I am sure he has explained the Percolator is only on some parts of some songs. Not sure what other pedals used, just amp? Metal guitar, metal picks, putting mics a foot away directly at the cone- yes i used to use a brass pick a d got a kind of sound like that but slowly backed it off to extend the life of my strings!fuzzjunkie wrote: ↑Mon Mar 29, 2021 5:48 pmThanks for the review. Yeah, single coils and Bassman are my jam. No copper picks though I did try a six pence for a bit.s_mcsleazy wrote: ↑Mon Mar 29, 2021 11:01 ami've built a few in the past and loved them. what i've found about them is their kinda like the mosrite fuzzrite in they need a recovery stage or you'll have to really crank the volume.fuzzjunkie wrote: ↑Mon Mar 29, 2021 9:34 am
Have you finished the Harmonic Percolator, Sean?
I have wondered about that pedal for a while, one of the few I haven’t at least tried. I only know it by reputation and video demos.
the ones in the past i've built have been really fun but imho, they're not as big a part to the shellac/big black guitar sound as people think. like it's kinda the last 15% of that sound but you wanna get closest without one, run a jmp/bassman with a single coil guitar and copper guitar picks. it will get you mostly there.
Re: The D.I.Y. thread.
- jorri
- PAT. # 2.972.923
- Posts: 3048
- Joined: Thu May 07, 2009 1:53 am
- Location: bath, UK
- Contact:
Re: The D.I.Y. thread.
- s_mcsleazy
- PAT. # 2.972.923
- Posts: 18494
- Joined: Thu Jul 28, 2011 7:30 am
- Location: glasgow
Re: The D.I.Y. thread.
the only other pedal ive known him to use is a noise gatejorri wrote: ↑Wed Apr 07, 2021 10:52 am
I am sure he has explained the Percolator is only on some parts of some songs. Not sure what other pedals used, just amp? Metal guitar, metal picks, putting mics a foot away directly at the cone- yes i used to use a brass pick a d got a kind of sound like that but slowly backed it off to extend the life of my strings!
offset guitars resident bass player.
'Are you trying to seduce me Mrs Robinson? Or do you just want me to solder a couple of resistors into your Muff?'
'Are you trying to seduce me Mrs Robinson? Or do you just want me to solder a couple of resistors into your Muff?'
- SadFuzz
- PAT. # 2.972.923
- Posts: 468
- Joined: Sun Oct 22, 2017 12:12 pm
- Location: Scotland
Re: The D.I.Y. thread.
Steve's rig is very minimal, think he said in an old guitar mag he used an old mxr delay unit live occassionaly, and you can deffo hear a harmonizer or something on the hook to passing complexion. But most of his sound is just guitar, amp and the weird picks.
icerinkband.bandcamp.com
- mackerelmint
- PAT. # 2.972.923
- Posts: 13674
- Joined: Sun May 05, 2013 9:51 pm
- Location: トイレ国、ウンチ市
Re: The D.I.Y. thread.
I've got a question for you guys, and though it's not really pedal related, it seems like this is as good a thread to pose this question in as any:
Anyone know about DIYing an analog drum brain?
I think I'd like to put one together, with a few voices. Bass, snare, a tom or two and a basic hi hat kind of thing. I've found the 808 kick drum circuit, so that'd be neat, it's simple enough on its own. I've found a lot of arduino-based stuff, and digital stuff, and "oh, here's a whole drum machine!" kind of stuff, but I'm not getting too far. Look mum no computer's got a nice bit about a crappy DIY drum machine from a 70s electronics magazine and so far that's the best info I've found, to be honest. I'm just looking for a few simple parameters per voice cheesy rhythm box from an old organ sound kind of deal, that I could trigger externally. Any pointing in the right direction is appreciated.
Anyone know about DIYing an analog drum brain?
I think I'd like to put one together, with a few voices. Bass, snare, a tom or two and a basic hi hat kind of thing. I've found the 808 kick drum circuit, so that'd be neat, it's simple enough on its own. I've found a lot of arduino-based stuff, and digital stuff, and "oh, here's a whole drum machine!" kind of stuff, but I'm not getting too far. Look mum no computer's got a nice bit about a crappy DIY drum machine from a 70s electronics magazine and so far that's the best info I've found, to be honest. I'm just looking for a few simple parameters per voice cheesy rhythm box from an old organ sound kind of deal, that I could trigger externally. Any pointing in the right direction is appreciated.
This is an excellent rectangle
- Shadoweclipse13
- PAT. # 2.972.923
- Posts: 12497
- Joined: Fri Feb 07, 2014 9:22 pm
- Location: Stuck in the dimension of imagination
Re: The D.I.Y. thread.
