Fender Traditional 60s Jaguar LBP with matching headstock

Discussion of newer designs, copies and reissue offset-waist instruments.
User avatar
MayTheFuzzBeWithYou
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 2696
Joined: Mon Jul 03, 2017 12:28 am
Location: Linz, Austria

Re: Fender Traditional 60s Jaguar LBP with matching headstock

Post by MayTheFuzzBeWithYou » Mon May 10, 2021 8:56 am

If I learned anything through the guitars by numbers thread besides cool new and old guitars... it‘s how to insert images! 😜
Image

It does look really cool! But I still prefer the IBM over LPB... has anyone played one of these yet?

User avatar
robroe
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 473
Joined: Thu Oct 05, 2006 8:53 pm
Location: Buffalo NY
Contact:

Re: Fender Traditional 60s Jaguar LBP with matching headstock

Post by robroe » Mon May 10, 2021 12:08 pm

Arc wrote:
Mon May 10, 2021 6:18 am
Are we really sure about the specs? It says 25,5” scale length.. that I find difficult to believe.
This is the first thing that jumped out at me.

Not good

User avatar
MayTheFuzzBeWithYou
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 2696
Joined: Mon Jul 03, 2017 12:28 am
Location: Linz, Austria

Re: Fender Traditional 60s Jaguar LBP with matching headstock

Post by MayTheFuzzBeWithYou » Mon May 10, 2021 12:13 pm

robroe wrote:
Mon May 10, 2021 12:08 pm
Arc wrote:
Mon May 10, 2021 6:18 am
Are we really sure about the specs? It says 25,5” scale length.. that I find difficult to believe.
This is the first thing that jumped out at me.

Not good
Honestly, that must have been a quotation-error by Thomann... if they‘d make a full scale Jaguar they‘d be marketing the shit out of it and wouldn‘t sell it as a 60s traditional Jaguar... 😉

User avatar
robroe
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 473
Joined: Thu Oct 05, 2006 8:53 pm
Location: Buffalo NY
Contact:

Re: Fender Traditional 60s Jaguar LBP with matching headstock

Post by robroe » Mon May 10, 2021 12:23 pm

MayTheFuzzBeWithYou wrote:
Mon May 10, 2021 12:13 pm
robroe wrote:
Mon May 10, 2021 12:08 pm
Arc wrote:
Mon May 10, 2021 6:18 am
Are we really sure about the specs? It says 25,5” scale length.. that I find difficult to believe.
This is the first thing that jumped out at me.

Not good
Honestly, that must have been a quotation-error by Thomann... if they‘d make a full scale Jaguar they‘d be marketing the shit out of it and wouldn‘t sell it as a 60s traditional Jaguar... 😉
Then the 40mm nut could be wrong. The 9.5 radius could be wrong. The U shaped neck....

A "traditional jaguar". Is 24", 42mm, 7.25ri with a C shape neck.

All the stuff in this description sounds like a telecaster neck, not a jaguar neck

User avatar
robroe
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 473
Joined: Thu Oct 05, 2006 8:53 pm
Location: Buffalo NY
Contact:

Re: Fender Traditional 60s Jaguar LBP with matching headstock

Post by robroe » Mon May 10, 2021 12:34 pm

robroe wrote:
Mon May 10, 2021 12:23 pm
MayTheFuzzBeWithYou wrote:
Mon May 10, 2021 12:13 pm
robroe wrote:
Mon May 10, 2021 12:08 pm


This is the first thing that jumped out at me.

Not good
Honestly, that must have been a quotation-error by Thomann... if they‘d make a full scale Jaguar they‘d be marketing the shit out of it and wouldn‘t sell it as a 60s traditional Jaguar... 😉
Then the 40mm nut could be wrong. The 9.5 radius could be wrong. The U shaped neck....

A "traditional jaguar". Is 24", 42mm, 7.25ri with a C shape neck.

