testing for nitro

Bringing your older offset back to life.
Post Reply
User avatar
rabidhamster
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 263
Joined: Wed Oct 25, 2006 9:44 pm

testing for nitro

Post by rabidhamster » Thu Oct 26, 2006 9:04 pm

I know I should know this by now, but does anyone know how to test a finish to determine whether its nitro or not?  Im very happy with the color of my new guitar, but if its a poly finish, especially on the neck, I'm gonna have to plan on stripping it and redoing it.  The only thing I know of is setting it on a non-nitro safe stand and see if it burns the finish but...well....stand burns arent my kind of relicing:)

User avatar
jrkirkish
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 91
Joined: Fri Oct 20, 2006 3:41 am

Re: testing for nitro

Post by jrkirkish » Thu Oct 26, 2006 10:44 pm

If it's a new guitar, I'd bet poly.

What make/model is it?

And new guitar? you gotta post pics! :D

User avatar
Marc
Expat
Expat
Posts: 1181
Joined: Sat Sep 23, 2006 11:25 pm
Location: South West UK

Re: testing for nitro

Post by Marc » Thu Oct 26, 2006 11:37 pm

set alight to it!

If it burns the house down it's nitro.
Yes the cat has opposing thumbs and extra digits.

User avatar
rabidhamster
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 263
Joined: Wed Oct 25, 2006 9:44 pm

Re: testing for nitro

Post by rabidhamster » Fri Oct 27, 2006 5:47 am

well, what I meant was new to me.  Its actually a JM, all 1963 except the neck, which is a 1960 date.  I've posted the pic I found on the net in another thread, but I dont know of any harm reposting.  The  guitar was kind enough to go out to the arlington guitar show so it  could be photographed for me, but then not let itself get sold before I got to it ;)
http://flickr.com/photos/onetwoxu/27579 ... 339042942/
:D

Also, when I say "my" new guitar, I should note that its a bit expensive for me, so Im still paying on the layaway :'(  Its killin me!!  I should have it out just in time for christmas though!

User avatar
flatfiver
Expat
Expat
Posts: 1367
Joined: Mon Oct 02, 2006 7:59 pm
Location: WI

Re: testing for nitro

Post by flatfiver » Fri Oct 27, 2006 4:52 pm

If you put a drop of acetone on a nitro finish it will bubble or wrinkle or something like that.  If you put acetone on poly it sits there and then you wipe it off.  You'd probably want to try this in an out-of-the-way place on the guitar.
Zen & the Art of Jazzmaster Maintenance

User avatar
aen
Expat
Expat
Posts: 3152
Joined: Wed Oct 04, 2006 12:48 pm
Location: Wisconsin
Contact:

Re: testing for nitro

Post by aen » Fri Oct 27, 2006 7:12 pm

No, no, you just put it under water.  If bubbles come up it's nitro, cause the body can "BREATHE" but if no bubles come up it's poly, adn the wood has already choked to death.
I prefer their older stuff.

User avatar
rabidhamster
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 263
Joined: Wed Oct 25, 2006 9:44 pm

Re: testing for nitro

Post by rabidhamster » Fri Oct 27, 2006 9:39 pm

hahahahahahahhahahaa!!!  I hope I havent gotten a dead guitar!

Thanks for the acetone tip, I'll give that a shot someplace under the pickguard.  :)

User avatar
fullerplast
Mods
Mods
Posts: 12710
Joined: Tue Sep 12, 2006 4:53 am
Location: In My Room

Re: testing for nitro

Post by fullerplast » Sat Oct 28, 2006 3:14 am

No, no, you just put it under water.  If bubbles come up it's nitro, cause the body can "BREATHE" but if no bubles come up it's poly, adn the wood has already choked to death.


;D
Q. Are we not men?

User avatar
Blobcaster
PAT. # 2.972.923
PAT. # 2.972.923
Posts: 265
Joined: Wed Nov 08, 2006 11:13 pm

Re: testing for nitro

Post by Blobcaster » Wed Nov 08, 2006 11:18 pm

rub the finish with your thumb vigorusly until it heats up,sweet smell = nitro,no smell = poly.try it under the guard.

Post Reply