

Thu Mar 13, 2025 8:45 am

therizzla wrote: ↑

Thu Mar 13, 2025 7:38 am

GilmourD wrote: ↑

Thu Mar 13, 2025 7:34 am

The Mustang switches could fit in the standard RC plate with an adapter/spacer... But...

There is an adaptor to mount them? The plate doesn't have holes for the mounting screws.

I can't remember his username but there's somebody who's posted on here that he makes them out of circuitboard material. I feel like I've seen 3D printed versions, too.

True dat forum member Jaga, but in order to accommodate those the control cavity needs to be fully routed. Some models will require modification.

In this thread:
https://www.offsetguitars.com/forums/v ... 7#p1699157