What's on your workbench right now?

Talk about modding or building your own guitar from scratch.
User avatar
niksureal
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 3217
Joined: Sun Jan 25, 2009 9:33 am
Location: Austin Area
Contact:

Re: What's on your workbench right now?

Post by niksureal » Wed Nov 18, 2020 4:30 pm

bodhi wrote:
Tue Nov 17, 2020 10:50 am
Shadoweclipse13 wrote:
Tue Nov 17, 2020 3:34 am
niksureal wrote:
Mon Nov 16, 2020 5:42 pm
Image
I love the top-routed control cavity!! And the neck inlays :?
Yeah, really sweet! Could maybe be interpreted as a Halloween-themed one :) What are the pickups?
Just a gfs goldfoil in bridge. In the neck is an old teisco pickup that I rebuilt.

User avatar
funkyeah!
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 856
Joined: Mon Feb 07, 2011 11:02 am
Location: Virginia

Re: What's on your workbench right now?

Post by funkyeah! » Wed Nov 18, 2020 6:59 pm

SuperAxe wrote:
Wed Nov 18, 2020 2:28 pm
Good luck with yours. Any electronics going in?
Not yet I do plan on using it as my gigging nylon so will probably get some mic/piezo blending situation like an Anthem. I think I’ll be able to just fit my arm in that big soundhole with the fretboard extension
Some days you just can't get rid of a bomb.

User avatar
Perry
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 321
Joined: Sat May 01, 2010 5:24 am

Re: What's on your workbench right now?

Post by Perry » Thu Nov 19, 2020 2:29 am

This should become an octave mandolin. Approximately 504mm (around 19 inches) scale length. This is a new body I am making for it. The previous one was a little small. It was also a different shape. This one was inspired by the Peavey Razer.

Image

I haven't worked out the bridge yet. I made a wooden archtop style bridge for the other body, but it may look out-of-place on this body. I'm thinking of just making individual saddles that I can easily move around. There's a lot of sanding left to do, and the body is bubinga, so it will be a chore to sand and route. I will use a rail Tele neck pickup with splitable coils. One volume and tone with a mini switch to select humbucker or single coli mode.

Image

User avatar
Rgand
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1164
Joined: Sun Mar 05, 2017 3:55 pm

Re: What's on your workbench right now?

Post by Rgand » Thu Nov 19, 2020 7:09 am

Perry wrote:
Thu Nov 19, 2020 2:29 am
Image

I haven't worked out the bridge yet. I made a wooden archtop style bridge for the other body, but it may look out-of-place on this body. I'm thinking of just making individual saddles that I can easily move around. There's a lot of sanding left to do, and the body is bubinga, so it will be a chore to sand and route. I will use a rail Tele neck pickup with splitable coils. One volume and tone with a mini switch to select humbucker or single coli mode.
I made a custom solid body mandolin one time. I used a rosewood archtop bridge and a Tele neck pickup. It looked really good. You probably won't be disappointed with that. That was many years ago and I don't have any photos of it or I'd post one.

User avatar
Perry
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 321
Joined: Sat May 01, 2010 5:24 am

Re: What's on your workbench right now?

Post by Perry » Thu Nov 19, 2020 9:28 pm

Rgand wrote:
Thu Nov 19, 2020 7:09 am
I made a custom solid body mandolin one time. I used a rosewood archtop bridge and a Tele neck pickup. It looked really good. You probably won't be disappointed with that. That was many years ago and I don't have any photos of it or I'd post one.
Thanks for your comment. I'll try to post a photo next week of the body with the archtop bridge I made. I'm still leaning towards the individual saddles, possibly made from brass.

User avatar
Rgand
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1164
Joined: Sun Mar 05, 2017 3:55 pm

Re: What's on your workbench right now?

Post by Rgand » Thu Nov 19, 2020 9:32 pm

Perry wrote:
Thu Nov 19, 2020 9:28 pm
Rgand wrote:
Thu Nov 19, 2020 7:09 am
I made a custom solid body mandolin one time. I used a rosewood archtop bridge and a Tele neck pickup. It looked really good. You probably won't be disappointed with that. That was many years ago and I don't have any photos of it or I'd post one.
Thanks for your comment. I'll try to post a photo next week of the body with the archtop bridge I made. I'm still leaning towards the individual saddles, possibly made from brass.
Looking forward to that. Brass saddles will look great.

User avatar
Perry
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 321
Joined: Sat May 01, 2010 5:24 am

Re: What's on your workbench right now?

Post by Perry » Mon Nov 23, 2020 2:57 pm

Thanks for your comment. Here's the bubinga bridge that I made some time ago. I have routed the pocket for the neck, but I need to check the neck angle and decide if I want to go with this bridge or make individual saddles. More later.

Image

User avatar
Flurko
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 486
Joined: Sun Oct 05, 2008 8:05 am
Location: Strasbourg, France
Contact:

Re: What's on your workbench right now?

Post by Flurko » Tue Nov 24, 2020 7:14 am

Does illustrator count as my workbench ? :ph34r:
Just throwing ideas around, never thought finding a cool cutaway design was so difficult !

Image

User avatar
HarlowTheFish
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 127
Joined: Mon Aug 10, 2020 7:09 pm

Re: What's on your workbench right now?

Post by HarlowTheFish » Tue Nov 24, 2020 9:19 am

Flurko wrote:
Tue Nov 24, 2020 7:14 am
Does illustrator count as my workbench ? :ph34r:
Just throwing ideas around, never thought finding a cool cutaway design was so difficult !

Image
Okay that last one looks sweet IMO, though I'd angle the bass side a bit more toward the bottom and the treble cutaway as well (so you can draw a diagonal line from where the bass side meets the neck to where the treble side does, if I'm making any sense).

Post Reply