Hi, OK. I'm sorry if I hurted anyone.
I will start a thread tomorrow
I posted and talk here only coz I would never start my project without them... That's all.
Hi, OK. I'm sorry if I hurted anyone.
No worries, I think this will make the threads less confusing for everyone.Speedo wrote: ↑Wed Nov 02, 2022 4:50 pmHi, OK. I'm sorry if I hurted anyone.
I will start a thread tomorrow
I posted and talk here only coz I would never start my project without them... That's all.
Hi, i started here : viewtopic.php?f=8&t=123967Telliot wrote: ↑Wed Nov 02, 2022 5:24 pmNo worries, I think this will make the threads less confusing for everyone.
Thank you for your understanding.
Check these pages:inkeye wrote: ↑Mon Jul 10, 2023 11:31 amI've been going through this thread but I think I missed what the specs were for the production Jag-stang neck. I haven't owned a Jag-stang but I do have a version of the Jag-stang Done Right. I'm hoping to replace the neck I used at some point with something more accurate.
Also, as a side note: Musikraft can make a Jaguar neck with a small Strat headstock as an option. I'm not sure what profile and radius specs would be the closest to the original Jenner/Cobain Jaguar D&B neck.
Amon 7.L wrote: ↑Mon Jul 10, 2023 12:18 pmCheck these pages:inkeye wrote: ↑Mon Jul 10, 2023 11:31 amI've been going through this thread but I think I missed what the specs were for the production Jag-stang neck. I haven't owned a Jag-stang but I do have a version of the Jag-stang Done Right. I'm hoping to replace the neck I used at some point with something more accurate.
Also, as a side note: Musikraft can make a Jaguar neck with a small Strat headstock as an option. I'm not sure what profile and radius specs would be the closest to the original Jenner/Cobain Jaguar D&B neck.
viewtopic.php?f=8&t=112241&start=465#p1671425
viewtopic.php?f=8&t=112241&start=480#p1671616
I'm not sure if this has been referenced elsewhere in the thread since there's a lot in here, but the digit before the color code indicates whether a case is included and if it's a hardshell case or gig bag. "3" indicates a gig bag, "5" indicates no case at all, and "7" indicates a hardshell case.Amon 7.L wrote: ↑Wed Apr 21, 2021 12:03 pmDue to the fact that the goal was to sort out the aqua/sonic blue colour variance, in regards to those spec sheets I’ve furtherly asked:
“I’d like to ask you one last question if you don’t mind. It’s just out of curiosity.
I noticed that on the specs of the JAG-STANG, the color reference for the fiesta red and sonic blue are different. Are they different shades?
I tried to look’em up in your color chart but it only goes up to number 99.
1995 JAG-STANG has these:
(540) Fiesta Red,
(572) Sonic Blue
2003 JAG-STANG has these:
(340) Fiesta Red,
(372) Sonic Blue.
Can I kindly ask you some insight on those numbers? Does it indicates different batches of paint to separate the first run from the Reissue?
Is there a hex code you can direct me to tell them apart?”
Well, the Jenner/Cobain Jaguar is an interesting connundrum. I wasn't initially going to discuss this openly but I feel like I need to.inkeye wrote: ↑Mon Jul 10, 2023 11:31 amI've been going through this thread but I think I missed what the specs were for the production Jag-stang neck. I haven't owned a Jag-stang but I do have a version of the Jag-stang Done Right. I'm hoping to replace the neck I used at some point with something more accurate.
Also, as a side note: Musikraft can make a Jaguar neck with a small Strat headstock as an option. I'm not sure what profile and radius specs would be the closest to the original Jenner/Cobain Jaguar D&B neck.
Ever run into a guy named Daniel Dean Sullivan on the Facebook groups that talks some of that garbage you mention about the Jag-Stang?
Good to know! Note: if you are striving for accuracy, it isn't as easy as ordering a strat headstock. Since the headstock shape was cut down from an original CBS jaguar headstock, the end results lies between a CBS Jaguar and small Strat shape. I was working on a headstock template for a while but haven't finished it quite yet.
I haven't but I'm not surprised they are around. Since this thread, I still see people every day spewing the same old information. But you lnow what else I see? People who have read this thread combating that misinformation. Honestly, it gives me hope.
I may even have the thickness around here somewhere, but it's buried under a mountain of research. I gave them to Amon years ago. If he feels like sharing, I'll let him. But yeah, I agree. I can absolutely see why Norvell thought it was a Fender neck because, well, technically it is. And it's not out of the realm of possibility for an experience luthier to replicate Fender style binding or anything else. People do it all the time.FenderBob wrote: ↑Tue Jul 11, 2023 9:15 amAcrylicSuperman, thank you for posting the information you do have a on the Cobain Jaguar Neck. Very interesting stuff. It would make sense to me that Justin Norvell (of Fender) would have been fooled into thinking the neck was all original based on the original maple markings being still in tact.