I got one of these funky toggles that has three outputs instead of the usual two. How do I wire it correctly? I put the neck and bridge in the normal outer two spots and ran the three outputs together but I end up with neckmid/neckmid/bridge.
Switchcraft Toggle Help
- HNB
- PAT. # 2.972.923
- Posts: 13539
- Joined: Tue May 10, 2011 7:55 am
- Location: Puyallup, Washington
- Contact:
Switchcraft Toggle Help
Last edited by HNB on Tue Jan 12, 2021 11:11 am, edited 1 time in total.
Christopher
Lilith Guitars
Lilith Guitars
- HNB
- PAT. # 2.972.923
- Posts: 13539
- Joined: Tue May 10, 2011 7:55 am
- Location: Puyallup, Washington
- Contact:
Re: Switchcraft Toggle Help
It looks like if I disconnect A1 but keep b1 and a2 together it should work as normal.
Christopher
Lilith Guitars
Lilith Guitars
- Shadoweclipse13
- PAT. # 2.972.923
- Posts: 12446
- Joined: Fri Feb 07, 2014 9:22 pm
- Location: Stuck in the dimension of imagination
Re: Switchcraft Toggle Help
Wow, I've never seen those before. I think a continuity check would solve it, but I have a feeling that I'd still be confused
Pickup Switching Mad Scientist
http://www.offsetguitars.com/forums/viewtopic.php?f=8&t=104282&p=1438384#p1438384
http://www.offsetguitars.com/forums/viewtopic.php?f=8&t=104282&p=1438384#p1438384
- timtam
- PAT. # 2.972.923
- Posts: 2739
- Joined: Sun Oct 22, 2017 2:42 am
- Location: Melbourne
Re: Switchcraft Toggle Help
That switch is for a 3 humbucker Les Paul.
https://guitarelectronics.com/switchcra ... ul-nickel/
https://guitarelectronics.com/switchcra ... ul-nickel/
"I just knew I wanted to make a sound that was the complete opposite of a Les Paul, and that’s pretty much a Jaguar." Rowland S. Howard.
- HNB
- PAT. # 2.972.923
- Posts: 13539
- Joined: Tue May 10, 2011 7:55 am
- Location: Puyallup, Washington
- Contact:
Re: Switchcraft Toggle Help
Yeah I was dumb and ordered a three way switchcraft right angle toggle and didn't pay enough attention to the picture. LOL
Christopher
Lilith Guitars
Lilith Guitars
- HNB
- PAT. # 2.972.923
- Posts: 13539
- Joined: Tue May 10, 2011 7:55 am
- Location: Puyallup, Washington
- Contact:
Re: Switchcraft Toggle Help
I was right. I disconnected that one and they work as it should. I will post a picture in case someone else gets one of these three leg output toggles by accident.
Christopher
Lilith Guitars
Lilith Guitars
- HNB
- PAT. # 2.972.923
- Posts: 13539
- Joined: Tue May 10, 2011 7:55 am
- Location: Puyallup, Washington
- Contact:
Re: Switchcraft Toggle Help
Here it is. That lower left guy needs to not be attached to have it function as a typical three way switch.
2021-01-12_09-37-14 by Christopher Louck, on Flickr
2021-01-12_09-37-14 by Christopher Louck, on Flickr
Christopher
Lilith Guitars
Lilith Guitars