All the stuff in this description sounds like a telecaster A neck that was never made before, not a jaguar neck

User avatar
soul1
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 504
Joined: Wed Apr 16, 2008 10:25 pm

Re: Fender Traditional 60s Jaguar LBP with matching headstock

Post by soul1 » Mon May 10, 2021 2:59 pm

Can anyone comment on the bridges used on these? Are they essentially the same as the recent 6-saddle MIM ones, or are they a bit better than those?

User avatar
krossfader
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 52
Joined: Sat Mar 04, 2017 7:43 pm

Re: Fender Traditional 60s Jaguar LBP with matching headstock

Post by krossfader » Mon May 10, 2021 3:52 pm

I'm a sucker for Lake Placid Blue, but this one looks a shade or two lighter to me. Those metallic Fender colors can be tricky to photograph, so maybe it's just the picture.

User avatar
Embenny
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 10363
Joined: Tue May 24, 2016 5:07 am

Re: Fender Traditional 60s Jaguar LBP with matching headstock

Post by Embenny » Mon May 10, 2021 5:57 pm

krossfader wrote:
Mon May 10, 2021 3:52 pm
I'm a sucker for Lake Placid Blue, but this one looks a shade or two lighter to me. Those metallic Fender colors can be tricky to photograph, so maybe it's just the picture.
It looks like Fender Japan's "OLB" (Old Lake Placid Blue), which is more into the turquoise range. I guess it's meant to look like LPB with a yellowed clear coat, though it's pretty distinct from that IMO.

This is a dead ringer for my '93-'94 MIJ Jag in OLB. Bought it around 2002. It was my first offset and remained somewhat of a unicorn finish-wise to this day, with the OLB and matching headstock.

I guess other people get to join in on the fun now.
The artist formerly known as mbene085.

User avatar
sunburster
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1112
Joined: Wed Aug 05, 2015 3:04 pm

Re: Fender Traditional 60s Jaguar LBP with matching headstock

Post by sunburster » Mon May 10, 2021 8:57 pm

robroe wrote:
Mon May 10, 2021 12:23 pm
MayTheFuzzBeWithYou wrote:
Mon May 10, 2021 12:13 pm
robroe wrote:
Mon May 10, 2021 12:08 pm


This is the first thing that jumped out at me.

Not good
Honestly, that must have been a quotation-error by Thomann... if they‘d make a full scale Jaguar they‘d be marketing the shit out of it and wouldn‘t sell it as a 60s traditional Jaguar... 😉
Then the 40mm nut could be wrong. The 9.5 radius could be wrong. The U shaped neck....

A "traditional jaguar". Is 24", 42mm, 7.25ri with a C shape neck.

All the stuff in this description sounds like a telecaster neck, not a jaguar neck
Telecaster necks don't have 40mm nuts.

I looked on Ishibashi for this model, as they always have the correct specs. Everything is as described before except for the scale length, which is obviously a typo on Thomann. 40mm nut width, 9.5" radius, Basswood body, U shape neck are all correct.

Image

https://www.ishibashi.co.jp/ec/product/0885978483297

User avatar
Maggieo
Expat
Expat
Posts: 13473
Joined: Mon Oct 02, 2006 10:36 am
Location: Nebraska, USA
Contact:

Re: Fender Traditional 60s Jaguar LBP with matching headstock

Post by Maggieo » Tue May 11, 2021 9:17 am

sunburster wrote:
Sun May 09, 2021 7:25 pm
Basswood is too soft. It dents too easily. That's what I hate about it.

And do any of you have a guitar with a 40mm nut width (Standard Fender size is 42mm)? I find that unplayable near the nut. It's like an A neck from the 60s.
With a poly finish, that doesn't matter.
“Now I am quietly waiting for/ the catastrophe of my personality/ to seem beautiful again.”- Frank O'Hara
I am not an attorney and this post is for entertainment purposes only. Please consult a licensed attorney in your state for legal advice.

User avatar
soul1
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 504
Joined: Wed Apr 16, 2008 10:25 pm

Re: Fender Traditional 60s Jaguar LBP with matching headstock

Post by soul1 » Tue May 11, 2021 11:24 am

When I add one to my cart and go to checkout, it says it won't ship to North America >:(

We are quite disappointed with Fender for preventing us from shipping to your country of choice. Please consider products of a different manufacturer or switch to another delivery country.

