Bringing your older offset back to life.
-
Ironheart
- PAT PEND
![PAT PEND PAT PEND](./images/ranks/star_pend.gif)
- Posts: 5
- Joined: Sun May 22, 2016 9:29 pm
Post
by Ironheart » Sat Jul 09, 2016 7:16 pm
I bought my Yamaha SG-3 a couple months ago and I still haven't been able to find a replacement saddle adjustment screw for the low E String. It's a slotted head style and its about half the size of a more modern Hex head saddle screw.
Anyone have a resource in finding a vintage or NOS replacement? Any specific measurements to find an exact replacement? I don't care if I have to replacement all, for them all to be the same. I just want it to be complete.
Any info/help would be great.
Thanks
Daniel
![Image](http://i12.photobucket.com/albums/a227/daniel_wheeler2/13659150_10157089791075510_1185861414019442626_n_zpsaqlqqzhj.jpg)
-
cbrown
- PAT. # 2.972.923
![PAT. # 2.972.923 PAT. # 2.972.923](./images/ranks/star_pat.gif)
- Posts: 1339
- Joined: Sun Apr 07, 2013 12:53 pm
- Location: Scotland
Post
by cbrown » Sat Jul 09, 2016 10:56 pm
Since it's Japanese, it's most likely to be metric. A standard Strat saddle height screw is 4-40 UNC thread which has an external diameter of 0.112" or ~2.85mm. The Yamaha screw is a wee bit smaller so will probably be an M2.5 thread.
These are probably perfect for you
http://m.ebay.ie/itm/M1-6-M2-M2-5-M3-A2 ... 0179951717" onclick="window.open(this.href);return false;
-
frelonvert
- PAT. # 2.972.923
![PAT. # 2.972.923 PAT. # 2.972.923](./images/ranks/star_pat.gif)
- Posts: 1713
- Joined: Thu May 13, 2010 1:21 am
- Location: Toulouse, France.
-
Contact:
Post
by frelonvert » Sun Jul 10, 2016 1:09 am
I believe Cbrown option is the best solution.
For my SG-2, I had a missing bridge saddle screw and I made one with a TOM saddle screw, cuting the top and making the "place" for the screw driver (don't know how to name it in english).
Take care the skons is evrywhere !
-
MattK
- PAT. # 2.972.923
![PAT. # 2.972.923 PAT. # 2.972.923](./images/ranks/star_pat.gif)
- Posts: 3710
- Joined: Sun Aug 10, 2008 9:51 pm
- Location: Hobart, Australia
Post
by MattK » Sun Jul 10, 2016 3:20 am
If you have a Dremel or similar tool, all you need to do is buy a stainless screw of the right metric diameter, machine or metal screw, with a flat tip not a point - take the saddle to the hardware store to (carefully) test if the thread fits. Then use the Dremel to cut a slot in the tip, to the right depth, and then cut the screw off at the right length.
-
Sonichris
- PAT. # 2.972.923
![PAT. # 2.972.923 PAT. # 2.972.923](./images/ranks/star_pat.gif)
- Posts: 968
- Joined: Sat Nov 04, 2006 3:56 pm
- Location: Wear gloves - I'm in the Rockies
Post
by Sonichris » Tue Jul 12, 2016 5:06 am
^^that's what I've done too. Many many times. Those screws are always missing it seems.
-
Artslap
- PAT. # 2.972.923
![PAT. # 2.972.923 PAT. # 2.972.923](./images/ranks/star_pat.gif)
- Posts: 87
- Joined: Sat May 30, 2015 6:54 pm
Post
by Artslap » Fri Jul 15, 2016 5:53 pm
Did you sort this out Ironheart?
I recently made one.
I'd be happy to do another if you are still in need.
CP.
"Curiosity killed the Cat. He's buried alongside all the great minds we never had." - P. Dempsy - SFK
-
Ironheart
- PAT PEND
![PAT PEND PAT PEND](./images/ranks/star_pend.gif)
- Posts: 5
- Joined: Sun May 22, 2016 9:29 pm
Post
by Ironheart » Tue Aug 09, 2016 2:00 pm
Artslap wrote:Did you sort this out Ironheart?
I recently made one.
I'd be happy to do another if you are still in need.
CP.
Hey Artslap. I actually just ordered a set of adjustment screws yesterday. Thank you very much though. Appreciate the help/consideration from you and everyone.