![Image](https://i.imgur.com/48jgw78.jpg)
![Image](https://i.imgur.com/CTdKcRZ.jpg)
![Image](https://i.imgur.com/N9H5vCR.jpg)
![Image](https://i.imgur.com/rAwT7uB.jpg)
And in goldtop gold
![Image](https://i.imgur.com/aSxjWD4.jpg)
![Image](https://i.imgur.com/tPjo56m.jpg)
![Image](https://i.imgur.com/s10DrnW.jpg)
I stupidly saved the little pickup mounting "rings" on the same layer as the binding so they had to be the same colour! In reality I'd probably lean towards doing these in 1-ply black. Other pickup options would be very simple to implement with the way I designed it - the pickup plane is basically flat on the body, then it gently carves down with a slight recurve all around the body.
It's mostly flat under the pickguard (where the screws are, at least, except for the bracket) but the pickguard overlaps slightly around the edge, hence the bracket, and slightly on the treble horn also. I think with 3 screws plus a bracket it shouldn't be too flimsy.
Anyway, all comments welcome and appreciated! Cheers
Dan