Univox Limited Edition
Posted: Fri Jul 10, 2020 2:43 pm
Finished the pickguard and did a set-up on this pretty cool LP special copy from Univox.
![Image](https://i.imgur.com/cZR66Td.jpg)
It was missing the pickguard when I got it but had a shadowline where it had been, frets were in good shape but all the metal had green patina and the wraparound bridge had no intonation adjustments.
![Image](https://i.imgur.com/a5H4kPz.jpg)
I got an adjustable bridge from stew Mac that fit the existing post inserts, that made it easy to swap. Luckily I got the one without slots in the saddle because all the strings were a bit off center and the neck is glued and screwed under the front pickup, not so easy to shift.
![Image](https://i.imgur.com/tPbyGMR.jpg)
Decent original gotoh tuners and really sweet P90’s, this is a sleeper lawsuit era guitar. I have to rebuild the case next with new fittings but that shouldn’t be too difficult, it’s been a fun little rainy day project.
![Image](https://i.imgur.com/cZR66Td.jpg)
It was missing the pickguard when I got it but had a shadowline where it had been, frets were in good shape but all the metal had green patina and the wraparound bridge had no intonation adjustments.
![Image](https://i.imgur.com/a5H4kPz.jpg)
I got an adjustable bridge from stew Mac that fit the existing post inserts, that made it easy to swap. Luckily I got the one without slots in the saddle because all the strings were a bit off center and the neck is glued and screwed under the front pickup, not so easy to shift.
![Image](https://i.imgur.com/tPbyGMR.jpg)
Decent original gotoh tuners and really sweet P90’s, this is a sleeper lawsuit era guitar. I have to rebuild the case next with new fittings but that shouldn’t be too difficult, it’s been a fun little rainy day project.