User avatar
Embenny
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 10363
Joined: Tue May 24, 2016 5:07 am

Re: Fender Traditional 60s Jaguar LBP with matching headstock

Post by Embenny » Tue May 11, 2021 11:38 am

Maggieo wrote:
Tue May 11, 2021 9:17 am
sunburster wrote:
Sun May 09, 2021 7:25 pm
Basswood is too soft. It dents too easily. That's what I hate about it.

And do any of you have a guitar with a 40mm nut width (Standard Fender size is 42mm)? I find that unplayable near the nut. It's like an A neck from the 60s.
With a poly finish, that doesn't matter.
This is exactly what I always hear people say (about dents), and exactly what my experience has been (that the poly finish is a far bigger part of dent resistance than the wood species).

My alder nitro guitars have dinged up way more than any of my poly guitars over the years, be they basswood, alder, poplar, or mahogany.

I've owned multiple Japanese Fenders, and those finishes are damn near bulletproof. The only ding I ever put in my MIJ Jag, the one that looks exactly like this model and is allegedly basswood too, was from ramming the corner of an 80lb bass cab into it while loading my band's van when I was 18 and had it in a thin gig bag.

That's literally the only mark I put on it in the last 18 years I've owned it, and it's about 1/4" wide. It only has one other ding, which it acquired some time in the 8 years before it came to me.

I wouldn't worry about the basswood being soft under that Fender Japan poly. I've smacked basswood MIJs against more objects than I can count over the years and they hold up better than just about anything. It's a nice-sounding wood and saves a bit of weight, which is more than welcome on a jag. My MIJ Jag is my lightest one, which isn't to say it's as light as a Mustang or something, but it's certainly less of a backbreaker than some of my other Jags.

I actually had a basswood purple MIJ Mascis that came to me with a massive ding, and I always wondered how the hell someone even managed that. I smacked that thing against walls, mic stands, amps...and never dented the finish. I feel like they had to have knocked an amp head off a cab onto it or something.

When I got my first nitro Fender, I marked it up inside of a week, and made me realize that the years of playing my basswood MIJ Jag as my main and only guitar had spoiled me.
The artist formerly known as mbene085.

User avatar
snarf
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 172
Joined: Sun Jun 14, 2020 7:04 am

Re: Fender Traditional 60s Jaguar LBP with matching headstock

Post by snarf » Tue May 11, 2021 12:02 pm

I got one a few months ago and swapped all the parts and put gold parts on it. I had a gold mastery kit and a bunch of gold control plates originally for a blonde jaguar I was putting together but decided to ditch that project because I ended up picking up a very clean limited japan blonde jaguar with gold hardware

Image

The original hardware was pretty good actually. I know most people don't like gold hardware so I don't share it a whole lot. It's a great guitar though. It's light weight and the neck is perfect for me.

User avatar
sunburster
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 1112
Joined: Wed Aug 05, 2015 3:04 pm

Re: Fender Traditional 60s Jaguar LBP with matching headstock

Post by sunburster » Tue May 11, 2021 12:05 pm

Maggieo wrote:
Tue May 11, 2021 9:17 am
sunburster wrote:
Sun May 09, 2021 7:25 pm
Basswood is too soft. It dents too easily. That's what I hate about it.

And do any of you have a guitar with a 40mm nut width (Standard Fender size is 42mm)? I find that unplayable near the nut. It's like an A neck from the 60s.
With a poly finish, that doesn't matter.
In my experience, it does. I had a few Basswood poly finish guitars years ago and they would dent just by looking at them. Big difference compared to the Alder poly finish guitars I had.

Maybe I just had bad luck, but after that I won't buy another Basswood guitar.

User avatar
timiscott
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 422
Joined: Thu Jan 25, 2018 12:38 am
Location: London

Re: Fender Traditional 60s Jaguar LBP with matching headstock

Post by timiscott » Tue May 11, 2021 12:30 pm

Question for Snarf: is it actually LPB like the Marr or Classic 60s Jags, or is it lighter and more turquoise in the flesh?

Post Reply