modifying a turntable for UK voltage (from US)?
- noisepunk
- PAT. # 2.972.923
- Posts: 16807
- Joined: Sat Apr 03, 2010 5:55 pm
- Location: glasgow, scotland
- Contact:
modifying a turntable for UK voltage (from US)?
hopefully this is a good section for this:
okay, so the short of it is that i'm moving to scotland in the next couple months and trying to weigh bringing my turntable with me (i still have to determine how much i'll be able to ship...so this idea might be killed from that angle too ), or selling it and trying to find something comparable.
it's a pioneer pl-518. nothing super special, but it's pretty solid direct-drive unit with a few cool features, that i think were somewhat unique when it came out. aside from being all i'd ever want or need, it's also the only turntable i've ever owned and i'm pretty attached to it, so selling it off might hurt a little. the other issue is that i'm concerned i won't be able to get anything comparable for what they sell for: anywhere from $250-500 (seems like i'd be able to get $350 for mine pretty easy, anything higher might be a bit of a stretch).
–––
that's the preamble, but all of it will be pretty much moot if i can't modify it for UK mains. i know it's possible– buying vintage US turntables seems to be a bit in vogue at the moment, probably because we have a surplus of good ones, and our local hipsters are generally more keen on something new– but i haven't seen much in the way of tutorials, etc.
as always, any kind help is appreciated.
thanks!
okay, so the short of it is that i'm moving to scotland in the next couple months and trying to weigh bringing my turntable with me (i still have to determine how much i'll be able to ship...so this idea might be killed from that angle too ), or selling it and trying to find something comparable.
it's a pioneer pl-518. nothing super special, but it's pretty solid direct-drive unit with a few cool features, that i think were somewhat unique when it came out. aside from being all i'd ever want or need, it's also the only turntable i've ever owned and i'm pretty attached to it, so selling it off might hurt a little. the other issue is that i'm concerned i won't be able to get anything comparable for what they sell for: anywhere from $250-500 (seems like i'd be able to get $350 for mine pretty easy, anything higher might be a bit of a stretch).
–––
that's the preamble, but all of it will be pretty much moot if i can't modify it for UK mains. i know it's possible– buying vintage US turntables seems to be a bit in vogue at the moment, probably because we have a surplus of good ones, and our local hipsters are generally more keen on something new– but i haven't seen much in the way of tutorials, etc.
as always, any kind help is appreciated.
thanks!
- zhivago
- Mods
- Posts: 22045
- Joined: Tue Sep 12, 2006 6:18 am
- Location: London, UK
Re: modifying a turntable for UK voltage (from US)?
You could buy a step-down transformer and plug into that, instead of modifying the turntable.
I did that with vintage Fender amps I had in the past that were for 110V usage.
I had something like this in the past:
https://www.amazon.co.uk/240v-110v-Step ... B000NIYH94
I did that with vintage Fender amps I had in the past that were for 110V usage.
I had something like this in the past:
https://www.amazon.co.uk/240v-110v-Step ... B000NIYH94
Resident Spartan.
- noisepunk
- PAT. # 2.972.923
- Posts: 16807
- Joined: Sat Apr 03, 2010 5:55 pm
- Location: glasgow, scotland
- Contact:
Re: modifying a turntable for UK voltage (from US)?
oh, they're cheaper than i thought– i'm going to try and bring my princeton over too and was going to get one for that... i guess i could get more than one.
- 1452L
- PAT PEND
- Posts: 24
- Joined: Fri Dec 28, 2018 7:36 am
Re: modifying a turntable for UK voltage (from US)?
I have a step down transformer for my 64 Fender Concert, you don't want to modify these things.
- sal paradise
- PAT. # 2.972.923
- Posts: 3745
- Joined: Thu May 27, 2021 12:41 am
Re: modifying a turntable for UK voltage (from US)?
Worth saying those turntables go for about £200 here. You can get a 90s amp super cheap, so I guess it depends whether your shipping costs go up or not to bring your gear over.
I have nothing to offer anybody, except my own confusion?
- noisepunk
- PAT. # 2.972.923
- Posts: 16807
- Joined: Sat Apr 03, 2010 5:55 pm
- Location: glasgow, scotland
- Contact:
Re: modifying a turntable for UK voltage (from US)?
that's what i was seeing on the ol' ebay– i guess if i got over my sentimental attachments i could sell mine, buy the same one, and maybe come out with a bit of extra money in the end.sal paradise wrote: ↑Mon Jun 07, 2021 2:15 amWorth saying those turntables go for about £200 here. You can get a 90s amp super cheap, so I guess it depends whether your shipping costs go up or not to bring your gear over.
knowing that an external transformer is so inexpensive, that probably makes the most sense assuming it isn't a pain to even bring it. honestly, it kind of sounded like a fun project– i've been meaning to either build a nicer plinth for it or refinish it pretty much since i got it, and i figured tearing into it to make it UK compliant (or, ideally, switchable voltage and a power socket i could plug different cables into) would just be another good reason to finally do that.
i'm kind of talking myself out of it, but still open to advice if anyone has actually done this.