I have a feeling that it's not the direction you'd want to go (possibly expensive and might still need a drum pad controller), but have you ever looked into Eurorack modular synths? There are makers who make drum modules, and I've always thought it would be really cool to get exactly the kick drum module, snare module, etc., to really fine tune the exact sound you want.mackerelmint wrote: ↑Mon May 10, 2021 11:53 pmI've got a question for you guys, and though it's not really pedal related, it seems like this is as good a thread to pose this question in as any:
Anyone know about DIYing an analog drum brain?
I think I'd like to put one together, with a few voices. Bass, snare, a tom or two and a basic hi hat kind of thing. I've found the 808 kick drum circuit, so that'd be neat, it's simple enough on its own. I've found a lot of arduino-based stuff, and digital stuff, and "oh, here's a whole drum machine!" kind of stuff, but I'm not getting too far. Look mum no computer's got a nice bit about a crappy DIY drum machine from a 70s electronics magazine and so far that's the best info I've found, to be honest. I'm just looking for a few simple parameters per voice cheesy rhythm box from an old organ sound kind of deal, that I could trigger externally. Any pointing in the right direction is appreciated.
Pickup Switching Mad Scientist
http://www.offsetguitars.com/forums/viewtopic.php?f=8&t=104282&p=1438384#p1438384
http://www.offsetguitars.com/forums/viewtopic.php?f=8&t=104282&p=1438384#p1438384
- mackerelmint
- PAT. # 2.972.923
- Posts: 13674
- Joined: Sun May 05, 2013 9:51 pm
- Location: トイレ国、ウンチ市
Re: The D.I.Y. thread.
Well, it would still need something to drive the inputs, which isn't a problem. Eurorack is a whole thing, and I'm not super worried about tweaking each voice, I'm more in it for the sake of learning to make trashy sounding circuits and stuffing them into a crappy box and making it do something garbagy and weird. There's this really nice analog drum thing that Vermona makes, as well as various others made throughout the years, but I'm after low budget low fi low brow shit machine drums.Shadoweclipse13 wrote: ↑Tue May 11, 2021 1:12 amI have a feeling that it's not the direction you'd want to go (possibly expensive and might still need a drum pad controller), but have you ever looked into Eurorack modular synths? There are makers who make drum modules, and I've always thought it would be really cool to get exactly the kick drum module, snare module, etc., to really fine tune the exact sound you want.mackerelmint wrote: ↑Mon May 10, 2021 11:53 pmI've got a question for you guys, and though it's not really pedal related, it seems like this is as good a thread to pose this question in as any:
Anyone know about DIYing an analog drum brain?
I think I'd like to put one together, with a few voices. Bass, snare, a tom or two and a basic hi hat kind of thing. I've found the 808 kick drum circuit, so that'd be neat, it's simple enough on its own. I've found a lot of arduino-based stuff, and digital stuff, and "oh, here's a whole drum machine!" kind of stuff, but I'm not getting too far. Look mum no computer's got a nice bit about a crappy DIY drum machine from a 70s electronics magazine and so far that's the best info I've found, to be honest. I'm just looking for a few simple parameters per voice cheesy rhythm box from an old organ sound kind of deal, that I could trigger externally. Any pointing in the right direction is appreciated.
This is an excellent rectangle
- Shadoweclipse13
- PAT. # 2.972.923
- Posts: 12497
- Joined: Fri Feb 07, 2014 9:22 pm
- Location: Stuck in the dimension of imagination
Re: The D.I.Y. thread.
I dig that. Like an Atari-punk console but as a drum machine?mackerelmint wrote: ↑Tue May 11, 2021 4:18 pmWell, it would still need something to drive the inputs, which isn't a problem. Eurorack is a whole thing, and I'm not super worried about tweaking each voice, I'm more in it for the sake of learning to make trashy sounding circuits and stuffing them into a crappy box and making it do something garbagy and weird. There's this really nice analog drum thing that Vermona makes, as well as various others made throughout the years, but I'm after low budget low fi low brow shit machine drums.Shadoweclipse13 wrote: ↑Tue May 11, 2021 1:12 amI have a feeling that it's not the direction you'd want to go (possibly expensive and might still need a drum pad controller), but have you ever looked into Eurorack modular synths? There are makers who make drum modules, and I've always thought it would be really cool to get exactly the kick drum module, snare module, etc., to really fine tune the exact sound you want.mackerelmint wrote: ↑Mon May 10, 2021 11:53 pmI've got a question for you guys, and though it's not really pedal related, it seems like this is as good a thread to pose this question in as any:
Anyone know about DIYing an analog drum brain?
I think I'd like to put one together, with a few voices. Bass, snare, a tom or two and a basic hi hat kind of thing. I've found the 808 kick drum circuit, so that'd be neat, it's simple enough on its own. I've found a lot of arduino-based stuff, and digital stuff, and "oh, here's a whole drum machine!" kind of stuff, but I'm not getting too far. Look mum no computer's got a nice bit about a crappy DIY drum machine from a 70s electronics magazine and so far that's the best info I've found, to be honest. I'm just looking for a few simple parameters per voice cheesy rhythm box from an old organ sound kind of deal, that I could trigger externally. Any pointing in the right direction is appreciated.
Pickup Switching Mad Scientist
http://www.offsetguitars.com/forums/viewtopic.php?f=8&t=104282&p=1438384#p1438384
http://www.offsetguitars.com/forums/viewtopic.php?f=8&t=104282&p=1438384#p1438384
- mackerelmint
- PAT. # 2.972.923
- Posts: 13674
- Joined: Sun May 05, 2013 9:51 pm
- Location: トイレ国、ウンチ市
Re: The D.I.Y. thread.
Yeah, sorta. Craptastic sounds triggered by external sources, but lo fi crunch goblin/ 70s organ rhythm section kind of sounds. I love the rhythm boxes in old organs, my grandparents had a hammond transistor organ with the built in rhythms and to this day it's one of the grooviest, smoothest flowing drum machines I've ever heard. That thing and the roland TR 606.Shadoweclipse13 wrote: ↑Thu May 13, 2021 9:22 amI dig that. Like an Atari-punk console but as a drum machine?mackerelmint wrote: ↑Tue May 11, 2021 4:18 pmWell, it would still need something to drive the inputs, which isn't a problem. Eurorack is a whole thing, and I'm not super worried about tweaking each voice, I'm more in it for the sake of learning to make trashy sounding circuits and stuffing them into a crappy box and making it do something garbagy and weird. There's this really nice analog drum thing that Vermona makes, as well as various others made throughout the years, but I'm after low budget low fi low brow shit machine drums.Shadoweclipse13 wrote: ↑Tue May 11, 2021 1:12 am
I have a feeling that it's not the direction you'd want to go (possibly expensive and might still need a drum pad controller), but have you ever looked into Eurorack modular synths? There are makers who make drum modules, and I've always thought it would be really cool to get exactly the kick drum module, snare module, etc., to really fine tune the exact sound you want.
This is an excellent rectangle
- Shadoweclipse13
- PAT. # 2.972.923
- Posts: 12497
- Joined: Fri Feb 07, 2014 9:22 pm
- Location: Stuck in the dimension of imagination
Re: The D.I.Y. thread.
That is a fantastic description. Whenever you figure out what you want/to build, please post some audio of the machine!!mackerelmint wrote: ↑Thu May 13, 2021 9:29 pmYeah, sorta. Craptastic sounds triggered by external sources, but lo fi crunch goblin/ 70s organ rhythm section kind of sounds. I love the rhythm boxes in old organs, my grandparents had a hammond transistor organ with the built in rhythms and to this day it's one of the grooviest, smoothest flowing drum machines I've ever heard. That thing and the roland TR 606.Shadoweclipse13 wrote: ↑Thu May 13, 2021 9:22 amI dig that. Like an Atari-punk console but as a drum machine?mackerelmint wrote: ↑Tue May 11, 2021 4:18 pm
Well, it would still need something to drive the inputs, which isn't a problem. Eurorack is a whole thing, and I'm not super worried about tweaking each voice, I'm more in it for the sake of learning to make trashy sounding circuits and stuffing them into a crappy box and making it do something garbagy and weird. There's this really nice analog drum thing that Vermona makes, as well as various others made throughout the years, but I'm after low budget low fi low brow shit machine drums.
Pickup Switching Mad Scientist
http://www.offsetguitars.com/forums/viewtopic.php?f=8&t=104282&p=1438384#p1438384
http://www.offsetguitars.com/forums/viewtopic.php?f=8&t=104282&p=1438384#p1438384
- mackerelmint
- PAT. # 2.972.923
- Posts: 13674
- Joined: Sun May 05, 2013 9:51 pm
- Location: トイレ国、ウンチ市
Re: The D.I.Y. thread.
OK!Shadoweclipse13 wrote: ↑Mon May 17, 2021 5:30 amThat is a fantastic description. Whenever you figure out what you want/to build, please post some audio of the machine!!mackerelmint wrote: ↑Thu May 13, 2021 9:29 pmYeah, sorta. Craptastic sounds triggered by external sources, but lo fi crunch goblin/ 70s organ rhythm section kind of sounds. I love the rhythm boxes in old organs, my grandparents had a hammond transistor organ with the built in rhythms and to this day it's one of the grooviest, smoothest flowing drum machines I've ever heard. That thing and the roland TR 606.Shadoweclipse13 wrote: ↑Thu May 13, 2021 9:22 am
I dig that. Like an Atari-punk console but as a drum machine?