- andy_tchp
- PAT. # 2.972.923
- Posts: 8120
- Joined: Fri Apr 02, 2010 1:36 am
- Location: Brisbane
Re: modifying a turntable for UK voltage (from US)?
I think they're a DC motor(?) equipped deck so should be 'fine' on a step-down transformer (AC motor would likely have speed issues as the power frequency changes too (230V@50Hz in Scotland vs 120V@60Hz in USA).
I'd be more worried about transporting it half way round the world. Do you have the relevant packing bits/boxes or some other method to stop the arm flailing around while it's 'delicately' handled by about 10 different pairs of hands through the international freight process?
I'd be more worried about transporting it half way round the world. Do you have the relevant packing bits/boxes or some other method to stop the arm flailing around while it's 'delicately' handled by about 10 different pairs of hands through the international freight process?
"I don't know why we asked him to join the band 'cause the rest of us don't like country music all that much; we just like Graham Lee."
David McComb, 1987.
David McComb, 1987.
- andy_tchp
- PAT. # 2.972.923
- Posts: 8120
- Joined: Fri Apr 02, 2010 1:36 am
- Location: Brisbane
Re: modifying a turntable for UK voltage (from US)?
Also, Rega turntables are made in the UK, I don't know what the pricing is like over there but they're incredible bang for buck, even over here where we no doubt pay a shitload more for them.
"I don't know why we asked him to join the band 'cause the rest of us don't like country music all that much; we just like Graham Lee."
David McComb, 1987.
David McComb, 1987.
- noisepunk
- PAT. # 2.972.923
- Posts: 16807
- Joined: Sat Apr 03, 2010 5:55 pm
- Location: glasgow, scotland
- Contact:
Re: modifying a turntable for UK voltage (from US)?
yeah, it has a DC motor, it's also rated for both frequencies, so that wouldn't be an issue. i've also thought about how many hands everything is going to have to pass through and am pretty confident in my packing abilities.
regas look nice–i know a lot of folks on here that live outside of the us have them; i forgot they were made in the uk, and while it doesn't look like the new ones are much more affordable there than they would be here (save postage i'm guessing), a used one wouldn't be bad. thanks for the tip, good to have a clear option in mind if i do sell.
regas look nice–i know a lot of folks on here that live outside of the us have them; i forgot they were made in the uk, and while it doesn't look like the new ones are much more affordable there than they would be here (save postage i'm guessing), a used one wouldn't be bad. thanks for the tip, good to have a clear option in mind if i do sell.
- pocaloc
- PAT. # 2.972.923
- Posts: 1729
- Joined: Tue Aug 04, 2009 2:40 pm
- Location: Spokane, WA
Re: modifying a turntable for UK voltage (from US)?
What has you moving to Scotland? Just curious, sounds cool.
- noisepunk
- PAT. # 2.972.923
- Posts: 16807
- Joined: Sat Apr 03, 2010 5:55 pm
- Location: glasgow, scotland
- Contact:
- sal paradise
- PAT. # 2.972.923
- Posts: 3745
- Joined: Thu May 27, 2021 12:41 am
Re: modifying a turntable for UK voltage (from US)?
As soon as you set foot in Scotland you get 90% better at writing power pop songs.
I have nothing to offer anybody, except my own confusion?
- JSett
- PAT. # 2.972.923
- Posts: 9114
- Joined: Mon Jun 01, 2009 1:33 pm
- Location: Old Hampshire, Old England
Re: modifying a turntable for UK voltage (from US)?
I dont think you'd struggle to get a replacement transformer over here to be honest. There's still plenty of radio/hi-fi repairmen dotted around that could probably source one for you and wiring it in would be a breeze.
Or find a donor turntable. I think a lot of these Pioneer ones used almost the same transformer as each other. I've used ones from about 2 or 3 different ones of the era to repair PL-12d units (my favourite bargain turntable of choice).
Or find a donor turntable. I think a lot of these Pioneer ones used almost the same transformer as each other. I've used ones from about 2 or 3 different ones of the era to repair PL-12d units (my favourite bargain turntable of choice).
Silly Rabbit, don't you know scooped mids are for kids?