Meanwhile, I built most of an EQD arrows pedal today. Thought I had a capacitor I don't have, but I will soon enough. I was given the board as a freebie, and it turned out to be a pedal I think will be useful. I think I've mentioned the company here on the board before, but I will again, just because I've been so impressed. Hammond tone works, selling on reverb. Good PCBs at good prices, with top notch build instructions. Shane's a real nice guy, just wants to be a resource. He's in it for all the right reasons and deserves some love.
This is an excellent rectangle
- i love sharin foo
- Mods
- Posts: 5684
- Joined: Tue Sep 12, 2006 8:26 am
- Location: Pittsburgh, PA
- Contact:
Re: The D.I.Y. thread.
These are the most recent things that I've built. It's a modified Dan Armstrong Green Ringer with buffered wet/ dry mix, more gain, more volume, and a gnarlier octave. I'm really pleased with the turnout.
This isn’t some kind of metaphor
Goddamn this is real
Goddamn this is real
- MarkN
- PAT PEND
- Posts: 13
- Joined: Fri May 08, 2015 5:26 pm
Re: The D.I.Y. thread.
Try looking up Lunetta synths. They use 4000 series chips and are weird/trashy/cool. I did a quick google and it looks like stuff came up for Lunetta drum sounds. Good luck. Please post if you build something.mackerelmint wrote: ↑Tue May 11, 2021 4:18 pmI'm more in it for the sake of learning to make trashy sounding circuits and stuffing them into a crappy box and making it do something garbagy and weird. There's this really nice analog drum thing that Vermona makes, as well as various others made throughout the years, but I'm after low budget low fi low brow shit machine drums.
- s_mcsleazy
- PAT. # 2.972.923
- Posts: 18494
- Joined: Thu Jul 28, 2011 7:30 am
- Location: glasgow
Re: The D.I.Y. thread.
yo, got a quick question. switches aren't my specialty so i figured i'd ask here.
i use 2 amps. my twin and my bassman, i'm currently using an A/B/Y box but i dislike it because i always forget which amp i leave on before i engage the Y and i'd rather just have a 2 footswitch box where each footswitch sends/cuts the signal to each amp. how would one wire that up? i feel it might be pretty simple but still.
i use 2 amps. my twin and my bassman, i'm currently using an A/B/Y box but i dislike it because i always forget which amp i leave on before i engage the Y and i'd rather just have a 2 footswitch box where each footswitch sends/cuts the signal to each amp. how would one wire that up? i feel it might be pretty simple but still.
offset guitars resident bass player.
'Are you trying to seduce me Mrs Robinson? Or do you just want me to solder a couple of resistors into your Muff?'
'Are you trying to seduce me Mrs Robinson? Or do you just want me to solder a couple of resistors into your Muff?'
- mackerelmint
- PAT. # 2.972.923
- Posts: 13674
- Joined: Sun May 05, 2013 9:51 pm
- Location: トイレ国、ウンチ市
Re: The D.I.Y. thread.
Good tip, thanks!MarkN wrote: ↑Sat Jul 03, 2021 6:58 pmTry looking up Lunetta synths. They use 4000 series chips and are weird/trashy/cool. I did a quick google and it looks like stuff came up for Lunetta drum sounds. Good luck. Please post if you build something.mackerelmint wrote: ↑Tue May 11, 2021 4:18 pmI'm more in it for the sake of learning to make trashy sounding circuits and stuffing them into a crappy box and making it do something garbagy and weird. There's this really nice analog drum thing that Vermona makes, as well as various others made throughout the years, but I'm after low budget low fi low brow shit machine drums.
This is an excellent rectangle
- mackerelmint
- PAT. # 2.972.923
- Posts: 13674
- Joined: Sun May 05, 2013 9:51 pm
- Location: トイレ国、ウンチ市
Re: The D.I.Y. thread.
Well, you'd have your input, and from there you'd have two lines coming from it. One to each switch. Each switch goes to an output. SPST stomp switches would work, I think. Just two switches and three jacks, leads and grounds. I think.s_mcsleazy wrote: ↑Thu Jul 22, 2021 2:46 pmyo, got a quick question. switches aren't my specialty so i figured i'd ask here.
i use 2 amps. my twin and my bassman, i'm currently using an A/B/Y box but i dislike it because i always forget which amp i leave on before i engage the Y and i'd rather just have a 2 footswitch box where each footswitch sends/cuts the signal to each amp. how would one wire that up? i feel it might be pretty simple but still.
This is an excellent rectangle